- DL manuals
- Backyard Discovery
- Play Sets & Playground Equipment
- 1605336
- Owner's Manual
Backyard Discovery 1605336 Owner's Manual
Summary of 1605336
Page 1
Made in china features the fastening system. Save this assembly manual for future reference in the event that you need to order replacement parts. • owner's manual • frequently asked questions • assembly instructions • warranty information scenic heights playhouse model: # 1605336.
Page 2
General safety instructions purpose this product is intended for outdoor, domestic use only. It is not suitable for commercial or medical use. Danger for children warning! No eating while using the product this product may only be used with adult supervision at all times. The packaging material is n...
Page 3: Safety Instructions
In certain areas during winter, snow buildup and the low temperatures can damage the product. It is recommended to remove snow buildup and to store the product indoor. We strongly recommend visual inspections every 3 months to insure the integrity of the entire product. Replace any parts as necessar...
Page 4
Consumer information sheet for playground surfacing materials the us consumer product safety commission (cpsc) estimates that about 100 000 playground equipment- related injuries resulting from falls to the ground surface are treated annually in us hospital emergency rooms. Injuries involving this h...
Page 5
Play house assembly manual faqs: 1. Does the area for the play house need to be level? Yes. We recommend the play house be positioned on a flat level area for maximum safety and durability. Any stakes provided should be used to secure it firmly to the ground. 2. What size area is recommended for the...
Page 6
(level 24") (open end wrenches 1/2") (square) (tape measure) (3/8" drive ratchet, 1/2" std sockets 1/2" deep sockets) (claw hammer) (cordless drill or electric drill) (an adult w/ an adult helper) (rubber mallet - optional) (ladder) (phillips screw driver) (drill attachments: phillips head) (7/16" d...
Page 7: «Spanish
«spanish safe play area diagram safe play area: • the safe play area refers to a zone extending 6' beyond the play product on all sides, including the space above the play product. • the ground surface must be level. Installing your play product on sloping ground can cause it to lean or "rack". This...
Page 8: Basic Setup Dimensions
2'-10 3/8" 1'-3 3/8" 35° 3'-2 9/16" 1'-6 7/8" 2'-1" 1'-7 7/8" 1'-1 3/4" 4'-8 1/8" 6'-3 1/8" 6'-4 7/8" 2'-7 5/8" 2'-11 5/8" 5'-2 3/8" 7'-7 1/4" basic setup dimensions front view 6'-4 13/16".
Page 9: Basic Setup Dimensions
2'- 3/8" 2'-2 3/4" 3'-2 5/8" 1'-1 7/8" 2'-11" 6'-1" 1'-5" 3'-3 1/8" 38.4° 1'-5 3/8" 5'-2 3/8" 7'-7 1/4" basic setup dimensions right side view 6'-4 13/16".
Page 10: Basic Setup Dimensions
5 7/8" 7 1/2" 38° 24 3/8" 35" 62 3/8" 19 1/8" 21 3/4" 91 1/4" 48 1/8" 26 3/8" basic setup dimensions left side view.
Page 11: Parts Identification
Parts identification wood components (not to scale) e1 - left front upright - w4l06667 1 3/8"x3 3/8"x62 3/8" (36x86x1584) (1) e2 - right front upright - w4l06666 1 3/8"x3 3/8"x62 3/8" (36x86x1584) (1) e3 - right rear upright - w4l06648 1 3/8"x3 3/8"x62 3/8" (36x86x1584) (1) e4 - left rear upright - ...
Page 12: Parts Identification
Parts identification wood components (not to scale) h6 - floor rail - w4l06654 1"x3 3/8"x16 3/8" (24x86x416) (1) h7 - floor rail - w4l06655 1"x3 3/8"x19" (24x86x482) (1) h8 - stair hand rail - w4l06663 1"x3 3/8"x54" (24x86x1372) (1) h14 - stair hand rail - w4l06679 1"x3 3/8"x47 3/8" (24x86x1204) (1)...
Page 13: Parts Identification
Parts identification wood components (not to scale) k4 - ground board - w4l06650 5/8"x5 1/4"x73 7/8" (16x134x1876) (1) k5 - ground board - w4l06652 5/8"x5 1/4"x55" (16x134x1397) (1) k6 - stair board - w4l06674 5/8"x5 1/4"x16 7/8" (16x134x430) (4) l1 - floor board - w4l06400 5/8"x4 3/8"x52" (16x112x1...
Page 14: Parts Identification
Parts identification wood components (not to scale) m2 - wall rail - w4l06393 5/8"x3 3/8"x17 1/2" (16x86x445) (2) m3 - wall rail - w4l06394 5/8"x3 3/8"x54 7/8" (16x86x1394) (1) m4 - floor board - w4l06401 5/8"x3 3/8"x56 3/4" (16x86x1442) (9) m5 - floor board - w4l06402 5/8"x3 3/8"x54 3/8" (16x86x138...
Page 15: Parts Identification
Parts identification wood components (not to scale) m16 - wall rail - w4l06653 5/8"x3 3/8"x16 3/8" (16x86x416) (2) m73 - rear support - w4l06608 5/8"x3 3/8"x19 1/4" (16x86x488) (1) m110 - attachment board - w4l06610 5/8"x3 3/8"x19 1/4" (16x86x488) (1) n1 - tie strap - w4l05043 5/8”x2”x3 1/8” (16x50x...
Page 16: Parts Identification
Parts identification wood components (not to scale) (1) wp1 - front right corner panel - w2a01911 (1) wp2 - rear right corner panel - w2a01914 (1) wp3 - front left corner panel - w2a01917 (1) wp4 - rear left corner panel - w2a01920 (1) wp5 - rear center panel - w2a01922 (1) wp6 - left center panel -...
Page 17: Parts Identification
Parts identification wood components (not to scale) (2) wp8 - header assembly - w2a01926 (2) sr1 - stair stringer assembly - w2a01940 (2) rp1 - lower roof panel - w2a01929 (2) rp2 - upper roof panel - w2a01930 (1) dp2 - left door assembly - w2a01928 (1) dp1 - right door assembly - w2a01927.
Page 18: Parts Identification
Parts identification hardware - bolt wh 1/4x1 blk - h100171 (9) vy - bolt wh 5/16x2-1/4 blk - h100205 (8) - bolt wh 5/16x1 3/4 blk - h100378 (7) - bolt wh 5/16x1/2 blk - h100396 (6) - bolt wh 1/4x1/2 blk - h100401 (4) - bolt wh 5/16x1 1/2 blk - h100407 (2) - bolt wh 5/16x1 1/4 blk - h100459 (4) - bo...
Page 19: Parts Identification
Parts identification hardware bc - screw pwh 8x3/4 - h100070 (9) bn - screw pfh 8x1 - h100085 (22) bp - screw pfh 8x1 1/2 - h100086 (99) bq - screw pfh 8x1 1/4 - h100087 (142) br - screw pfh 8x1 1/8 - h100088 (160) bs - screw pfh 8x1 3/4 - h100089 (11) bt - screw pfh 8x2 1/2 - h100090 (17) bv - scre...
Page 20: Parts Identification
Parts identification accessories (not to scale) ea - hand grip yellow plastic - a100043 (2) sq - "a" revision tag - a100314 (1) - 90° l-bracket - blk - a4m00555 (12) (2) - saloon door hinge kit - a4m00642 vb - plastic sunburst - a100361 (2) - ground stake rebar - a4m00527 (4) - byd id tag (medium) a...
Page 21
3 foot ladder assembly step 1 screw pfh 8x2 (6 plcs) h76 h79 h79 - left upright - w4l06611 1"x3 3/8"x38 3/8" (24x86x976) (1) h76 - ladder rung - w4l06609 1"x3 3/8"x18 1/8" (24x86x460) (3) screw pfh 8x2 (6).
Page 22
3 foot ladder assembly step 2 screw pfh 8x2 (6 plcs) h80 screw pfh 8x2 (6) h80 - right upright - w4l06612 1"x3 3/8"x38 3/8" (24x86x976) (1).
Page 23
3 foot ladder assembly step 3 screw pfh 8x2 (4) m73 - rear support - w4l06608 5/8"x3 3/8"x19 1/4" (16x86x488) (1) screw pfh 8x2 (4 plcs) m73 1 1/4.
Page 24
3 foot ladder assembly step 4 m110 - attachment board - w4l06610 5/8"x3 3/8"x19 1/4" (16x86x488) (1) screw pfh 8x2 (4) screw pfh 8x2 (4 plcs) m110 flush.
Page 25
Step 1 note: we recommend that you install all "t-nuts" first, when a "t-nut" is required, throughout the assembly process. Note hole location for proper installation. Bolt wh 5/16x2-1/4 blk (2 plcs) washer lock ext 8x19 blk (2 plcs) bolt wh 5/16x2 blk (4 plcs) washer lock ext 8x19 blk (4 plcs) t-nu...
Page 26
Step 2 washer lock ext 8x19 blk (4) lag screw wh 5/16x1 1/2 blk (4 plcs) washer lock ext 8x19 blk (4 plcs) k1 k4 lag screw wh 5/16x1 1/2 blk (4) k4 - ground board - w4l06650 5/8"x5 1/4"x73 7/8" (16x134x1876) (1) k1 - ground board - w4l06389 5/8"x5 1/4"x54 7/8" (16x134x1394) (1).
Page 27
Step 3 note hole location for proper installation. Washer lock ext 8x19 blk (7) t-nut 5/16 blk (2 plcs) washer lock ext 8x19 blk (2 plcs) bolt wh 5/16x2 blk (2 plcs) bolt wh 5/16x2-3/4 blk (2 plcs) washer lock ext 8x19 blk (2 plcs) t-nut 5/16 blk (2 plcs) washer lock ext 8x19 blk (2 plcs) bolt wh 5/...
Page 28
Step 4 washer lock ext 8x19 blk (2) washer lock ext 8x19 blk (2 plcs) lag screw wh 5/16x1 1/2 blk (2 plcs) lag screw wh 5/16x1 1/2 blk (2).
Page 29
Step 5 note hole location for proper installation. Washer lock ext 8x19 blk (7) t-nut 5/16 blk (1 plc) t-nut 5/16 blk (2 plcs) t-nut 5/16 blk (4 plcs) washer lock ext 8x19 blk (1 plc) bolt wh 5/16x2 blk (1 plc) washer lock ext 8x19 blk (2 plcs) bolt wh 5/16x2-1/4 blk (2 plcs) washer lock ext 8x19 bl...
Page 30
Step 6 washer lock ext 8x19 blk (2) washer lock ext 8x19 blk (2 plcs) lag screw wh 5/16x2 blk (2 plcs) lag screw wh 5/16x2 blk (2).
Page 31
Step 7 nut barrel wh 1/4x5/8 blk (4 plcs) washer lock ext 8x15 blk (4 plcs) bolt wh 1/4x1/2 blk (4 plcs) 90° l-bracket - blk (2 plcs) bolt wh 1/4x1/2 blk (4) nut barrel wh 1/4x5/8 blk (4) washer lock ext 8x15 blk (4) - 90° l-bracket - blk - a4m00555 (2).
Page 32
Step 8 washer lock ext 8x19 blk (6) lag screw wh 5/16x2 blk (6 plcs) washer lock ext 8x19 blk (6 plcs) screw pfh 8x2 1/2 (2 plcs) h1 h7 screw pfh 8x2 1/2 (2) lag screw wh 5/16x2 blk (6) h7 - floor rail - w4l06655 1"x3 3/8"x19" (24x86x482) (1) h1 - floor rail - w4l06391 1"x3 3/8"x56 3/4" (24x86x1442)...
Page 33
Step 9 washer lock ext 8x19 blk (4) screw pfh 8x2 1/2 (2) lag screw wh 5/16x2 blk (4) note hole location for proper installation. Screw pfh 8x2 1/2 (2 plcs) washer lock ext 8x19 blk (4 plcs) lag screw wh 5/16x2 blk (4 plcs) h3 h3 - floor rail - w4l06646 1"x3 3/8"x75 3/4" (24x86x1924) (1).
Page 34
Step 10 washer lock ext 8x19 blk (4) lag screw wh 5/16x2 blk (4) lag screw wh 5/16x2 blk (2 plcs) washer lock ext 8x19 blk (2 plcs) washer lock ext 8x19 blk (2 plcs) lag screw wh 5/16x2 blk (2 plcs) g1 g1 - staircase board - w4l06657 1"x5 1/4"x20 3/8" (24x134x518) (1) note hole location for proper i...
Page 35
Step 11 washer lock ext 8x19 blk (6) t-nut 5/16 blk (6 plcs) bolt wh 5/16x1 3/4 blk (6 plcs) washer lock ext 8x19 blk (6 plcs) washer lock ext 6x15 blk (6 plcs) lag screw wh 1/4x1-1/2 blk (6 plcs) h20 h20 h20 h20 h20 h20 bolt wh 5/16x1 3/4 blk (6) t-nut 5/16 blk (6) lag screw wh 1/4x1-1/2 blk (6) wa...
Page 36
Step 12 screw pfh 8x2 1/4 (6 plcs) j1 j1 flush (typ) right front rear screw pfh 8x2 1/4 (6) j1 - floor support block - w4l06403 1"x2 3/8"x3 3/8" (24x60x86) (3).
Page 37
Step 13 right front screw pfh 8x2 1/2 (8) screw pfh 8x2 1/2 (8 plcs) flush (typ) h5 h5 - floor support - w4l06399 1"x3 3/8"x54 7/8" (24x86x1394) (2).
Page 38
Step 14 right rear screw pfh 8x1 1/2 (69) screw pfh 8x1 1/2 (69 plcs) l2 m12 m13 m14 m5 m4 l1 l2 - floor board - w4l06658 5/8"x4 3/8"x73 3/8" (16x112x1864) (1) l1 - floor board - w4l06400 5/8"x4 3/8"x52" (16x112x1321) (1) m4 - floor board - w4l06401 5/8"x3 3/8"x56 3/4" (16x86x1442) (9) m5 - floor bo...
Page 39
Step 15 washer lock ext 8x19 blk (10) t-nut 5/16 blk (4) right front lag screw wh 5/16x1 1/2 blk (6 plcs) washer lock ext 8x19 blk (6 plcs) t-nut 5/16 blk (4 plcs) washer lock ext 8x19 blk (4 plcs) bolt wh 5/16x2 blk (4 plcs) lag screw wh 5/16x1 1/2 blk (6) m3 m2 m16 m7 m2 - wall rail - w4l06393 5/8...
Page 40
Step 16 washer lock ext 8x19 blk (4) t-nut 5/16 blk (4) front t-nut 1/4 blk (2 plcs) washer lock ext 6x15 blk (2 plcs) bolt wh 1/4x1 blk (2 plcs) hand grip yellow plastic (1 plc) you will assemble (2) sub-assemblies for this step. M6 top bottom t-nut 5/16 blk (4 plcs) washer lock ext 8x19 blk (4 plc...
Page 41
Step 17 washer lock ext 8x19 blk (2) t-nut 5/16 blk (2) screw pfh 8x1 1/8 (4 plcs) note hole location for proper installation. T-nut 5/16 blk (2 plcs) bolt wh 5/16x2 blk (2 plcs) washer lock ext 8x19 blk (2 plcs) s1 m8 m8 screw pfh 8x1 1/8 (4) m8 - wall rail - w4l06409 5/8"x3 3/8"x17 1/4" (16x86x439...
Page 42
Step 18 washer lock ext 8x19 blk (2) right rear screw pfh 8x1 1/8 (4) s1 - rail board - w4l06664 1"x1"x26 3/4" (24x24x679) (1) washer lock ext 8x19 blk (2 plcs) lag screw wh 5/16x1 1/2 blk (2 plcs) screw pfh 8x1 1/8 (4 plcs) lag screw wh 5/16x1 1/2 blk (2) s1 m9 m9 - wall rail - w4l06647 5/8"x3 3/8"...
Page 43
Step 19 right front 2" o1 screw pfh 8x1 1/8 (6 plcs) o1 - picket - w4l06665 5/8"x1 3/8"x20 1/2" (16x34x520) (3) screw pfh 8x1 1/8 (6) 2 1/8"typ (3 spcs).
Page 44
Step 20 right front o1 - picket - w4l06665 5/8"x1 3/8"x20 1/2" (16x34x520) (6) screw pfh 8x1 1/8 (12) 2" typ o1 o1 screw pfh 8x1 1/8 (12 plcs) 2 3/16" typ (3 plcs) 2 3/16" typ (3 plcs).
Page 45
Step 21 right front o1 - picket - w4l06665 5/8"x1 3/8"x20 1/2" (16x34x520) (8) screw pfh 8x1 1/8 (16) 2" o1 screw pfh 8x1 1/8 (16 plcs) 2 1/4" typ (8 spcs).
Page 46
Step 22 right rear o1 - picket - w4l06665 5/8"x1 3/8"x20 1/2" (16x34x520) (2) screw pfh 8x1 1/8 (4) 2" screw pfh 8x1 1/8 (4 plcs) o1 2 5/16" typ (2 spcs).
Page 47
Step 23 front rear o1 - picket - w4l06665 5/8"x1 3/8"x20 1/2" (16x34x520) (9) screw pfh 8x1 1/8 (18) 2 1/8" typ (9 spcs) o1 screw pfh 8x1 1/8 (18 plcs) 1 15/16".
Page 48
Step 24 washer lock ext 8x19 blk (2) t-nut 5/16 blk (3) right front bolt wh 5/16x1 blk (1 plc) bolt wh 5/16x1/2 blk (1 plc) t-nut 5/16 blk (1 plc) washer lock ext 12x19 blk (1 plc) nut barrel wh 5/16x7/8 blk (1 plc) washer lock ext 8x19 blk (2 plcs) bolt wh 5/16x2-3/4 blk (2 plcs) t-nut 5/16 blk (2 ...
Page 49
Step 25 screw pfh 8x1 1/4 (40) right front 1/8" typ gap 5/8" typ overhang y1 screw pfh 8x1 1/4 (40 plcs) y1 - stair board - w4l06669 5/8"x4"x16 7/8" (16x102x430) (10).
Page 50
Step 26 screw pfh 8x1 1/4 (24) right front 1/16 typ gap screw pfh 8x1 1/4 (24 plcs) m15 k6 m15 - stair board - w4l06675 5/8"x3"x16 7/8" (16x75x430) (2) k6 - stair board - w4l06674 5/8"x5 1/4"x16 7/8" (16x134x430) (4).
Page 51
P step 27 screw pfh 8x1 3/4 (1) right front e7 screw pfh 8x1 3/4 (1 plc) w1 h14 t-nut 5/16 blk (1 plc) washer lock ext 8x19 blk (1 plc) bolt wh 5/16x4 1/4 blk (1 plc) previously installed t-nut. Washer lock ext 8x19 blk (1 plc) bolt wh 5/16x3 blk (1 plc) bolt wh 5/16x3 blk (1) bolt wh 5/16x4 1/4 blk...
Page 52
Step 28 front t-nut 5/16 blk (2) washer lock ext 8x19 blk (2) right t-nut 5/16 blk (1 plc) bolt wh 5/16x2-1/4 blk (1 plc) washer lock ext 8x19 blk (1 plc) t-nut 5/16 blk (1 plc) bolt wh 5/16x2-3/4 blk (1 plc) washer lock ext 8x19 blk (1 plc) bolt wh 5/16x2-1/4 blk (1) bolt wh 5/16x2-3/4 blk (1) h8 h...
Page 53
Step 29 front right screw pfh 8x1 1/4 (18) 2 1/4" 2 3/8" typ (9 plcs) 1 1/8" typ screw pfh 8x1 1/4 (18 plcs) o2 o2 - picket - w4l06676 5/8"x1 3/8"x29 1/2" (16x34x750) (9) start here.
Page 54
Step 30 bolt wh 5/16x1 1/2 blk (2 plcs) washer lock ext 8x19 blk (2 plcs) t-nut 5/16 blk (2 plcs) bolt wh 5/16x1 1/2 blk (2) t-nut 5/16 blk (2) washer lock ext 8x19 blk (2) (1) 3 ft ladder assembly.
Page 55
Step 31 stand the (4) corner wall assemblies as shown below. (1) wp1 - front right corner panel - w2a01911 (1) wp2 - rear right corner panel - w2a01914 (1) wp3 - front left corner panel - w2a01917 (1) wp4 - rear left corner panel - w2a01920 front left back right playhouse assembly note the profile o...
Page 56
Step 32 screw pfh 8x1 (10) front left back right (1) wp6 - left center panel - w2a01924 screw pfh 8x1 (10 plcs) wp6 wp3 wp4.
Page 57
Step 33 screw pfh 8x1 (10) front left back right screw pfh 8x1 (10 plcs) wp5 (1) wp5 - rear center panel - w2a01922 wp4 wp2.
Page 58
Step 34 screw pfh 8x2 1/2 (4) front left back right screw pfh 8x2 1/2 (4 plcs) wp8 wp8 (2) wp8 - header assembly - w2a01926 all interior surfaces are flush..
Page 59
Step 35 screw pfh 8x1 1/4 (32) front left back right screw pfh 8x1 1/4 (32 plcs) install with the edge surface of 'n1' flush with the end of wall board, as shown. N1 n1 n1 n1 n1 n1 - tie strap - w4l05043 5/8”x2”x3 1/8” (16x50x80) (8).
Page 60
Step 36 front left back right bolt wh 1/4x1 blk (4 plcs) washer lock ext 6x15 blk (4 plcs) nut barrel wh 1/4x7/8 blk (4 plcs) washer lock ext 8x15 blk (4 plcs) l3 l3 l3 bolt wh 1/4x1 blk (4) nut barrel wh 1/4x7/8 blk (4) washer lock ext 8x15 blk (4) washer lock ext 6x15 blk (4) l3 - gable board - w4...
Page 61
Step 37 front left back right screw pwh 8x3/4 (8 plcs) screw pfh 8x1 1/4 (4 plcs) screw pfh 8x1 1/4 (4) screw pwh 8x3/4 (8) vb - plastic sunburst - a100361 (2) plastic sunburst (2 plcs).
Page 62
Step 38 front left back right screw pfh 8x1 1/2 (8) screw pfh 8x1 1/2 (8 plcs) rp2 rp2 (2) rp2 - upper roof panel - w2a01930
Page 63
Step 39 front left back right screw pfh 8x1 1/2 (8) screw pfh 8x1 1/2 (8 plcs) (2) rp1 - lower roof panel - w2a01929 rp1 rp1.
Page 64
Ad step 40 front left back right screw pfh 8x1 1/4 (2) screw pfh 8x1 1/4 (2 plcs) flush surfaces n3 n3 - left window shelf - w4l06415 5/8"x2 3/8"x19 1/8" (16x60x485) (1).
Page 65
Step 41 front left back right screw pfh 8x1 1/4 (2) screw pfh 8x1 1/4 (2 plcs) n2 flush surfaces n2 - rear window shelf - w4l06414 5/8"x2 3/8"x18 7/8" (16x60x479) (1).
Page 66
Step 42 front left back right screw pwh 8x5/8 blk (8) screw pwh 8x5/8 blk (8 plcs) 90° l-bracket - blk (8 plcs) edges flush in door openings. Align brackets with pilot holes. - 90° l-bracket - blk - a4m00555 (8).
Page 67
Step 43 front left back right screw pfh 8x1-1/2 blk (2) screw pfh 8x1-1/2 blk (2 plcs) q1 q1 - counter top support - w4l06416 1"x4 3/8"x5 7/8" (24x112x150) (1) 5/8" down (16mm).
Page 68
Step 44 front back right screw pfh 8x1 1/4 (2) 1 1/4" 13 3/4" screw pfh 8x1 1/4 (2 plcs) j2 j2 - counter top support - w4l06411 1"x2 3/8"x5 7/8" (24x60x150) (1).
Page 69
Step 45 front back right screw pfh 8x1 1/4 (4) screw pfh 8x1 1/4 (4 plcs) m10 flush m10 - counter top - w4l06413 5/8"x3 3/8"x23 5/8" (16x86x600) (2).
Page 70
Step 46 front left back right screw pwh 8x5/8 (2) screw pwh 8x5/8 (2 plcs) "a" revision tag (1 plc) sq - "a" revision tag - a100314 (1).
Page 71
Step 47 1" faucet location screw pfh 8x1 1/2 (2 plcs) faucet kit (1 plc) screw pfh 8x1 1/2 (2) - faucet kit - a6p00024 (1).
Page 72
Step 48 screw pwh 8x5/8 (2) 3/8" sink basin location screw pwh 8x5/8 (2 plcs) surface mount basin (1 plc) - surface mount basin - a6p00032 (1).
Page 73
Step 49 1 1/8" stove location screw pfh 8x1 1/8 (4 plcs) stove kit (1 plc) screw pfh 8x1 1/8 (4) - stove kit - a6p00025 (1).
Page 74
Step 50 7 5/8" screw pfh 8x1 1/4 (4 plcs) j3 j3 mate end of 'j3' to the edge of plastic hinge. J3 - seat support - w4l06417 1"x2 3/8"x8 3/8" (24x60x214) (2) screw pfh 8x1 1/4 (4).
Page 75
Step 51 front back right screw pfh 8x1 1/4 (6 plcs) l8 n4 assemble bench sub-assembly first. Screw pfh 8x1 1/2 (8 plcs) mate the rear bench board edge to the surface of the wall cleat, as shown. Bench sub-assembly screw pfh 8x1 1/2 (8) screw pfh 8x1 1/4 (6) l8 - seat board - w4l06418 1"x4 3/8"x36 3/...
Page 76
Step 52 front right screw pfh 8x1 1/4 blk (4 plcs) m33 m33 - fascia board - w4l06559 5/8"x3 3/8"x25 5/8" (16x86x652) (2) screw pfh 8x1 1/4 blk (4).
Page 77
Step 53 back right m33 - fascia board - w4l06559 5/8"x3 3/8"x25 5/8" (16x86x652) (2) screw pfh 8x1 1/4 blk (4) screw pfh 8x1 1/4 blk (2 plcs) m33.
Page 78
Step 54 pfh screw (2 plcs) spring (1 plc) top pivot (1 plc) pph screw (2 plcs) ext. Tooth washer (1 plc) plastic guide (1 plc) bottom pivot (2 plcs) (2) - saloon door hinge kit - a4m00642 both the left and right door should be assembled before installation on the playhouse. Top assembled to playhous...
Page 79
Bb step 55 front pfh screw (4 plcs) bottom hinge bracket (2 plcs) note hole location for proper installation..
Page 80
Step 56 top hinge (1 plc) pph screw (2 plcs) place the top hinge over the post and compress the spring until the holes in the top hinge and the holes in the panel align. Secure with pph screws, as shown..
Page 81
Step 57 place the top hinge over the post and compress the spring until the holes in the top hinge and the holes in the panel align. Secure with pph screws, as shown. Pph screw (2 plcs) top hinge (1 plc).
Page 82
Step 58 (1) playhouse assembly screw pwh 8x1/2 blk (8 plcs) screw pwh 8x1/2 blk (8) screw pfh 8x1 3/4 (8 plcs) screw pfh 8x1 3/4 (8).
Page 83
Step 59 bo tt o m screw pfh 8x1 1/8 (10 plcs) l5 l6 l5 l4 l4 l4 - bottom board - w4l06420 5/8"x4 3/8"x15" (16x112x380) (2) l5 - long side board - w4l06421 5/8"x4 3/8"x15" (16x112x380) (2) l6 - short side board - w4l06422 5/8"x4 3/8"x7 1/2" (16x112x192) (2) screw pfh 8x1 1/8 (10).
Page 84
Step 60 screw pfh 8x1 1/8 (16 plcs) s2 s2 s2 s2 - corner board - w4l06424 1"x1"x8 7/8" (24x24x224) (4) screw pfh 8x1 1/8 (16).
Page 85
Step 61 l5 - long side board - w4l06421 5/8"x4 3/8"x15" (16x112x380) (1) l6 - short side board - w4l06422 5/8"x4 3/8"x7 1/2" (16x112x192) (2) l6 l5 l6 l7 l7 - arched side board - w4l06423 5/8"x4 3/8"x15" (16x112x380) (1) screw pfh 8x1 1/8 (16 plcs) repeat steps 59 through 61 to build the second toy ...
Page 86
Step 62 (2) toy box assembly toy box assembly (2 plcs).
Page 87
E step 63 seat cushion (1 plc) - seat cushion - a6p00107 (1).
Page 88
Step 64 11 9/16" screw pwh 8x5/8 blk (2 plcs) byd id tag (medium) ages 2 to 10 (1 plcs) - byd id tag (medium) ages 2 to 10 - a4m00528 (1) screw pwh 8x5/8 blk (2).
Page 89
Step 65 screw pfh 8x1 1/8 (4) screw pfh 8x1 1/8 (4 plcs) m1 - growth board - w4l06690 5/8"x3 3/8"x60 1/4" (16x86x1530) (1) m1 2 7/8".
Page 90
Step 66 nut barrel wh 5/16x5/8 blk (2 plcs) washer lock ext 12x19 blk (2 plcs) bolt wh 5/16x1/2 blk (2 plcs) ground stake rebar (2 plcs) 1 3/4" 7 7/8" 39 1/4" drilling locations drill through 'k5' board using a 7/16" drill bit. K5 washer lock ext 12x19 blk (2) bolt wh 5/16x1/2 blk (2) - ground stake...
Page 91
Step 67 drilling locations drill through 'k5' board using a 7/16" drill bit. Washer lock ext 12x19 blk (2) bolt wh 5/16x1/2 blk (2) - ground stake rebar - a4m00527 (2) nut barrel wh 5/16x5/8 blk (2 plcs) washer lock ext 12x19 blk (2 plcs) ground stake rebar (2 plcs) bolt wh 5/16x1/2 blk (2 plcs) 1 3...
Page 92: Warranty
Warranty australian consumer law many of our products come with a guarantee or warranty from the manufacturer. In addition, they come with guarantees that cannot be excluded under the australian consumer law. You are entitled to a replacement or refund for a major failure and compensation for any ot...