1. DL manuals
  2. Baby Jogger
  3. Bicycle Accessories
  4. Bicycle Accessories
  5. Assembly Instructions Manual

Baby Jogger Bicycle Accessories Assembly Instructions Manual

Manual is about: Baby Jogger Bicycle Accessories User Manual

Summary of Bicycle Accessories

  • Page 1

    Assembly instructions for tailwind trailer and switchback trailer hybrid read these instructions carefully before use and keep them for future reference. Your children’s safety may be affected if you do not follow these instructions. 1 2 3 1 2 3 1 2 3 these products comply with astm f1975-02 tailwin...

  • Page 2

    • warning: avoid serious injury from falling or sliding out. Always use safety harness(es). • always use the crotch strap(s) in combination with the waist belt(s). • warning: securely attach hitch and safety strap prior to use. Failure to do so can cause an accident and result in a serious injury. •...

  • Page 3

    Frame warning: ensure that all locking devices are engaged before use. Failure to do so could cause the trailer to collapse. 1 set wheels aside for now. 2 before unfolding trailer frame, you will need to unsnap storage straps on both sides. These are located near the trailer handle. 3 flip trailer f...

  • Page 4

    2 rear wheels • to install rear wheel, gently slide the wheel’s rear axle into the trailer’s axle end until you hear it click into place. • to remove rear wheels, simply push the red release button on the trailer’s rear axle while pulling the wheel out. Important: to ensure the wheel is properly sec...

  • Page 5

    Tow bar warning: failure to lock tow bar’s quick release skewer properly to the frame could cause an unstable condition resulting in serious injury or death. 1 locate tow bar under front end of trailer frame. 2 pull tow bar up and to the side. 3 insert tow bar into frame bracket by pushing down on t...

  • Page 6

    4 securing hitch to bicycle 1 rear wheel with lock nut 2 remove lock nut (turning counterclockwise) from bicycle’s rear wheel hub. The adaptor piece isn’t needed on this style hub, you may want to store it for future need. Mount hitch to bicycle’s rear wheel bolt with lock nut and tighten (turning c...

  • Page 7

    5 warning: failure to properly tighten bicycle’s quick release skewer could cause hitch failure and wheel loss resulting in a serious injury or death. Securing hitch to bicycle rear wheel with quick release skewer (use only a standard chromoly steel skewer. Trailer mounting bracket is not designed f...

  • Page 8

    3 4 now you will need to prepare the tow bar so that it can connect to the hitch already on the bicycle. Release the trailer’s quick release pin from tow bar. Insert tow bar into hitch and secure with trailer quick release pin. Securing hitch to bicycle.

  • Page 9

    Warning: do not use the hitch if you cannot properly install the back-up safety strap to your bicycle. Failure to properly install and tighten quick release skewer or axle nut could cause hitch failure and wheel loss resulting in a serious injury or death. Do not ride without a flag. Failure to use ...

  • Page 10

    1 lay trailer back so it is resting on handle with front end in the air. Secure tow bar under trailer making sure to push down at center of tow bar until it clicks into place and the lock lip is over the tow bar. 2 to store the trailer quick release pin, insert pin into front of trailer as shown. (t...

  • Page 11

    Applies to switchback trailer hybrid model only when in stroller mode front wheel fork legs 1 tip trailer back on its handle to reveal the front fork. 2 slide front wheel fork legs into the closed position until they lock into place. Axle flats forktips 3 insert front wheel into forktips by aligning...

  • Page 12

    10 cantilever latch cable guide tube accordion cable protector 4 pull on cable guide with your right hand while pushing the cantilever latch with your thumb. With your left hand push the other caliper arm toward your right hand and secure cable guide tube into cantilever latch. You will have to pull...

  • Page 13

    11 rear wheel parking brake adjusting hand brake • if you do not have good braking action, simply squeeze the brake handle five or six times. If the problem persists, loosen the brake’s cylinder ring to adjust the small ring, and then move the small ring away from the handle to tighten the cable. (p...

  • Page 14

    12 safety flag warning: do not ride without flag in place. Failure to use the high visibility flag could results in an otherwise avoidable accident. Note: make sure to remove the safety flag before folding trailer. 1 locate flag and connect both parts of flag pole together. 2 insert flag pole into f...

  • Page 15

    13 warning: failure to use the mesh cover could expose your child(ren) to flying rocks and other debris. Please make sure to have the mesh cover closed at all times. 2 during cooler weather use the rain flap to keep child(ren) warmer. 3 during warm weather you can roll rain flap up. Secure rain flap...

  • Page 16

    14 safety harness 1. To make the necessary adjustments to the safety harness, detach the trailer seat padding from the back of the trailer to reveal the webbing straps. 2. To adjust shoulder straps, hold plastic guide and slide webbing strap to lengthen or shorten. 3. To make shoulder straps longer,...

  • Page 17

    15 4 5 • not for use at high speed, do not exceed 10 mph and 6 mph around corners. • refer to the number on the tire wall for the optimum pressure for your tires. • check tire pressure before each use. • maximum weight capacity – 100 lbs (45 kg) (combined passenger(s) and baggage weight.) • children...

  • Page 18

    Folding 1 stand in front of trailer to locate the fold handle straps on each side. Pull on fold handles with a snap and lift up to fold. 2 to keep trailer in the closed position when folded, secure storage strap to its partner strap located on the opposite side of the trailer frame when folded. You ...

  • Page 19

    Hitch maintenance check the hitch and back up safety straps are properly secured to trailer before every ride. Periodically check the hitch for damage or cracks; if any damage is found do not use trailer! Any damage/deterioration on any parts of your trailer, should be replaced immediately to reduce...

  • Page 20

    Bjc trailer 3.1.07 baby jogger is a division of dynamic brands 8575 magellan parkway, suite 1000 • richmond, va 23227 t: 800.241.1848 • f: 804.262.6277 www.Babyjogger.Com thank you! We wish you many happy journeys with your new trailer! Your trailer is a great product, and we are proud to manufactur...