Bacharach 24-1400 Operation & maintenance manual - Cleaning The Printer
Instruction 24-9450
10
Maintenance
IrDA Printer
Cleaning the Printer
External surfaces of the printer may be kept clean by simply wiping with
a damp cloth .
Do not
use any solvents that may attack the plastic case . Be
sure that the inside surfaces are kept dry at all times .
Cleaning the Print Head
To maintain a good print quality, it is recommended that the print head
be cleaned at least once a year or up to once a month if the printer is used
heavily . The print head should be cleaned immediately, however, if the
print becomes visibly fainter due to contamination of the print head .
Material Required:
• Isopropyl Alcohol
• Cotton swabs
Procedure:
1 . Switch OFF printer .
CAUTION:
Allow the print head to cool before cleaning,
otherwise damage to the print head may occur.
2 . Open paper cover and remove paper roll .
3 . Using a cotton swab dampened with alcohol, wipe the heating dots
of the print head .
Be careful not to touch the heating dots with your
fingers.
4 . Allow the alcohol to dry .
5 . Reload the paper and close the paper cover .