1. DL manuals
  2. Backyard Discovery
  3. Outdoor Furnishing
  4. 1505513
  5. Owner's manual

Backyard Discovery 1505513 Owner's manual

Manual is about: 10x10 PERGOLA OUTDOOR PRODUCT

Summary of 1505513

  • Page 1

    10x10 pergola outdoor product model: # 1505513 made in china ins-1505513-a-(10x10) pergola-eng 1-24-18 save this assembly manual for future reference in the event that you need to order replacement parts. For the most up to date assembly manual, to register your product or to order replacement parts...

  • Page 3: Stop

    Please have the following information when you make your call: 1 – model number of the product located on the front of the assembly manual 2 – desription of the part from the parts list por favor tenga visible la siguiente informaciÓn cuando llame: 1 - nÚmero de modelo del producto que se encuentra ...

  • Page 4

    Owner’s manual outdoor product eng owner op-2012 dear customer: please read entire booklet completely before beginning the assembly process. Structures are not intended for public use. The company does not warranty any of its residential structures subjected to commercial use such as: recreational p...

  • Page 5

    Owner’s manual outdoor product eng owner op-2012 maintenance instructions: 1. Check all nuts and bolts twice monthly during the usage season and tighten as required. (but not so tight that you crack the wood) it is particularly important that this procedure be followed at the beginning of each seaso...

  • Page 6

    Outdoor product assembly manual faqs: 1. Is the wood treated with chemicals? Backyard discovery uses 100% chinese cedar wood which is naturally bug resistant, decay and rot resistant. To help ensure your families safety, our wood is completely chemical free and we do not use pressure-treated wood. T...

  • Page 7

    (level 24") (square) (tape measure) (cordless drill or electric drill) (drill attachments: phillips head & 5/16" socket driver) (an adult w/ an adult helper) (rubber mallet - optional) (ladder) (phillips screw driver) tools required for installation: (these are the tools that are generally required ...

  • Page 8: Basic Setup Dimensions

    Basic setup dimensions place the set on level ground, concrete or grass. Backyard discovery recommends at least 6 ft [2 m] from any structure or obstruction such as a fence, garage, house, overhanging branches, laundry lines, or electrical wires. Important assembly notes 1) while assembling unit, ta...

  • Page 9

    Parts identification wood components (not to scale) d4 - joist - w4l04587 1 3/8"x5 1/4"x90" (36x134x2286) (2) d6 - joist end - w4l04588 1 3/8"x5 1/4"x15" (36x134x381) (12) d9 - short angle brace - w4l04594 1 3/8"x5 1/4"x29 3/4" (36x134x755) (8) wp1 - pergola post - w4l04584 5 1/2"x5 1/2"x89 1/2" (14...

  • Page 10

    Parts identification hardware vp - bolt wh 5/16x7-1/4 blk - h100196 (34) vm - bolt wh 5/16x2-1/2 blk - h100194 (18) cq - concrete anchor 1/4" x 2" - h100120 (17) - t -4 0 t o r x w r e n c h - a 1 0 0 0 4 1 (2 ) vx - lag screw wh 5/16x5-1/2 blk - h100204 (15) vw - screw pfh 8x1/2 blk - h100203 (2) v...

  • Page 11: Accessories

    Parts identification accessories (not to scale) ht - foot 142 square post - a100029 (4) xr - byd id tag (small) without ages - a100241 (1) sq - "a" revision tag - a100314 (1) (1) stain marker - lt brn-2uv - a6p00170

  • Page 12

    Step 1 repeat process for opposite side. ***hand tighten only at this time.*** nut barrel wh 5/16x7/8 blk (4 plcs) washer lock ext 12x19 blk (4 plcs) bolt wh 5/16x2-1/2 blk (4 plcs) washer lock ext 8x19 blk (4 plcs) d9 - short angle brace - w4l04594 1 3/8"x5 1/4"x29 3/4" (36x134x755) (4) bolt wh 5/1...

  • Page 13

    Step 2 repeat process for opposite side. Washer lock ext 8x19 blk (8) bolt wh 5/16x2-1/2 blk (8) washer lock ext 12x19 blk (8) nut barrel wh 5/16x7/8 blk (8) bolt wh 5/16x2-1/2 blk (4 plcs) washer lock ext 8x19 blk (4 plcs) nut barrel wh 5/16x7/8 blk (4 plcs) washer lock ext 12x19 blk (4 plcs) d9 - ...

  • Page 14

    Step 3 repeat process for opposite side. Bolt wh 5/16x7-1/4 blk (4 plcs) washer lock ext 8x19 blk (4 plcs) washer lock ext 12x19 blk (4 plcs) nut barrel wh 5/16x1-1/2 blk (4 plcs) lag screw wh 5/16x3 blk (2 plcs) washer lock ext 8x19 blk (2 plcs) 90" joist - support assembly washer lock ext 8x19 blk...

  • Page 15

    Nut barrel wh 5/16x1-1/2 blk (8) washer lock ext 8x19 blk (12) bolt wh 5/16x7-1/4 blk (8) washer lock ext 12x19 blk (8) lag screw wh 5/16x3 blk (4) step 4 repeat process for opposite side. Washer lock ext 8x19 blk (2 plcs) lag screw wh 5/16x3 blk (2 plcs) bolt wh 5/16x7-1/4 blk (4 plcs) washer lock ...

  • Page 16

    D6 - joist end - w4l04588 1 3/8"x5 1/4"x15" (36x134x381) (4) nut barrel wh 5/16x1-1/2 blk (4) washer lock ext 8x19 blk (4) washer lock ext 12x19 blk (4) bolt wh 5/16x7-1/4 blk (4) nut barrel wh 5/16x1-1/2 blk (4 plcs) washer lock ext 12x19 blk (4 plcs) bolt wh 5/16x7-1/4 blk (4 plcs) washer lock ext...

  • Page 17

    Nut barrel wh 5/16x1-1/2 blk (4) washer lock ext 12x19 blk (4) washer lock ext 8x19 blk (4) bolt wh 5/16x7-1/4 blk (4) step 6 nut barrel wh 5/16x1-1/2 blk (4 plcs) washer lock ext 12x19 blk (4 plcs) bolt wh 5/16x7-1/4 blk (4 plcs) washer lock ext 8x19 blk (4 plcs) d6 - joist end - w4l04588 1 3/8"x5 ...

  • Page 18

    Washer lock ext 8x19 blk (4 plcs) bolt wh 5/16x7-1/4 blk (4 plcs) washer lock ext 12x19 blk (4 plcs) nut barrel wh 5/16x1-1/2 blk (4 plcs) washer lock ext 12x19 blk (4) nut barrel wh 5/16x1-1/2 blk (4) washer lock ext 8x19 blk (4) bolt wh 5/16x7-1/4 blk (4) step 7 d6 - joist end - w4l04588 1 3/8"x5 ...

  • Page 19

    Washer lock ext 8x19 blk (4 plcs) bolt wh 5/16x7-1/4 blk (4 plcs) nut barrel wh 5/16x1-1/2 blk (4 plcs) washer lock ext 12x19 blk (4 plcs) d6 - joist end - w4l04588 1 3/8"x5 1/4"x15" (36x134x381) (2) washer lock ext 12x19 blk (4) nut barrel wh 5/16x1-1/2 blk (4) washer lock ext 8x19 blk (4) bolt wh ...

  • Page 20

    Lag screw wh 5/16x5-1/2 blk (14 plcs) washer lock ext 8x19 blk (14 plcs) washer lock ext 8x19 blk (14) lag screw wh 5/16x5-1/2 blk (14) step 9 align counter bored holes in slotted joists with pre-drilled holes in bottom joists and ends. Joist spacing flush d3 14 3/4 approx. " (6 spcs) d3 - slotted j...

  • Page 21

    Screw pfh 8x2-1/2 blk (7 plcs) screw pfh 8x2-1/2 blk (7) right left step 10 right side view p1 p2 6 1/4" p1 - long purlin - w4l05476 1 3/8"x1 3/8"x70 3/4" (36x36x1798) (1) p2 - short purlin - w4l05477 1 3/8"x1 3/8"x38 5/8" (36x36x981) (1).

  • Page 22

    Screw pfh 8x2-1/2 blk (7 plcs) left right left side view screw pfh 8x2-1/2 blk (7) step 11 p1 p2 7 11/16" p1 - long purlin - w4l05476 1 3/8"x1 3/8"x70 3/4" (36x36x1798) (1) p2 - short purlin - w4l05477 1 3/8"x1 3/8"x38 5/8" (36x36x981) (1).

  • Page 23

    Left right right side view screw pfh 8x2-1/2 blk (70) step 12 assemble remaining p1 and p2 purlins alternating locations as shown in steps 10 and 11. Screw pfh 8x2-1/2 blk (70 plcs) p1 p2 p1 p2 7 11/16" (10 spcs) p1 - long purlin - w4l05476 1 3/8"x1 3/8"x70 3/4" (36x36x1798) (10) p2 - short purlin -...

  • Page 24

    Step 13 decide where to place the pergola; grass, concrete or other material. Place the pergola exactly where it will be anchored when completed and slide a foot 'ht' under each post 'wp1'. Note: if not placing on concrete, proceed to step 17. Ht - foot 142 square post - a100029 (4) wp1 wp1 wp1 wp1 ...

  • Page 25

    Step 14 use chalk to trace around the edges of each foot 'ht'. Ht 117 7/8" 117 7/8" 1 2 3 4 5 6 7 8 9 1 0 1 1 1 2 1 3 1 4 1 5 1 3 1 2 1 1 1 0 9 8 7 6 5 4 3 2 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 ! Square posts and tigh...

  • Page 26

    Concrete anchor 1/4" x 2" (16 plcs) concrete anchor 1/4" x 2" (16) step 15 move the pergola aside. Place each foot 'ht' inside of the lines drawn in step 14. Using a 3/16" concrete drill bit, pilot drill attachment holes into the concrete pad. Next, use the 1/4"x2" concrete anchors to attach each fo...

  • Page 27

    Step 16 set the pergola back in place, setting each post 'wp1' inside an 'ht' foot.. Ht ht ht ht wp1 wp1 wp1 wp1.

  • Page 28

    Screw pfh 8x1-1/2 blk (4 plcs) screw pfh 8x1-1/2 blk (16) step 17 attach 'ht' feet to each 'wp1' post using 1-1/2" deck screws into each side of foot, as shown. Wp1 ht.

  • Page 29

    Screw pfh 8x1/2 blk (2 plcs) screw pwh 8x5/8 blk (2 plcs) sq - "a" revision tag - a100314 (1) xr - byd id tag (small) without ages - a100241 (1) screw pwh 8x5/8 blk (2) screw pfh 8x1/2 blk (2) 6" 10 7/16" step 18 place i.D. Placard on front of post approximately as shown. Place revision tag on rear ...

  • Page 30

    Limited warranty this limited warranty by backyard discovery applies to products manufactured under the backyard discovery brand or its other brands including but not limited to backyard botanical, adventure playsets, and leisure time products. Backyard discovery warrants that this product is free f...

  • Page 31: Notes:

    Notes:.

  • Page 32: Notes:

    Notes:.