Babycare TENS Elle TENS 2 Instructions For Use Manual - Specifications
Specifications
Unit Size
115mm x 55mm x 30mm
Unit Weight
75 grams
Output Jacks
CE Touch-proof jacks
Display
Digital LCD - 8 seven segment digits and around
95 segments
Automatic Power Off
Will switch off after 5 minutes if not used
Battery Low Detect
2.2v ± 0.2v
Battery
2 x 1.5v AA Battery (Type LR6)
Operating Environment
Temperature 0-40˚C
Air humidity 30-75%
Air pressure 700 hPa-1060 hPa
Storage and Transport
Environment
Temperature 0-40˚C
Air humidity 30-90%
Air pressure 700 hPa-1060 hPa
General
Programme
Display
Output Frequency / Duration
Burst
Burst 1
Pulse Frequency (16Hz) Pulse Width (150
애s)
1 burst per second, 8 pulses per burst*
Burst
Burst 2
Pulse Frequency (32Hz) Pulse Width (150
애s)
2 bursts per second, 8 pulses per burst*
Boost
Boost 1
Pulse Frequency (80Hz) Pulse Width (150
애s)
continuous*
Boost 2
Boost 2
Pulse Frequency (100Hz) Pulse Width (150
애s)
continuous*
Output Channel
Dual Channel
Output Waveform
Symmetrical bi-phasic rectangular
Output Voltage
0 - 55v zero to peak adjustable in 15 steps at 500
Ω load
Output Intensity
0 - 110mA adjustable in 15 steps at 500
Ω load Intensity
level will drop back to zero after programme changes
Technical Specifications
Equipment type
Dual Channel Digital TENS
Classification
This unit is fully compliant with EEC Directive 93/42/EEC,
classified as internally powered equipment type BF.
It is intended for continuous operation.
* Default pulse width after mode changed (pulse width not changed when switched between BURST
and BOOST mode) 5 selectable pulse widths in all modes: 50, 100, 150, 200, 250
16
* Pulse width adjustment does not change when switching between Burst and Boost modes.
Default pulse width is 150
애s. There are 5 adjustable pulse widths selectable in all modes: 50, 100, 150,
200 and 250
애s.
ElleTENS2InstructionManual2017_Layout 1 12/09/2017 17:00 Page 16