Hanging lounger 272-3265 instruction manual.
Assembly instructions for hanging lounger, model # 4717rb, sku 272-3265 thank you for purchasing the hanging lounger. We hope it provides years of enjoyment. Please read and follow the assembly and safety instructions for proper assembly and safe use of this product. If you are missing parts or if t...
Hardware hardware and assembly tools are located within the hardware bag. Keep bag for hardware storage when not in use. Part o parts p parts q (x2) parts r parts s (x6) part t part u part v (x4) part w (x2) part x parts y part z (x2) parts p : one 3 ½” 16mm double threaded bolt with two 16mm washer...
Step 1: locate part a and part b. Connect part b to part a by inserting end of part b onto swedge end of part a aligning holes as shown in (diagram 1). Place a 13mm washer onto part q (2 ¾” bolt) and insert through both part a & b (box 1), place a second 13 mm washer onto bolt and then a 13 mm lock ...
Step 4: locate parts y. Insert square nut into nut slot on bottom of o-ring of part h, as shown in box 7. Then insert hand knob of part y through the hole of part h as in box 8. Straighten the part h assembly so the hand knob is just below the hanging hook as shown in box 9, then tighten hand knob s...
Step 7: locate parts r (3 ¾” bolt with 13mm washer) and insert through one of parts e. Place part u (closed s-hook) onto the bolt part r as shown in box 13. Place the second and opposite part e onto the bolt part u as shown in box 14. Place 13 mm washer and 13mm lock nut onto end of part r and tight...
S t e p part g part f 10 step 10: locate part f. Insert ends of part f onto swedge ends of both parts g as shown in box 19, by pushing down lock- pins as in box 20 until pins are fully engaged in lock holes as shown in box 21. Box 19 box 20 box 21 step 11: locate padded arms parts j. Attach each par...
Step 13: locate part m and place inside seat frame as shown in box 25. Next, locate black rope (part k) and attach part m to seat frame by first threading rope through the middle grommet of part m and pulling half of the rope through the grommet. Lace part m with rope over frame and through each gro...
S t e p 16 step 16: place the plastic protective caps (part s) over the heads and the nuts on the chair frame as shown in photo. Congratulations! Your hanging lounger is now complete. • please always follow the safety instruction and use common sense when using the hanging lounger. • the hanging lou...
