1. DL manuals
  2. Baby Lock
  3. Sewing Machine
  4. A-LINE Natalie BL18A
  5. Getting To Know Manual

Baby Lock A-LINE Natalie BL18A Getting To Know Manual - Setting The Stitch

Other manuals for A-LINE Natalie BL18A: Instruction And Reference Manual
Manual is about: A-Line Series

Summary of A-LINE Natalie BL18A

  • Page 1

    Model bl18a getting to know: a-line series baby lock consumer helpline: 800-313-4110 www.Babylock.Com.

  • Page 2: Model Bl18A

    Model bl18a when it comes to sewing projects, natalie is a friend you can trust. With convenient features such as 15 built-in stitches, a needle threader and a 4-step buttonhole, this machine is perfect for beginning sewers. Straightforward and reliable, natalie is always there to help with mending,...

  • Page 3: Winding The Bobbin

    Winding the bobbin 1 1. Pull the handwheel out to the right. 2. Draw the thread from the spool. Guide the thread around the bobbin winder thread guide. 3. Insert the thread through the hole in the bobbin from the inside to the outside. Put the bobbin on the bobbin winder spindle. 4. Push the bobbin ...

  • Page 4: Threading The Bobbin Case

    Threading the bobbin case 2 1. Place the bobbin into the bobbin case. Make sure the thread unwinds in the direction of the arrow. 2. Pull the thread into the bobbin case slot. 3. Draw the thread under the tension spring and into the delivery eye. * leave about 4 inches of free thread. 1 2 3 tension ...

  • Page 5

    Removing & inserting the bobbin case 3 1. Open the hook cover. 2. Raise the needle by turning the handwheel toward you. Take out the bobbin case by holding the latch. 3. When inserting the bobbin case, pull and hold the latch and then place the bobbin case into the hook as far in as possible..

  • Page 6: Threading The Machine

    Threading the machine 2. While holding thread near spool, draw thread down into the tension area and then around the check spring holder. 3. Firmly draw thread up and through the take-up lever from right to left. 4. Then draw thread down and slip it into the lower thread guide. 5. Draw thread down a...

  • Page 7: Using The Needle Threader

    Using the needle threader 2 1. Raise the needle to its highest position. Pull down the needle threader knob as far as it will go. 2. Turn the knob in the direction of the arrow in the illustration, and then insert threader hook into the needle eye. Lead the thread around threader guide and under thr...

  • Page 8: Drawing Up The Bobbin Thread

    Drawing up the bobbin thread 1. Raise the presser foot and hold the needle thread lightly with your left hand. 2. Turn the handwheel slowly toward you with your right hand until the needle goes down and continue turning the handwheel until the take-up lever is at its highest position. Lightly pull u...

  • Page 9: Setting The Stitch

    Setting the stitch 7 stitch pattern selector dial raise the needle above the fabric and match the desired pattern with the setting mark by turning the pattern selector dial. Selecting stretch stitch patterns when sewing stretch stitches, set the stitch length dial at “s.S.” stitch length dial place ...

  • Page 10: Starting to Sew

    Starting to sew 8 straight stitch sewing (1) pattern selector dial: a or b (2)presserfoot:zigzagfoot (3) thread tension: 2 - 6 (4) stitch length: 1.5 - 4 • • b 4 3 2 1 1. Raise the presser foot and position the fabric next to a stitching guide line on the needle plate. Lower the needle into the fabr...

  • Page 11: Natalie'S

    Natalie's appliqué denim jacket dress up a denim jacket by easily turning fun printed fabric into appliqué designs, then add a few quick embellishments for an extra sparkle. For other exciting projects like this one, visit www.Totallystitchin.Net and www.Babylock.Com 9 note: you may need to open up ...

  • Page 12

    Lbin-bl18a.