Backyard Creations OOCCHE2-32 Owner's Manual - page 6
6
STEP 4. Thread four long Allen screws (S1) through the outer ring (G) tube and into the legs.
Thread four short Allen screws (S1) through the outer ring (G) tabs and into the legs.
Check the alignment of the legs. Securely tighten all bolts and nuts from steps 1~4 with two adjustable
wrenches (or 14mm sockets/wrenches) and the Allen wrench (T3).
STEP 5. Attach the small cooking grid (K) to the tall post (H) with a wing bolt (S3).
Thread the cooking grid handle (F) onto the end of the cooking grid.
Repeat Step 5 for the large cooking grid (J), short post (I), and grid handle (F).
STEP 6. Slide the ends of the posts down into the openings in the post legs.
Note: The spring bolts (T1) engage the holes in the posts to hold them at the desired height. Pull the
spring bolts out to allow the posts to move up and down. Release the spring bolts to lock them in place.
Each cooking grid post can be adjusted to one of three heights.
S1
S0
G
K
F
H
S3
T1