Bacharach GDX-350 Instructions - page 2
GDX-350 Transmitter
Replacing a Calibrated Sensor
5600-9002 (Rev 1)
- 2 -
7.
Apply power to the GDX-350 transmitter.
NOTE: The new sensor is automatically recognized by the GDX-350 transmitter.
The sensor identification screen is displayed at power-up after the new sensor has
been installed.
8.
After installing the new sensor, the
sensor identification screen is displayed:
• automatically after power-up
• manually by viewing INPUT Type in
the SENSOR SETTINGS/INFO menu.
Figure 2. Sample Sensor Identification Screen
9.
If the installed sensor type does not
match one of those in the GDX-350
transmitter library, an error screen is
displayed. Refer to operation manual for
the GDX-350 Transmitter (P/N:
5600-9001) for detailed error screen
information.
Figure 3. Sample Sensor Error Screen
10.
After the sensor identification screen is displayed, the sensor has been successfully installed
and is ready for use.
11.
Additional information on span and calibration functions is contained in the operation
manual for the GDX-350 (refer to P/N: 5600-9001).
∇ ∇ ∇
Headquarters:
621 Hunt Valley Circle, New Kensington, PA 15068-7074
Toll Free: 1-800-736-4666 • Tel: +1-724-334-5000 • Fax: +1-724-334-5001
Website: www.MyBacharach.com • E-mail:
help@MyBacharach.com
Printed in U.S.A.
® Registered Trademark of Bacharach Inc.