Bacharach PCA 400 Quick Start Manual
®
Front
Side
Bottom
6
8
7
9
10
12
11
Warm Up: 60 seconds
1
2
3
4
60-SECOND
WARM-UP
IMPORTANT: Ensure that the water trap assembly is
clean, dry, and properly assembled.
WARNING: This analyzer is not intended to be used as a
safety device.
WARNING: This analyzer has not been designed to be
intrinsically safe for use in areas classified as hazardous
locations.
IMPORTANT: Check for obvious signs of splits and / or
cracks in the tubing.
IMPORTANT: Perform power up and initialization in
fresh air to ensure proper calibration.
IMPORTANT: Address / acknowledge any faults or errors
discovered during initialization.
IMPORTANT: Perform routine maintenance (replacing
sensors, calibrating, etc.) as outlined in the PCA
®
400 User
Manual
(P/N 0024-9551).
IMPORTANT: Ensure that the analyzer has sufficient
charge before operation. If in doubt, recharge lithium-ion
battery, replace disposable batteries, or provide power
via the AC adapter and USB cable.
1
Pistol-Grip Probe
2
PCA
®
400 Combustion Analyzer
3
Sample Line with Quick Connectors
4
Water Trap & Filter Assembly
5
IrDA Communications Port (Not Shown)
6
Full Color LCD Touch Screen
7
Back, Home & Power Keys (Left to Right)
8
Navigation & Enter Keys
9
Micro-B USB Connector
10
T-Air Connector
11
T-Stack Connector & Sample Ports
12
Pressure Low Side (-∆P)