Bacharach Portable Monitor Bladder Bag Replacement Instruction Manual

Page of 4

Download

Bookmark us

Scope

These instructions describe how to replace the bladder bag in the Portable Monitor shown in Figure 1.

It is assumed that the user is familiar with the operation of the appropriate monitor. If necessary, refer to the instruction manual for

detailed operation and maintenance information. Table 1 provides a list of the appropriate instructions for each model.

Model Type

Instruction Manual

Refrigerant

3015-4584

3015-4787

3015-5150

3015-4403

Table 1: Part Number Information

Items Required:

•

Replacement Bladder Bag Kit - PN 3015-5325 (includes bladder bag, Velcro loop, Velcro hook, and instruction sheet)

•

Medium Phillips Head Screwdriver

•

Small Flat Blade Screwdriver

•

Tubing cutter

Figure 1 – Portable Monitor

Portable Monitor Bladder Bag

Replacement

Instruction 3015-5545

Rev. 1 – December 2011

1 2 3 4 Next › »

Page 1
Scope these instructions describe how to replace the bladder bag in the portable monitor shown in figure 1. It is assumed that the user is familiar with the operation of the appropriate monitor. If necessary, refer to the instruction manual for detailed operation and maintenance information. Table 1...
Page 2
Portable monitor bladder bag replacement 2 instruction 3015-5545 rev 1 disassembling the chassis gain access to the bladder bag by disassembling the monitor’s metal chassis as follows: 1. Unplug battery pack from monitor. 2. Remove monitor and its battery pack from the soft carrying case. 3. Remove ...
Page 3
Portable monitor bladder bag replacement instruction 3015-5545 rev 1 3 replacing the bladder bag 1. Remove the tubing connection that connects the t-fitting to the bladder bag. Remove tubing from both connection points and lay aside. 2. Remove the old bladder bag by separating the velcro pieces on t...
Page 4
Portable monitor bladder bag replacement 4 instruction 3015-5545 rev 1 5. To place bladder bag in position, fold bag in half lengthwise and insert the folded edge into the corner of the rear panel. Hold seam in corner and open the fold to contact the adhesive side of the two velcro pieces. Press bag...