Babybrezza Safe+Smart Instruction Manual - page 5
Smart Bottle Warmer Mobile App
The Smart Bottle Warmer can be set up straight from your mobile device.
Download and install the Baby Brezza Smart Bottle Warmer app located in the app store.
Bluetooth is required on your mobile device to connect to the Baby Brezza Smart Bottle Warmer.
Press on the Smart Bottle Warmer to turn it on.
Ensure that your mobile device is
at most 20 ft. from the bottle warmer.
7
Once connected, the setup screen will display on your mobile device.
Setup Interface
Setting Scroll
Starting
Temperature
Scroll
Timer
Volume Control
Setting Guide
Warming
Speed
Scroll
Start/Cancel
Button
In the Baby Brezza App, press to sync your
phone to your Smart Bottle Warmer. Ensure that
bluetooth connectivity is on in your mobile device.
Press the “Start” button on your
mobile device to beginning warming.
Scroll through each setting by pressing on the
arrow keys or swiping up or down on each column.
or
Use the setting guide if you need assistance
choosing the correct warmer setting.
Timer will begin counting down. If bottle
warming needs to be stopped for any reason,
simply press the “cancel” button to stop heating.
When a warming cycle is cancelled, the timer will reset to the start time of the last setting used. Adjust the
warming settings accordingly and press “start” to begin a new cycle.
8
Prepare your bottle and bottle warmer.
Place bottle into bottle warmer
Add water to bottle warmer based on your setting
or
CAUTION: Allow the bottle warmer to cool before starting a new warming cycle.