Back Doctor LUXURY PLUS Product Manual - page 7
Method of usage
3. Turn off power, stop massage
•
Pressing the power button during the massage will stop all functions, and the backrest and
footrest will return to its original position automatically. Meanwhile, you can set up the
memory function. If the rated working time finishes, the massage functions will turn off but
the backrest and footrest won't return to their original positions.
•
Memory Store Function: After the rated working time or when the product is switched off,
the hand controller displays "Memory", asking the user whether they would like to store the
massage mode before turning off the machine. You can press the memory function buttons
“M1”, “M2” or “M3” to store the massage mode.
Function
Button
Display
Memory Massage
SA 1 Memory
SA 2 Memory
SA 3 Memory
•
Cut off the power of the whole machine.
Diagram of the switch position of power supply
Power switch method map
NOTE: While the calf rest is lifted, do not lean on or apply your body weight to the calf rest as
seen below.
Method of usage
4. Calf rest linkage pole installation
•
Open the packaging. (Figure 1)
•
Switch it on, then move the massage chair through manual controller to the position as
shown below. (Figure 2)
•
Take off the linkage pole from the seat, align it with the hole, then insert the pin. (Figure 3)
•
The installation is now finished. (Figure 4)
•
After the linkage pole is installed through the manual controller to restore the backrest, you
are ready to install the calf rest. (Figure 5)
9
10