BaByliss Pro Perfect Curl BAB2665U User Manual - Temperature Settings

TEMPERATURE SETTINGS 

There  are  3  temperature  settings  to  select  from;  190°C,  210°C  and 

230°C. We recommend you always start with the lowest temperature 

setting and increase the level of heat as required.

• Setting I (190°C) - for delicate, fine or coloured hair

• Setting II (210°C) - for normal textured hair

• Setting III (230°C) - for thick or wavy hair

TIME SETTINGS

There are 3 timer settings with audio beep indicator.  These different 

settings will give different curl effects. The longer the time the hair is 

held inside the curl chamber, the more defined the curl will be. But 

results will also vary according to hair type. Use the following as a 

guide.

• Setting 8 (8 seconds = 3 beeps) - for loose waves

• Setting 10 (10 seconds = 4 beeps) - for soft curls

• Setting 12 (12 seconds = 5 beeps) - for more defined curls

Audio off Setting

The  automatic-beep  indicator  can  be  turned  off  if  not  required  by 

sliding the timer switch to ‘0’.

NOTE: When the ‘0’ setting is selected there will be no beep indicator 

to advise when to release the styler. Take extra care when using this 

setting.

CURL DIRECTION SETTING (Right/Left/Auto)

Use the Curl direction control to choose either a uniform or natural 

finish. Select the curl direction by sliding the switch to either left ‘L’ or 

right ‘R’.

When styling the left side of the hair, slide the curl direction switch to 

the left position - ‘L’. When styling the right side of the hair, slide the 

switch to the right position - ‘R’. This ensures that the curl sits towards 

the face on both sides of the head and will give a more uniform style.