Baby Trend 8166BC Instruction Manual

Manual is about: SAFAri babies Trend Nursery Center

Summary of 8166BC

  • Page 1

    Model #8166bc instruction manual convenience through innovation and thoughtful design safari babies trend nursery cen ter 08.06 read all instructions before assembly and use of product. Keep instructions for future use..

  • Page 2: Before

    Safari babies trend nursery center read all instructions before assembly and use of playard. Keep instructions for future use. Warning: failure to follow these warnings and the assembly instructions could result in serious injury or death from entrapment, strangulation, suffocation, etc. Warning: in...

  • Page 3: To Assemble Playard

    Contents (fig. 1-1): 1 playard 1 mattress 2 leg extensions (1 left,1 right) 2 leg extensions with wheels (1 left, 1 right) 1 travel or storage bag before you begin: the baby trend playard is designed so that, when properly setup, the fabric of the playard places pressure on the 4 top rails making th...

  • Page 4: Warning:

    Warning: all top rails must be straight and locked in position or child may become entrapped and suffocate. See figure 9 and 10. 5. Place mattress in playard with padded side up (fig. 11). Note: do not insert mattress if using bassinet feature. Go to bassinet instructions. 6. Feed the 6 hook and loop...

  • Page 5: Folding Playard

    Figure 1 figure 2 figure 5 5 figure 3 figure 4 folding playard 1. Undo the 6 hook and loop straps holding mattress from underneath playard floor. (if mattress is not used in the bassinet). Remove mattress and set aside. 2. Grasp the center floor lock handle pushing down. Rotate the handle counter-cloc...

  • Page 6: Warning:

    Baby trend, inc. 1567 s. Campus ave. Ontario, ca 91761 customer service hot line: (800) 328-7363 8:00 a.M. To 4:30 p.M. Pacific standard time 6 playard bassinet/changing area warning: failure to follow these warnings and the assembly instructions could result in serious injury or death from entrapmen...

  • Page 7: To Assemble Your Bassinet

    7 note: playard must be in a locked set-up position before installing and using the bassinet feature. Contents (fig. 1): 1 nylon bassinet insert 4 metal support tubes 2 (male) (2 female) assembly 1. Insert the 2 female tubes into the two male tubes. (fig. 2) 2. Insert the 2 assembled tubes through t...

  • Page 8: Warning:

    8 contents (fig. 1): • 2 long curved bars • 2 short bars with connector knobs • 1 changing area fabric warning: avoid serious injury or death: • always use restraint belt to prevent falls • use changer with infant who’s weight is less than 18 lbs (8.2 kg ) and is less than 25 inches (63.5 cm) tall. ...

  • Page 9

    9 figure 5. Figure 6. Figure 7. Figure 8. Note: short bar with connector knobs should be facing inward. 5. Place connector knob prongs into holes located on corner pieces of playard (fig. 5). 6. Turn connector knobs counter clockwise to lock (fig. 6). 7. Flip changing area to inside of playard (fig....

  • Page 10: Fig. 1

    How to use changing table restraint fig. 1 fig. 2 place child on changing table, make sure hands and arms are clear of the restraint. Bring the restraint around the child's waist and clip the male and female ends of the buckle together. See fig 1 2. Tighten strap until fits snug around child's waist...

  • Page 11: To Install Toy Bar

    11 1. Attach the toy bar to each end of the playard opposite of the changing table. Clip the plastic hooks onto the top rails of the play yard. (fig. 3.) to install toy bar figure 3. Removal 1. Remove mattress from bassinet (fig.1). 2. Lift bassinet out of playard (fig. 2). The bassinet is now ready...