Babyletto Crayson Mini Crib Assebly And Operation Manual

Page of 8

Download

Print this page

Bookmark us

page 1

Grayson Mini Crib (6998) - Assembly and Operation Manual

Congratulations on purchasing a MDB Family product. This crib will provide many years of service if you adhere

to the following guidelines for assembly, maintenance, and operation. This crib is for residential use only.

Any institutional use is strictly prohibited.

Please be sure to follow the instructions for proper assembly. Do not use power screwdrivers. All of our cribs are

made from woods. Please understand that woods have color variations which are the result of nature and are not

defects in workmanship.

DO NOT SUBSTITUTE PARTS. ALL MODELS HAVE THE SAME QUANTITY OF PARTS AND HARDWARE.

YOUR MODEL MAY LOOK DIFFERENT FROM THE ONE ILLUSTRATED DUE TO STYLISTIC VARIATIONS.

revised 01JUN2011

Meijer.com

1 2 3 4 5 6 7 Next › »

Summary of Crayson Mini Crib

Page 1
Page 1 grayson mini crib (6998) - assembly and operation manual congratulations on purchasing a mdb family product. This crib will provide many years of service if you adhere to the following guidelines for assembly, maintenance, and operation. This crib is for residential use only. Any institutiona...
Page 2: Crib Parts
Crib parts page 2 c. Base board d. Pad b side panel (2) e. Long base board support bar (4) f. Short base board support bar (4) tools needed (not included) phillips screwdriver a. Head panel (2) meijer.Com.
Page 3: Hardware
Hardware page 3 step 1. Attach base board support bars (e & f) to all head panels (a) and side panels (b) using 1-9/16” allen head bolts (h5). Use the allen wrench (h6) to secure the bolts. Insert cam bolts (h3) to head panels (a). Insert cam locks (h4) to side panels (b). Step 2. A. Head panel b si...
Page 4: 3A.
Page 4 step 4. Place the base board (c) into the crib frame. Step 3. Assemble side panels (b) and head panels (a). C. Base board 3a. Align the cam bolt and cam lock and insert the cam bolt to side panel. Make sure cam bolt is passing through the cam lock. 3b. Insert the cam lock nut. 3c. Rotate the ...
Page 5: 6A.
Step 6. Attach 4 casters (h7) to the bottom of 4 crib legs using 1-1/8” allen head bolts with caps (h2). 6a. Align the caster to the bottom of leg. 6b. Bolt the caster to the bottom of leg using h2 and h7. Step 5. Locate the base board (c) onto the support bars. Secure base board (c) using 2-1/8” al...
Page 6
D. Pad step 7. Place the pad (d) onto the base board (c). And the crib is ready to use. Page 6 ways to fold and store: 1. Remove the pad (d) and base board (c) from the crib frame. 2. Fold the base board (c) and the crib frame. 3. Slide in the base board (c) to crib frame as illustrated. Slide base ...
Page 7: Keep Instructions
Page 7 please refer to the label (sample below) on the inside face of the headboard. Record the model/ item number and serial number of your crib, the name of the store where you made the purchase, the date of purchase and the wood finish in the box to the lower right. We will ask you for your seria...
Page 8: Warning
Read all instructions before assembling crib. Keep the manual for future use. Warning failure to follow these warnings and the instruc- tions could result in serious injury or death. ● the product, including side rails, must be fully erected prior to use. ● make sure latches are secure. ● strings ca...