Backyard Creations SRFP41301 Instruction Manual - Care and Maintenance
14
Care and Maintenance
, and fireplace
is cool to the touch.
Lighting
1. Make sure there is only a small amount of ash in the bottom of the bowl.
2. Place a layer of dry kindling or a natural fire-starter onto the center of the grate.
3. Place above that a layer of dry seasoned hardwood that is no more than 3/4 the diameter of the bowl.
4. Use a match to light kindling or fire-starter.
5. Using the hook that is provided and heat resistant gloves, replace spark guard screen once the
kindling or fire-starter is lit.
Tending the Fire
You may need to shift and/or add logs for an ideal experience.
DO NOT place a hot spark guard screen or hot fireplace
tools onto combustible surfaces such as grass
wooden deck or furniture.
1. Using the hook that is provided and heat resistant gloves, carefully remove spark guard screen.
2. While using a long handled fireplace tool, shift coals and logs to allow additional airflow.
3. DO NOT add gasoline, kerosene, diesel fuel, lighter fluid or alcohol to relight or enhance an existing
fire.
4. Wait until glowing coals have developed before adding any additional wood. If additional wood is
required, place wood on top coals, be careful not to shift ashes.
Extinguishing
1. Allow fire to burn itself out.
2. DO NOT use water to extinguish as this is dangerous and can cause damage to this outdoor fire pit.
Inspecting
Cleaning
Storage
safety and longer
the finish.
The weight printed on the carton is an average number and just for reference ONLY.
If damage to any component is detected, do not operate until repairs are made.