BabyOno 888 Instruction Manual - page 4
of
7
6. Assemble the backrest panel as illustrated.
Figure 5
7. Push crotch portion of seat pad inside out to form seat, so the fabric is on inside of pad.
Figure 6
8. Insert the 8 round tabs on the seat pad into slots located around the seat ring, slide tabs
through holes. Turn tray up side down. Pull tabs and align into grooves. You may have to
push tabs from top of walker to properly Fasten.
Figure 7
9. Test: Push down hard on seating area of seat pad to make sure seat is securely in place.
CAUTION: Do not use walker if all tabs are not secured properly, otherwise child may
fall through walker.
Figure 8