Read these instructions carefully before use and keep them for future reference. Your child’s safety may be affected if you do not follow these instructions. Www.Babyjogger.Com pod assembly instructions.
2 • avoid serious injury from falling or sliding out. Always use safety harness(es). Always use the crotch strap(s) in combination with the waist belt(s). • do not install a car seat or any other seating device not approved by the manufacturer inside this chassis. • make no modifications to this cha...
1 1 remove chassis from box and set wheels aside. 2 insert handlebar into handlebar attachment brackets until both sides click into place. 3 to unfold the chassis: lift handle up and away from the lower frame until it clicks into place. 4 turn chassis upright and attach red safety strap to snap loca...
2 canopy 1 lay chassis back so the handle is resting on the ground. Locate the white support rod at the top rear of the pod seating compartment. 2 insert support rod into black canopy brackets located on each side of the frame. 3 locate the white support rod at the top center of the pod seating comp...
3 1 to install rear wheels: insert wheel axle into wheel mount on chassis frame until it clicks into place. Note: ensure the wheel is properly secured to frame, test by gently trying to pull the wheel out after installing. 2 to remove rear wheels: press the wheel release button while sliding the whe...
4 for use with a single passenger: warning: when used with only one child, the child must be seated in the center seating position. 3 buckle center waist belt. 2 place child in center seating position. Buckle harness yoke to center crotch strap buckle. 1 buckle shoulder straps of harness yoke into c...
5 for use with two passengers: 3 buckle the waist belt. 2 place child in right seating position. Buckle harness yoke to the crotch strap buckle. (the center crotch buckle will not have a harness yoke attached.) 1 buckle shoulder straps of harness yoke into two right buckles on back of seat. 4 repeat...
6 2 rethread webbing strap through front of harness yoke to hold in place. 1 thread webbing strap through plastic guide on upper buckle to lengthen or shorten. To adjust crotch strap: 1 thread webbing strap through plastic guide on lower buckle to lengthen or shorten. To adjust waist belt: 1 thread ...
7 to adjust shoulder harness height: 2 unclip harness yoke from seat back. 1 pull mesh seat back down to expose upper harness buckles. 3 slide the buckle down to desired height. 5 fasten harness buckle to seat back and repeat on other side. 4 thread harness yoke through lower opening on mesh seat ba...
8 the handlebar on the pod has two height adjustments. 2 flip the handlebar over and reinsert into handlebar attachment brackets until both sides click into place. 1 press buttons on each side of the handlebar attachment brackets while pulling the handle tubing out. To adjust the height of the handl...
9 1 squeeze the hand brake to give you better control over your stroller while jogging or running or while strolling on uneven terrain. 2 to rotate the hand brake’s position on the handle bar, loosen the bolt using the supplied allen wrench. Rotate the hand brake assembly on the handlebar until it i...
10 bug canopy storage & folding 1 completely unzip bug canopy. 2 roll bug canopy up to the top of the pod. 3 secure bug canopy in place by using the provided loops and barrels. To store the bug canopy: 1 unsnap red safety strap. Stand in front of chassis. Pull fold handles and lift up to fold. 2 con...
Seat and frame care • the chassis seat and frame can be wiped cleaned using a soft, damp cloth. Windows • plastic windows can crack at low temperatures. If chassis is stored or left in cold weather you will need to let it warm up before folding or unfolding. Wheels and axles • check wheels for loose...
12 trailer kit jogger kit the pod offers three different conversion kits for stroller, jogger, or trailer mode (sold separately) allowing you to choose how you want to use your pod. All conversion kits are easy to install with no tools necessary so you are free to change your activity on the go. The...
13 baby jogger's warranty: baby jogger warrants that the frame is free of manufacturer defects for 5 years from date of purchase. Manufacturer’s defects include but are not limited to the breaking of welds and frame tube damage. Textile or soft side materials and all other components shall be warran...
We wish you many happy journeys with your new pod! Your pod is a great product, and we are proud to manufacture it. If you have any questions or comments, please give us a call at: 1.800.241.1848 baby jogger is a division of dynamic brands 8575 magellan parkway, suite 1000 • richmond, va 23227 t: 80...
