Baby Trend Blue Moon Owner's Manual - Booster Car Seat

7.  Pull the vehicle lap/shoulder belt across front

   of child and buckle vehicle seat belt. 

  -  Vehicle shoulder belt on buckle side 

    must be under armrest. 

8. Place vehicle shoulder belt in Vehicle 

  Shoulder Belt Positioner and adjust 

  to position shoulder belt on child.

      - Thread harness strap through 

        Vehicle Shoulder Strap Positioner 

        as shown.

      - Pull up or down on the 

         webbing adjuster until the 

         vehicle shoulder belt is 

         centered over the child’s 

          shoulder.

     -  Check to be sure vehicle shoulder 

         belt is properly positioned over 

         shoulder and snug against child.

NOTE:  Some vehicle shoulder belts with emergency locking

            retractors allow child to pull belt out and change position of 

            belt. Use of shoulder belt positioner helps maintain proper 

            position of shoulder belt.

65

8.0

 Booster Car Seat 

 (

Without

 Built-in Harness)

  Installation and Use

2.  Tuck harness adjustment belt up under front of 

the seat base.

3. Assemble Vehicle Shoulder Belt Positioner to 

back of Car Seat (see “Assembly and Removal of 

Vehicle Shoulder Belt Positioner” section). 

4. Place the car seat on the vehicle seat in a  location equipped with 

a Lap/Shoulder Belt and centered between the Lap/Shoulder belt 

anchorages (see “Selecting a Vehicle Seating Locations” section). 

WARNING!

   • Do not place the Backless Booster 

    Car Seat in a seating position that 

    has only a vehicle lap belt. 

5.  If the vehicle seat back is adjustable, adjust 

  into the upright position or the position 

 specifiedinthevehicleowner’smanual

  for use with a car seat.

6.  Place child in Backless Booster Car Seat 

  with child’s back and rump contacting 

  seating surfaces.

66

8.0

 Booster Car Seat 

 (

Without

 Built-in Harness)

  Installation and Use