1. DL manuals
  2. Backyard Creations
  3. Indoor Furnishing
  4. BJ390
  5. Assembly And User's Manual

Backyard Creations BJ390 Assembly And User's Manual

Manual is about: 2-Person Glider Set

Summary of BJ390

  • Page 1

    Assembly and user manual if you have any questions, concerns or need additional parts please do not return to the place of purchase. Contact our customer service department toll free at 1-855-880-7205 for further instructions. The schmatics in this manual are for assembly and operation illustration ...

  • Page 2: Contents

    2 3 contents warning and cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 care and maintenence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 hardware contents . . ....

  • Page 3: Preparation

    2 3 before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and diagram above. If any part is missing or damaged, do not attempt to assemble the product or return to the place of purchase. Contact our customer service toll free at 1-855-880-720...

  • Page 4: Hardware Contents

    4 5 part picture description quantity m bolt(m6 x 15) 12 n bolt (m6 x 45) 16 o bolt (m6 x 55) 8 p bolt (m6 x 35) 12 q bolt (m6 x 70) 4 r steel washer 80 s nut 28 t plastic washer 28 u bolt cap 52 v nut cap 28 w inner hexagon wrench 1 x outer hexagon wrench 1 (m6) hardware contents.

  • Page 5: Package Contents

    Package contents please lay out all parts prior to assembly or installation. Read instructions prior to assembly or installation. 5 part picture description quantity a right armrest 2 b left armrest 2 c back leg connecting tube 2 d swing pole 4 e table top support bracket (small) 1 f table top suppo...

  • Page 6: Assembly Instructions

    7 step 1: attach swing pole (d) to left leg (j) and right leg (k) with m6*45 bolt (n), plastic washer (t), steel washer (r) and m6 nut (s), as shown above. Do not overtighten the bolts. Step 2: attach back leg connecting tube (c) to left leg (j) and right leg (k) with m6*15 bolt (m), steel washer (r...

  • Page 7: Assembly Instructions

    7 step 3: attach upper collecting tube (l) to left leg (j) and right leg (k) with m6*55 bolts (o), and m6 nut (s) as shown above. Do not overtighten the bolts. Step 4: attach left armrest (b) and right armrest (a) to swing pole (d) with m6*45 bolt (n), plastic washer (t), steel washer (r) and m6 nut...

  • Page 8: Assembly Instructions

    8 step 5: place table top (h) on a clean and soft level surface. Then attach table top support brackets (small) (e) and table top support bracket (large) (f) to table top (h)with m6*15 bolt (m) and steel washer (r) as shown above. Do not overtighten the bolts. Step 6: attach left and right seat conn...

  • Page 9: Assembly Instructions

    8 step 7: turn the table over, insert left and right seat connecting brackets (g) into upper connecting tube of left & right leg (l). Attach it with m6*55 bolt (o), steel washer (r), and m6 nuts (s) as shown above. Do not overtighten the bolts. Step 8: repeat step 7 to attach other side of the table...

  • Page 10: Assembly Instructions

    Step 9: attach back (i) to left (b) & right armrest (a) with m6*70 bolt (q), pplastic pad (t), steel washer (r), m6 nuts (s) as shown above, do not tighten the bolts too much. Then attach seat (i) to left (b) & right armrest (a) with m6 x35 bolt (p) and steel washer (r) as shown above. Do not overti...

  • Page 11: 90 Day Warranty

    90 day warranty this product is covered under a manufacturer’s 90 day warranty from date of purchase against defects in materials and workmanship. This warranty does not cover damage due to neglect, abuse or weather related damage. For full warranty disclosure, email us at customerservice@atleisure....

  • Page 12

    For additional product information, please contact our customer service center at 1-855-880-7205 between 8am- 5pm eastern time, monday through friday. 2015 distributed by menard, inc., eau claire, wi 54703 made in china.