Bacharach Tru Pointe Ultra HD Operation And Maintenance - page 13
9
Tru Pointe® Ultra
Instruction 0028-9000
SoundBlaster
®
Applications
The SoundBlaster
®
is an excellent tool for weatherizing buildings by detecting leaks in windows,
doors and roofs. To effectively use the SoundBlaster
®
and Tru Pointe
®
Ultra HD to check for
building leaks:
1.
Place the SoundBlaster
®
in the room to be leak tested and turn it ON
2.
From outside the room begin scanning for leaks with the Tru Pointe
®
Ultra around
the perimeters of the doors and windows.
3.
If the Tru Pointe
®
Ultra HD reading is at ‘10’, reduce the sensitivity until the
detector reads 4-5 and begin scanning again. Readings above the 4-5 threshold
indicate a larger leak and should be fi xed prior to leaks that register under the
threshold.
4.
A clear pattern of high and low readings should develop and pinpoint the location
of the highest priority leaks.
Other SoundBlaster
®
applications include locating, air/water leaks in automobile windshields,
trunk seal leaks, truck body leaks, and tanker leaks.