BABYSTYLE LUX SBD Instruction Manual

Summary of LUX SBD

  • Page 1

    12 this instruction manual © babystyle uk limited 2006 all rights reserved. Lux s3d 0950/110806 care and maintenance cont. • rubber tyres can leave marks on some surfaces. The tyres can react with some surfaces (vinyl floor coverings, carpets etc.) and cause stains. Always stand the stroller on a pr...

  • Page 2

    2 contents pram body sit-up board the pram body is equipped with a sit-up board. The sit-up board is for use as a backrest when your child is ready to sit up. The sit-up board can be erected/reclined to three positions or folded into the sleeping position. To erect the sit-up board lift the top of t...

  • Page 3

    10 picture 7 picture 8 adjusting the footrest important safety information to adjust the footrest, press the button at the top of the footrest and lift or lower the footrest to the desired position. 1. Warning: a child’s safety is your responsibility 2. Warning: children should never be left unatten...

  • Page 4

    Primary features 4 correct position for car seat adaptor picture 5 back of chassis front of chassis using the safety harness always apply the parking brake before placing your child in the vehicle. The safety harness has two shoulder straps, two waist belts and a crotch strap. Place the two shoulder...

  • Page 5

    8 5 fitting the seat unit to the chassis (attachment device) the seat unit can be fitted to the chassis to face either forwards or backwards. To fit the seat unit to the chassis, locate the retaining bars found on the seat unit sides on the attachment device in the correct position (see pictures 3 &...

  • Page 6

    Fitting the pram body to the chassis 7 fitting the seat unit facing backwards to fit the pram body to the attachment device on the chassis, locate the retaining bars on either side of the pram body in the forwardmost position of the attachment device (picture 1). Gently push the pram body down until...