1. DL manuals
  2. Backyard
  3. Grill
  4. BY16-101-003-04
  5. Assembly Instructions Manual

Backyard BY16-101-003-04 Assembly Instructions Manual

Other manuals for BY16-101-003-04: Operating Instructions Manual

Summary of BY16-101-003-04

  • Page 1

    By16-101-003-04 / english 1/12 by16-101-003-04 outdoor lp gas barbecue grill assembly instructions before getting started with the assembly: select a level surface that does not have cracks or openings to avoid any small components or hardware from getting lost. Level surface must be smooth/soft to ...

  • Page 2

    By16-101-003-04 / english 2/12 exploded view (components you should have).

  • Page 3

    By16-101-003-04 / english 3/12 parts list (components you should have) part parts description quantity 1 lid 1 2 lid plastic pad 2 3 lid handle 1 4 lid hinge 2 5 warming rack 1 6 cooking grid 1 7 heat tent 2 8 fire bowl assemble 1 9 side shelf 2 10 control knob 2 11 grease cup 1 12 right front leg 1...

  • Page 4

    By16-101-003-04 / english 4/12 assembly instructions step 1 install left brace (17) to left front leg (14) and left rear leg (15), using m6x12 bolt (a) to fasten. Step 2 insert leg cap (22) to left legs (14 and 15) and fasten with m6 x 12 bolt (a)..

  • Page 5

    By16-101-003-04 / english 5/12 step 3 install right brace & tank holder assemble (16) to right front leg (12) and right rear leg (13), fasten by m6 x 12 bolt (a). Step 4 penetrate the tank bracket (19) to the square hole of right legs (12 and 13) as shown. Round holes in legs and tank bracket must b...

  • Page 6

    By16-101-003-04 / english 6/12 step 5 connect cart front panel (23) to the assembled cart frame with m6 x 12 bolt (a). Step 6 install rear brace (18) to back of assembled cart frame with m6x12 bolt (a). Hints: if ignition system fails to spark, use match holder which attached to (14) left front leg ...

  • Page 7

    By16-101-003-04 / english 7/12 step 7 place fire bowl assemble (8) onto assembled cart frame and fasten with m6x12 bolt (a). Step 8 place the control knobs (10) onto the shafts..

  • Page 8

    By16-101-003-04 / english 8/12 step 9 tighten about 1/2 of its thread length of m6x12 bolt (a) to both sides of fire bowl assemble (8), letting have 6mm gap for temporarily laying side shelves as shown in figure 9.1 hang side shelves (9) to the m6x12 bolt (a) and press down as shown in figure 9.2 fu...

  • Page 9

    By16-101-003-04 / english 9/12 step 11 place assembled lid (1) to fire bowl assemble (8), insert rolling pin (e) through the holes of lid hinge and fire bowl hinge, then lock the rolling pin with retainer (c). Step 12 place warming rack (5) to the grill step by step as shown in figure 12.1 through 1...

  • Page 10

    By16-101-003-04 / english 10/12 step 13 place heat tent (7) inside fire bowl on top of burners. Step 14 place the cooking grid (6) on fire bowl..

  • Page 11

    By16-101-003-04 / english 11/12 step 15 slide grease cup (11) into the slot under fire bowl from the back of grill installation of gas barbecue completed! Should you encounter any problem and for assistance, contact our customer service at: customercare@henergy-group.Com or 1-844-827-7693 henergy gr...

  • Page 12

    By16-101-003-04 / english 12/12 replacement parts list part # parts description part # parts description 1 lid 11 grease cup 2 lid plastic pad 12 right front leg 3 lid handle 13 right rear leg 4 lid hinge 14 left front leg 5 warming rack 14a match holder 6 cooking grid 15 left rear leg 7 heat tent 1...