BaByliss 5224U User Manual - Heat Settings

marker on the cord is visible immediately stop pulling on the cord 

as it is now fully extended. (Pulling beyond this point could cause 

damage).

Heat Settings

•  Select the required heat and speed settings. There are 2 heat / speed  

settings plus a cool shot. Use the high heat and high speed settings 

for initial drying and use the low heat and speed settings for styling 

as the hair begins to dry and for scrunch drying.

Cool Shot Button

Use the cool shot button on warm hair to rapidly cool the hair and set 

the style in place for a long lasting style.

Rewinding the Power Cord

Caution: The cord and plug move quickly whilst rewinding, so to avoid 

injury, follow the instructions carefully.

•  Push the retract button with one hand and hold the cord or plug with 

the other hand to carefully control the cord as it rewinds into the 

dryer.

CARE OF YOUR HAIRDRYER

To keep your hairdryer in the best possible condition, please follow the 

steps below:

•  Do not wrap the lead around the hairdryer, rewind the power cord 

following the instructions (see ‘Rewinding the Power Cord’ section).

• Do not use the hairdryer at a stretch from the power point.

• Always unplug after use.

Cleaning the filter

• Ensure the appliance is switched off, unplugged and cool.

• Using a soft brush, clean any hair and other debris from the filter.

•  To clean the outside of the hairdryer, wipe with a damp cloth. Make 

sure that no water enters the hairdryer and the hairdryer is completely 

dry before use.