BaByliss 7565U Manual - Removing A Comb Guide
Changing the comb guide length setting
The comb guides will be marked with its grade settings (fig.4). In order
to change the grade setting release the comb guide locking mechanism
found on the side of the clipper (fig.5) and rotate the comb guide either
clockwise or anti-clockwise as appropriate (fig.6). Line up the grade
setting you want with the ‘I’ mark on the clipper. Make sure that the
locking mechanism is in the locked position and the comb guide is
securely in place before using the clipper.
removing a comb guide
To remove the comb guide unclip the guide-locking mechanism found
on the side of the clipper and rotate the comb guide in an anti-clockwise
direction until it is completely free of the clipper.
preparation for Use
• Always inspect the appliance for noticeable signs of damage. Do not
use if damaged (see UK After Sales Service).
• Always inspect the appliance before use to ensure the clipper blades
are free from hair, debris etc. (see Cleaning & Maintenance of clipper).
• Ensure the appliance is well oiled (see Oiling Instructions).
• Ensure the appliance is sufficiently charged or plugged into the mains.
• For best performance use on clean, dry hair that has been combed
until tangle-free.
• If hair is long, use the scissors and comb provided to cut the hair prior
to using the clipper.