1. DL manuals
  2. Baby Trend
  3. Stroller
  4. 7311
  5. Instruction Manual

Baby Trend 7311 Instruction Manual

Manual is about: Tandem Stroller

Summary of 7311

  • Page 1

    01.06 instruction manual convenience through innovation and thoughtful design sit n stand lx tandem stroller with car seat snap n go attachment system model #7311 read all instructions before assembly and use of product. Keep instructions for future use..

  • Page 2: Warning:

    Warning: please follow all of these instructions to ensure the safety of your child. Keep these instructions for future reference. Warning: failure to follow these instructions could result in serious injury or death. Avoid serious injury from falling or sliding out. Always use the safety belts and ...

  • Page 3: Parts

    To ensure safe operation of your stroller, please follow these instructions carefully. Retain these instructions for future reference assembly 1. Remove stroller from box. The front wheels, rear wheels, child tray, and canopy need to be installed prior to use. 2. To attach the front wheels, unfold s...

  • Page 4: Warning:

    6. To attach the front child tray, push the tray onto the front frame tube, lining up the tray between the protruding rivet and the seat. Push backward on the latch until snapped into place. The protruding rivet on the outside of the frame tube should be above the tray latch. Check that the tray is ...

  • Page 5

    1. Have child sit on the jump seat facing backwards. Secure the seat belt, which is attached to the back of the seat, around the childʼs waist, and buckle to the crotch strap. See fi gure 11. 2. Adjust the seat belt to be snug around the childʼs waist. 3. To release, apply pressure to both sides of t...

  • Page 6: Warning:

    Brakes warning: always set brakes when the stroller is not being pushed so that the stroller will not roll away. Never leave stroller unattended on a hill or incline as the stroller may slide down the hill. 1. To engage brakes, apply light downward pressure to the brake lever located on each rear wh...

  • Page 7

    To unfold stroller to unfold stroller do not allow children near stroller while unfolding. 1. Release the folding latch, which is located on the right side. See fi gure 18. 2. Lift up on the stroller handle with both hands until the stroller frame is erect and locked in the open position. The strolle...

  • Page 8: Instruction Manual

    01.06 instruction manual convenience through innovation and thoughtful design 8 read all instructions before assembly and use of product. Keep instructions for future use. Sit n stand lx tandem stroller with car seat snap n go attachment system model #7311.

  • Page 9: Car Seat Chart

    Figure 1. 9 car seat chart snap n go attachment the snap n go attachment system is easily confi gured to carry most infant car seats in the market. New infant car seats are introduced by various manufacturers from time to time and may not be listed below. If you have an infant car seat not listed bel...

  • Page 10: Warning:

    Step 1: remove the child tray. Insert the snap n go bar into the two plastic fi ttings located on the lower frame tube of the stroller. Please see fi gure 1. The bar will lock into place with the metal snap button popping into the hole in the plastic fi tting. Check that the snap button is fully engagi...

  • Page 11: Cosco Designer 22

    Cosco designer 22 ® and designer 35 ® please follow the following instructions for proper installation of your infant car seat. Installation of the cosco ® designer 22 ® and designer 35 ® infant car seat 1. Place front seat in the reclined position. With one hand grasp the car seat handle (in its up...

  • Page 12: Peg Perego

    Peg perego ® primo viaggio ® please follow the following instructions for proper installation of your infant car seat. Installation of peg perego ® primo viaggio ® infant car seat 1. Place front seat in the reclined position. With one hand grasp the car seat handle (in its upright, carrying position...

  • Page 13: Evenfl O

    Evenfl o ® cozy carry ® please follow the following instructions for proper installation of your infant car seat. Installation of the evenfl o ® cozy carry ® infant car seat 1. Place front seat in the reclined position. With one hand grasp the car seat handle (in its upright, carrying position) and ge...

  • Page 14: Evenfl O

    Evenfl o ® on my way ® please follow the following instructions for proper installation of your infant car seat. Installation of the evenfl o ® on my way ® infant car seat 1. Place front seat in the reclined position. With one hand grasp the car seat handle (in its upright, carrying position) and gent...

  • Page 15: Evenfl O

    15 evenfl o ® embrace ® please follow the following instructions for proper installation of your infant car seat. Installation of the evenfl o ® embrace ® infant car seat 1. Place front seat in the reclined position. With one hand grasp the car seat handle (in its upright, carrying position) and gentl...

  • Page 16: Century

    16 century ® vante ® please follow the following instructions for proper installation of your infant car seat. Installation of the century ® vante ® infant car seat 1. Place front seat in the reclined position. With one hand grasp the car seat handle (in its upright, carrying position) and gently pl...

  • Page 17: Graco Snug Ride

    17 graco snug ride ® please follow the following instructions for proper installation of your infant car seat. Installation of the graco ® snug ride ® infant car seat 1. Place front seat in the reclined position. With one hand grasp the car seat handle (in its upright, carrying position) and gently ...

  • Page 18: Cosco Arriva

    Cosco arriva please follow the following instructions for proper installation of your infant car seat. Installation of the cosco ® arriva ® infant car seat 1. Place front seat in the reclined position. With one hand grasp the car seat handle (in its upright, carrying position) and gently place the s...

  • Page 19

    Baby trend latch-loc, flex-loc forward bt bar figure 2. Figure 1. Position “4” please follow the following instructions for proper installation of your infant car seat. Installation of the baby trend ® latch-loc ® infant car seat 1. Remove (unscrew) the snap bar from the snap n go attachment. 2. Wit...