1. DL manuals
  2. Babyletto
  3. Baby & Toddler Furniture
  4. Mercer Crib
  5. Assembly And Operation Manual

Babyletto Mercer Crib Assembly And Operation Manual

Manual is about: M6801

Summary of Mercer Crib

  • Page 1

    Mercer crib (m6801)- assembly and operation manual congratulations on purchasing this product. This crib will provide many years of service if you adhere to the following guidelines for assembly, maintenance, and operation. This crib is for residential use only. Any institutional use is strictly pro...

  • Page 2: Crib Parts

    B. Side panel (2) a. End panel (2) c. Spring frame g. Left post (2) page 2 e. Post bracket (4) f. Guard rail d. Glide support (2) crib parts h. Right post (2) m. Drawer back k. Left drawer side i. Drawer center j. Right drawer side l. Drawer front n. Drawer bottom (2) o. Left bearing glide p. Right ...

  • Page 3: Hardware

    Attach 4 post brackets (e) to each pair of left and right posts (g+h) using 3 phillips head screws (s). Step 1. Step 2. Page 3 hardware zz. Allen wrench tools needed (not included) phillips screwdriver v. 3/4” allen head bolt (4) t. 1 1/4” phillips head screw (12) s. 5/8” pan head wood screw (12) w....

  • Page 4

    Step 3. Mount glide support (d) on each end panel (a), inserting the wood dowels into the pre-drilled holes. Secure using 1 1/4” phillips head screws (t). Step 4. Page 4 step 5. Attach end panel assembly to side panel (b) using head bolts (w). T d d u u u o or p attach the left bearing glide (o) to ...

  • Page 5

    Step 6. Swing out the four hangers at the corners of the spring frame (c). Be careful to avoid scratching the crib finish. Attach the spring frame flat side up. Choose the proper level for the mattress, starting at the highest level and adjust it down as the child grows. Secure the spring frame to t...

  • Page 6

    Step 9. Step 10. Position the drawer back (m) on the drawer assembly and secure it with woodscrews (t). Page 6 step 10b step 10a slide the bearing glide rails out fully as illustration step 10a shown. Position the drawer on tabs on the glide rails. Attach the drawer to the rails with four 3/8” phill...

  • Page 7

    Please read the caution and warning statements insert before using your crib. Page 7 before placing your mattress in the crib, you can make your own mattress protector by cutting the cardboard packing insert to 27” x 51”. Place it on the spring frame under the mattress to extend the life of the matt...

  • Page 8: Warning:

    Warning: failure to follow these warnings and assembly instructions could result in serious injury or death. Read all instructions before assembling crib. Keep the manual for future use. Warning: ● strings can cause strangulation! Do not place items with a string around a child’s neck, such as hood ...

  • Page 9: Warning:

    Mercer crib (m6801)- toddler bed conversion assembly warning: the minimum age to use toddler bed conversion rail shall not be less than 15 months and the maximum weight shall not be greater than 50 lbs. Failure to follow these warnings and the assembly instructions could result in serious injury or ...