1. DL manuals
  2. Backyard Discovery
  3. Play Sets & Playground Equipment
  4. 1801080
  5. Owner's Manual

Backyard Discovery 1801080 Owner's Manual

Manual is about: WOODEN SWING SET

Summary of 1801080

  • Page 1

    Backyard discovery 3305 airport drive pittsburg, ks 66762 1-800-856-4445 made in china features the fastening system. Register your new swing set on-line @ www.Backyarddiscovery.Com (you will also find any updates on assembly instructions and information to order replacement parts) save this assembl...

  • Page 2: Stop

    Please have the following information when you make your call: 1 – model number of the product located on the front of the assembly manual 2 – desription of the part from the parts list por favor tenga visible la siguiente informaciÓn cuando llame: 1 - nÚmero de modelo del producto que se encuentra ...

  • Page 3

    Owner’s manual play set rev01/27/17 or dear customer: please read entire booklet completely before beginning the assembly process. Equipment is recommended for use by children 3 to 10 years of age . Structures are not intended for public use. The company does not warranty any of its residential stru...

  • Page 4

    Owner’s manual play set rev01/27/17 please refer to the assembly section of the assembly manual for maximum fall height . Positioning your playcenter 1. The play center is designed to be installed on a level surface by an adult with an adult helper . Place in a flat area of your yard to minimize gro...

  • Page 5

    Owner’s manual play set rev01/27/17 the following chart explains the fall height in feet from which a life threatening head injury would not be expected critical heights in feet (m) of tested materials material uncompressed depth compressed depth 6" (152mm) 9" (228mm) 12" (304mm) to 9" (228mm) wood ...

  • Page 6

    Owner’s manual play set rev01/27/17 18. Verify that any suspended climbing ropes, chain, or cable are secured at both ends and that they cannot be looped back on it. 19. Instruct children not to attach items to the playground equipment that are not specifically designed for use with the equipment, s...

  • Page 7

    Owner’s manual play set rev01/27/17 additional maintenance: • check the swing beam and hardware every two weeks due to wood expansion and contraction. It is particularly important that this procedure be followed at the beginning of each season. • inspect wood parts monthly. The grain of the wood som...

  • Page 8

    Owner’s manual play set rev01/27/17 appendix a information on playground surfacing materials: the following information is from the united states consumer product safety commission’s information sheet for playground surfacing material; also see the following website for additional information: www.C...

  • Page 9

    Owner’s manual play set rev01/27/17 11this information has been extracted from the cpsc publications “playground surfacing — technical information guide” and “handbook for public playground safety.” copies of these reports can be obtained by sending a postcard to: office of public affairs, u.S. Cons...

  • Page 10

    For more information and frequently asked questions, please refer to our website at www.Backyarddiscovery.Com. Play set assembly manual faqs: 1. Does the area for the playset need to be level? Yes. Backyard discovery recommends the playset be positioned on a flat level area for maximum safety and du...

  • Page 11

    Tools required for installation: (these are the tools that are generally required for assembly of our outdoor products. These tools are not included with the outdoor product purchase.) (level 24") (square) (phillips screw driver) (tape measure) (claw hammer) (rubber mallet - optional) (drill attachm...

  • Page 12: Basic Setup Dimensions

    Basic setup dimensions place the set on level ground, not less than 6 ft [2 m] from any structure or obstruction such as a fence, garage, house, overhanging branches, laundry lines, or electrical wires. Safe play zone general information: your set has been designed and engineered for children only a...

  • Page 13: Parts Identification

    Parts identification wood components (not to scale) b3 - post - w4l11178 3"x3"x70 3/8" (76x76x1786) (1) b4 - post - w4l11179 3"x3"x70 3/8" (76x76x1786) (1) b5 - post - w4l11180 3"x3"x59" (76x76x1500) (1) e4 - upright - w4l11181 1 3/8"x3 3/8"x70 3/8" (36x86x1786) (1) e5 - upright - w4l11182 1 3/8"x3 ...

  • Page 14: Parts Identification

    Parts identification wood components (not to scale) f5 - brace - w4l11187 1 3/8"x2 3/8"x18 1/8" (36x60x460) (3) g6 - floor joist - w4l11188 1"x5 1/4"x49 1/2" (24x134x1256) (1) h4 - floor support - w4l11190 1"x3 3/8"x74 3/8" (24x86x1890) (1) f4 - upright - w4l09063 1 3/8"x2 3/8"x23 1/8" (36x60x586) (...

  • Page 15: Parts Identification

    Parts identification wood components (not to scale) h11 - roof rafter - w4l11192 1"x3 3/8"x43 7/8" (24x86x1114) (4) h14 - floor support - w4l11193 1"x3 3/8"x35 3/8" (24x86x898) (1) h15 - floor joist - w4l11194 1"x3 3/8"x35 3/8" (24x86x898) (3) h8 - floor support - w4l09064 1"x3 3/8"x53" (24x86x1346)...

  • Page 16: Parts Identification

    Parts identification wood components (not to scale) j1 - porch rafter - w4l11197 1"x2 3/8"x38 1/8" (24x60x969) (2) k1 - double arched rail - w4l09079 5/8"x5 1/4"x90 1/8" (16x134x2288) (1) k2 - wall rail - w4l09060 5/8"x5 1/4"x55 5/8" (16x134x1414) (1) k3 - arched rail - w4l09047 5/8"x5 1/4"x55 5/8" ...

  • Page 17: Parts Identification

    Parts identification wood components (not to scale) k14 - wall rail - w4l09068 5/8"x5 1/4"x11 5/8" (16x134x294) (1) k15 - wall rail - w4l09067 5/8"x5 1/4"x11 5/8" (16x134x294) (1) k16 - safety rail - w4l11199 5/8"x5 1/4"x16 7/8" (16x134x430) (1) k91 - gable board - w4l11200 3/8"x3 3/8"x49 5/8" (11x8...

  • Page 18: Parts Identification

    Parts identification wood components (not to scale) l5 - wall board - w4l11212 5/8"x4 3/8"x36" (16x112x914) (2) l6 - corner board - w4l11111 5/8"x4 3/8"x31" (16x112x788) (1) l7 - corner board - w4l11213 5/8"x4 3/8"x31" (16x112x788) (1) l8 - corner board - w4l11214 5/8"x4 3/8"x31" (16x112x788) (1) l9...

  • Page 19: Parts Identification

    Parts identification wood components (not to scale) m10 - wall board - w4l11223 5/8"x3 3/8"x41 1/8" (16x86x1044) (2) m11 - wall rail - w4l09055 5/8"x3 3/8"x39 7/8" (16x86x1012) (1) m12 - wall board - w4l11224 5/8"x3 3/8"x36" (16x86x914) (6) m13 - wall board - w4l11225 5/8"x3 3/8"x36" (16x86x914) (20...

  • Page 20: Parts Identification

    Parts identification wood components (not to scale) m27 - wall rail - w4l09083 5/8"x3 3/8"x10 3/4" (16x86x274) (1) m28 - cleat - w4l11232 5/8"x3 3/8"x5 1/4" (16x86x132) (2) m47 - picket - 51 - w4l11233 5/8"x3 3/8"x25 1/4" (16x86x640) (6) m49 - picket - 53 - w4l11234 5/8"x3 3/8"x20 3/8" (16x86x518) (...

  • Page 21: Parts Identification

    Parts identification wood components (not to scale) y1 - floor board - w4l11239 5/8"x4"x45 1/8" (16x102x1146) (1) (2) rp1 - peak roof panel - w2a02287 1 5/8"x15 5/8"x60 7/8" (42x396x1546) (3) rp2 - roof panel - w2a02288 1 5/8"x15 5/8"x60 7/8" (42x396x1546) (1) rp3 - porch panel - w2a02289 1 5/8"x20 ...

  • Page 22: Parts Identification

    Parts identification hardware - washer lock int 10x18 sd - h100708 (13) - washer lock int 8x15 sd - h100710 (24) - washer lock ext 8x19 sd - h100554 (197) - washer lock ext 12x19 sd - h100707 (24) - bolt wh 5/16x1/2 sd - h100675 (13) - washer flat 11x25 sd - h100703 (13) - bolt wh 5/16x4 1/2 sd - h1...

  • Page 23: Parts Identification

    Parts identification hardware - lag screw wh 5/16x3 sd - h100689 (22) - t-40 torx bit - a100042 (2) - t-30 torx wrench - h100114 (2) - t-40 torx wrench - a100041 (2) - lag screw wh 5/16x2 1/2 sd - h100687 (3) - lag screw wh 5/16x2 sd - h100686 (49) - lag screw wh 5/16x1 1/2 sd - h100685 (11) - screw...

  • Page 24: Parts Identification

    Parts identification accessories (not to scale) hp - mesh panel - a100012 (1) ef - chain green 57" - a100047 (4) kn - chain green 31" - a100177 (2) jv - hand grip green 816 c/c - a100134 (2) fx - hand grip metal green 381 c/c - a100118 (4) hc - byd id tag (large) 2011 with ages - a100164 (1) sq - "a...

  • Page 25

    5 foot ladder assembly step 1 screw pfh 8x2 sd (10 plcs) h76 e77 h77 - left upright - w4l06606 1"x3 3/8"x64 3/8" (24x86x1634) (1) h76 - ladder rung - w4l06609 1"x3 3/8"x18 1/8" (24x86x460) (5) screw pfh 8x2 sd (10).

  • Page 26

    5 foot ladder assembly step 2 screw pfh 8x2 sd (10 plcs) e78 screw pfh 8x2 sd (10) h78 - right upright - w4l06607 1"x3 3/8"x64 3/8" (24x86x1634) (1).

  • Page 27

    5 foot ladder assembly step 3 screw pfh 8x2 sd (8 plcs) screw pfh 8x2 sd (8) m110 m73 m73 - rear support - w4l06608 5/8"x3 3/8"x19 1/4" (16x86x488) (1) m110 - attachment board - w4l06610 5/8"x3 3/8"x19 1/4" (16x86x488) (1).

  • Page 28

    5 foot ladder assembly step 4 jv - hand grip green 816 c/c - a100134 (2) jv t-nut 5/16 sd (4 plcs) bolt wh 5/16x3 1/2 sd (4 plcs) bolt wh 5/16x3 1/2 sd (4) t-nut 5/16 sd (4).

  • Page 29

    Step 1 bolt wh 5/16x2 1/4 sd (5) bolt wh 5/16x2 sd (1) lag screw wh 5/16x2 sd (2) t-nut 5/16 sd (13) washer lock ext 8x19 sd (15) bolt wh 5/16x3 3/4 sd (7) washer lock ext 8x19 sd (6 plcs) bolt wh 5/16x2 1/4 sd (3 plcs) bolt wh 5/16x3 3/4 sd (3 plcs) t-nut 5/16 sd (6 plcs) t-nut 5/16 sd (1 plc) lag ...

  • Page 30

    Step 2 g1 - ground board - w4l09084 1"x5 1/4"x90 1/8" (24x134x2288) (1) h5 - floor support - w4l09073 1"x3 3/8"x53 3/4" (24x86x1366) (1) b5 k1 h5 e4 b3 g1 bolt wh 5/16x2 1/4 sd (1 plc) washer lock ext 8x19 sd (2 plcs) t-nut 5/16 sd (2 plcs) bolt wh 5/16x3 3/4 sd (1 plc) t-nut 5/16 sd (5 plcs) bolt w...

  • Page 31

    Step 3 lag screw wh 5/16x2 sd (8) washer lock ext 8x19 sd (10) m8 - wall rail - w4l09085 5/8"x3 3/8"x51 3/4" (16x86x1314) (2) g4 - ground board - w4l09086 1"x5 1/4"x78 1/4" (24x134x1987) (1) m8 h21 m8 g4 h21 - angle brace - w4l11112 1"x3 3/8"x47 1/4" (24x86x1201) (1) flush washer lock ext 8x19 sd (8...

  • Page 32

    Step 4 t-nut 5/16 sd (6) bolt wh 5/16x3 3/4 sd (4) lag screw wh 5/16x2 sd (6) washer lock ext 8x19 sd (12) m8 - wall rail - w4l09085 5/8"x3 3/8"x51 3/4" (16x86x1314) (1) g3 - ground board - w4l09087 1"x5 1/4"x78 1/4" (24x134x1987) (1) h2 - floor support - w4l09066 1"x3 3/8"x75 3/8" (24x86x1914) (1) ...

  • Page 33

    Step 5 lag screw wh 5/16x2 sd (4) washer lock ext 8x19 sd (4) screw pfh 8x2 1/2 sd (4) g6 - floor joist - w4l11188 1"x5 1/4"x49 1/2" (24x134x1256) (1) g5 - ground board - w4l09089 1"x5 1/4"x51 1/8" (24x134x1298) (1) washer lock ext 8x19 sd (4 plcs) lag screw wh 5/16x2 sd (4 plcs) screw pfh 8x2 1/2 s...

  • Page 34

    Step 6 screw pfh 8x1 1/2 sd (75 plcs) screw pfh 8x1 1/2 sd (75) y1 - floor board - w4l11239 5/8"x4"x45 1/8" (16x102x1146) (1) m5 - floor board - w4l11220 5/8"x3 3/8"x53" (16x86x1346) (14) m5 14 plcs y1.

  • Page 35

    Step 7 lag screw wh 5/16x2 sd (2) washer lock ext 8x19 sd (2) washer lock ext 8x19 sd (2 plcs) lag screw wh 5/16x2 sd (2 plcs) screw pwh 8x5/8 sd (2 plcs) "a" revision tag (1 plc) h4 - floor support - w4l11190 1"x3 3/8"x74 3/8" (24x86x1890) (1) screw pwh 8x5/8 sd (2) sq - "a" revision tag - a100314 ...

  • Page 36

    Step 8 t-nut 5/16 sd (2) bolt wh 5/16x3 3/4 sd (2) washer lock ext 8x19 sd (2) t-nut 5/16 sd (2 plcs) washer lock ext 8x19 sd (2 plcs) bolt wh 5/16x3 3/4 sd (2 plcs) bolt wh 5/16x1/2 sd (2 plcs) washer lock ext 12x19 sd (2 plcs) l bracket 2.5x38x50x55 (1 plc) nut barrel wh 5/16x7/8 sd (2 plcs) washe...

  • Page 37

    Step 9 t-nut 5/16 sd (5) bolt wh 5/16x2 1/4 sd (2) bolt wh 5/16x3 3/4 sd (3) washer lock ext 8x19 sd (5) bolt wh 5/16x2 1/4 sd (2 plcs) bolt wh 5/16x3 3/4 sd (3 plcs) washer lock ext 8x19 sd (5 plcs) t-nut 5/16 sd (5 plcs) h1 - floor support - w4l09076 1"x3 3/8"x90 1/8" (24x86x2288) (1) h3 - floor s...

  • Page 38

    Step 10 t-nut 5/16 sd (3) washer lock ext 8x19 sd (3) bolt wh 5/16x4 1/2 sd (3) l12 - corner board - w4l11218 5/8"x4 3/8"x41 1/2" (16x112x1055) (1) l7 - corner board - w4l11213 5/8"x4 3/8"x31" (16x112x788) (1) t-nut 5/16 sd (3 plcs) washer lock ext 8x19 sd (3 plcs) bolt wh 5/16x4 1/2 sd (3 plcs) not...

  • Page 39

    Step 11 washer lock ext 12x19 sd (6) nut barrel wh 5/16x7/8 sd (6) bolt wh 5/16x1/2 sd (1) tz - l bracket 2.5x38x50x55 - a100340 (3) l9 - corner board - w4l11215 5/8"x4 3/8"x31" (16x112x788) (2) l6 - corner board - w4l11111 5/8"x4 3/8"x31" (16x112x788) (1) e1 - floor support - w4l09077 1 3/8"x3 3/8"...

  • Page 40

    Step 12 screw pfh 8x2 1/2 sd (16) h15 - floor joist - w4l11194 1"x3 3/8"x35 3/8" (24x86x898) (3) screw pfh 8x2 1/2 sd (16 plcs) h15 h24 h24 - floor joist - w4l11451 1"x3 3/8"x53 3/4" (24x86x1366) (1).

  • Page 41

    Step 13 t-nut 5/16 sd (5) bolt wh 5/16x2 1/4 sd (5) lag screw wh 5/16x2 sd (5) washer lock ext 8x19 sd (10) f5 - brace - w4l11187 1 3/8"x2 3/8"x18 1/8" (36x60x460) (3) bolt wh 5/16x2 1/4 sd (5 plcs) t-nut 5/16 sd (5 plcs) lag screw wh 5/16x2 sd (5 plcs) washer lock ext 8x19 sd (10 plcs) f5 3 plcs 2 ...

  • Page 42

    Step 14 screw pfh 8x1 1/2 sd (77) m4 - floor board - w4l11219 5/8"x3 3/8"x76 3/4" (16x86x1950) (11) screw pfh 8x1 1/2 sd (77 plcs) m4 11 plcs.

  • Page 43

    Step 15 screw pfh 8x1 1/2 sd (80) m18 - floor board - w4l11228 5/8"x3 3/8"x24 3/4" (16x86x628) (16) screw pfh 8x1 1/2 sd (80 plcs) m18 16 plcs.

  • Page 44

    Step 16 t-nut 5/16 sd (2) washer lock ext 8x19 sd (2) screw pfh 8x2 1/2 sd (8) bolt wh 5/16x4-1/4 sd (2) h9 - floor support - w4l09072 1"x3 3/8"x53" (24x86x1346) (1) h6 - floor joist - w4l11191 1"x3 3/8"x53 3/4" (24x86x1366) (2) screw pfh 8x2 1/2 sd (8 plcs) bolt wh 5/16x4-1/4 sd (2 plcs) washer loc...

  • Page 45

    Step 17 screw pfh 8x1 1/2 sd (96) m6 - floor board - w4l11221 5/8"x3 3/8"x53" (16x86x1346) (16) screw pfh 8x1 1/2 sd (96 plcs) m6 16 plcs.

  • Page 46

    Step 18 t-nut 5/16 sd (1) bolt wh 5/16x2 sd (1) lag screw wh 5/16x2 sd (4) washer lock ext 8x19 sd (5) m8 - wall rail - w4l09085 5/8"x3 3/8"x51 3/4" (16x86x1314) (1) m2 - wall rail - w4l09088 5/8"x3 3/8"x90 1/8" (16x86x2288) (1) flush m8 m2 lag screw wh 5/16x2 sd (4 plcs) washer lock ext 8x19 sd (5 ...

  • Page 47

    Step 19 t-nut 5/16 sd (2) bolt wh 5/16x2 sd (1) washer lock ext 8x19 sd (2) bolt wh 5/16x3 1/2 sd (1) screw pfh 8x1 1/8 sd (16) m10 - wall board - w4l11223 5/8"x3 3/8"x41 1/8" (16x86x1044) (2) l4 - wall board - w4l11211 5/8"x4 3/8"x41 1/8" (16x112x1044) (2) m26 - wall rail - w4l09082 5/8"x3 3/8"x11 ...

  • Page 48

    Step 20 screw pfh 8x1 1/8 sd (24) l2 - wall board - w4l11209 5/8"x4 3/8"x45 1/8" (16x112x1146) (2) m9 - wall board - w4l11222 5/8"x3 3/8"x45 1/8" (16x86x1146) (2) l3 - corner board - w4l11210 5/8"x4 3/8"x41 1/2" (16x112x1055) (4) l10 m9 l2 l2 m9 l10 screw pfh 8x1 1/8 sd (24 plcs).

  • Page 49

    Step 21 screw pfh 8x1 1/8 sd (16) n4 - window trim - w4l09080 5/8"x2 3/8"x19 7/8" (16x60x504) (2) n3 - window trim - w4l09081 5/8"x2 3/8"x22 1/2" (16x60x570) (1) n3 n4 n4 n3 screw pfh 8x1 1/8 sd (16 plcs).

  • Page 50

    Step 22 screw pfh 8x1 1/8 sd (56) m49 - picket - 53 - w4l11234 5/8"x3 3/8"x20 3/8" (16x86x518) (14) 1 13/16" 2 11/16" typical spacing m49 14 plcs screw pfh 8x1 1/8 sd (56 plcs).

  • Page 51

    Step 23 screw pfh 8x1 1/8 sd (28) m49 - picket - 53 - w4l11234 5/8"x3 3/8"x20 3/8" (16x86x518) (7) 3" typical spacing 1 13/16" m49 7 plcs screw pfh 8x1 1/8 sd (28 plcs) 17 13/16" 19 7/16" 1 5/16" 6 7/8" screw pfh 8x1 1/4 sd (2 plcs) h19 h19 h19 - support board - w4l11196 1"x3 3/8"x5 1/4" (24x86x132)...

  • Page 52

    Step 24 screw pfh 8x1 1/8 sd (20) m49 - picket - 53 - w4l11234 5/8"x3 3/8"x20 3/8" (16x86x518) (5) 2 3/4" typical spacing 1 13/16" screw pfh 8x1 1/8 sd (20 plcs) m49 5 plcs.

  • Page 53

    M step 25 t-nut 5/16 sd (8) washer lock ext 8x19 sd (8) bolt wh 5/16x4 1/2 sd (1) bolt wh 5/16x1 1/2 sd (6) bolt wh 5/16x3 sd (1) k13 - wall rail - w4l09071 5/8"x5 1/4"x14 1/8" (16x134x360) (2) k14 - wall rail - w4l09068 5/8"x5 1/4"x11 5/8" (16x134x294) (1) k15 - wall rail - w4l09067 5/8"x5 1/4"x11 ...

  • Page 54

    Step 26 t-nut 5/16 sd (4) washer lock ext 8x19 sd (4) bolt wh 5/16x4 1/2 sd (1) bolt wh 5/16x1 1/2 sd (2) bolt wh 5/16x3 sd (1) k5 - wall rail - w4l09061 5/8"x5 1/4"x54 1/4" (16x134x1378) (1) k2 - wall rail - w4l09060 5/8"x5 1/4"x55 5/8" (16x134x1414) (1) k2 k5 t-nut 5/16 sd typical installation (4 ...

  • Page 55

    Step 27 t-nut 5/16 sd (4) bolt wh 5/16x2 sd (4) lag screw wh 5/16x2 sd (4) washer lock ext 8x19 sd (8) e7 - upright - w4l11184 1 3/8"x3 3/8"x41" (36x86x1040) (2) e6 - upright - w4l11183 1 3/8"x3 3/8"x41" (36x86x1040) (2) e7 e7 e6 bolt wh 5/16x2 sd (4 plcs) washer lock ext 8x19 sd (8 plcs) lag screw ...

  • Page 56

    Step 28 t-nut 5/16 sd (8) bolt wh 5/16x2 sd (8) lag screw wh 5/16x2 sd (4) washer lock ext 8x19 sd (10) tz - l bracket 2.5x38x50x55 - a100340 (2) k6 - arched rail - w4l09046 5/8"x5 1/4"x54 1/4" (16x134x1378) (1) k3 - arched rail - w4l09047 5/8"x5 1/4"x55 5/8" (16x134x1414) (1) k7 - arched rail - w4l...

  • Page 57

    Step 29 screw pfh 8x1 1/8 sd (42) m12 - wall board - w4l11224 5/8"x3 3/8"x36" (16x86x914) (6) l5 - wall board - w4l11212 5/8"x4 3/8"x36" (16x112x914) (2) m25 - wall board - w4l11231 5/8"x3 3/8"x14 1/4" (16x86x362) (5) 1 1/4" m12 l5 m12 m25 5 plcs screw pfh 8x1 1/8 sd (42 plcs).

  • Page 58

    Step 30 t-nut 5/16 sd (4) bolt wh 5/16x2 1/4 sd (2) washer lock ext 8x19 sd (2) tz - l bracket 2.5x38x50x55 - a100340 (2) screw pfh 8x1 1/8 sd (13) bolt wh 5/16x1 1/2 sd (2) h10 - support board - w4l09062 1"x3 3/8"x53" (24x86x1346) (1) flush l bracket 2.5x38x50x55 (2 plcs) drill 3/8" (10mm) hole thr...

  • Page 59

    Step 31 screw pfh 8x1 1/8 sd (24) m13 - wall board - w4l11225 5/8"x3 3/8"x36" (16x86x914) (6) 1 1/4" m13 6 plcs screw pfh 8x1 1/8 sd (24 plcs).

  • Page 60

    Step 32 screw pfh 8x1 1/8 sd (46) m49 - picket - 53 - w4l11234 5/8"x3 3/8"x20 3/8" (16x86x518) (6) m13 - wall board - w4l11225 5/8"x3 3/8"x36" (16x86x914) (8) l11 - wall board - w4l11217 5/8"x4 3/8"x20 3/8" (16x112x518) (1) screw pfh 8x1 1/8 sd (46 plcs) m13 m49 6 plcs l11 m13 1 1/4".

  • Page 61

    Step 33 screw pfh 8x1 1/8 sd (20) note: drill 3/16" (5mm) holes where indicated. N5 - window trim - w4l09058 5/8"x2 3/8"x14" (16x60x356) (2) n2 - window trim - w4l09059 5/8"x2 3/8"x30" (16x60x761) (1) 3 11/16" 7 9/16" 4 13/16" 1 3/16" 1 3/16" n2 n5 n5 n5 n2 screw pfh 8x1 1/8 sd (20 plcs).

  • Page 62

    Step 34 screw pfh 8x1 1/8 sd (24) m13 - wall board - w4l11225 5/8"x3 3/8"x36" (16x86x914) (6) 1 1/4" screw pfh 8x1 1/8 sd (24 plcs) m13 6 plcs.

  • Page 63

    Step 35 t-nut 5/16 sd (2) washer lock ext 8x19 sd (1) screw pfh 8x2 1/2 sd (2) washer lock ext 12x19 sd (2) nut barrel wh 5/16x7/8 sd (2) bolt wh 5/16x1/2 sd (2) tz - l bracket 2.5x38x50x55 - a100340 (2) bolt wh 5/16x1 1/2 sd (1) h17 - wall rail - w4l09052 1"x3 3/8"x23 3/4" (24x86x604) (1) h16 - wal...

  • Page 64

    Step 36 screw pfh 8x1 1/8 sd (12) m49 - picket - 53 - w4l11234 5/8"x3 3/8"x20 3/8" (16x86x518) (3) 2 7/16" typical spacing 1 13/16" screw pfh 8x1 1/8 sd (12 plcs) m49 3 plcs.

  • Page 65

    Step 37 t-nut 5/16 sd (9) bolt wh 5/16x2 sd (4) washer lock ext 8x19 sd (9) bolt wh 5/16x1 1/4 sd (5) h20 - wall rail - w4l09051 1"x3 3/8"x92" (24x86x2336) (1) m7 - wall rail - w4l09054 5/8"x3 3/8"x63 1/4" (16x86x1608) (1) m15 - wall board - w4l11227 5/8"x3 3/8"x31" (16x86x788) (1) m14 - wall board ...

  • Page 66

    Step 38 screw pfh 8x1 1/8 sd (32) m49 - picket - 53 - w4l11234 5/8"x3 3/8"x20 3/8" (16x86x518) (8) m49 8 plcs screw pfh 8x1 1/8 sd (32 plcs) 1 13/16" 2 1/2" typical spacing.

  • Page 67

    Step 39 t-nut 5/16 sd (2) washer lock ext 8x19 sd (1) screw pfh 8x1 1/2 sd (2) washer lock ext 12x19 sd (2) nut barrel wh 5/16x7/8 sd (2) bolt wh 5/16x1/2 sd (1) bolt wh 5/16x1 1/4 sd (2) bolt wh 5/16x1 1/2 sd (1) h13 - wall rail - w4l09049 1"x3 3/8"x36 1/4" (24x86x922) (1) h12 - wall rail - w4l0905...

  • Page 68

    Step 40 screw pfh 8x1 1/8 sd (20) m49 - picket - 53 - w4l11234 5/8"x3 3/8"x20 3/8" (16x86x518) (5) m49 5 plcs screw pfh 8x1 1/8 sd (20 plcs) 1 13/16" 2 1/2" typical spacing.

  • Page 69

    Step 41 t-nut 5/16 sd (12) washer lock ext 8x19 sd (13) bolt wh 5/16x1 1/4 sd (8) bolt wh 5/16x1 1/2 sd (4) l3 - corner board - w4l11210 5/8"x4 3/8"x41 1/2" (16x112x1055) (1) h22 - wall rail - w4l09050 1"x3 3/8"x78" (24x86x1982) (1) m11 - wall rail - w4l09055 5/8"x3 3/8"x39 7/8" (16x86x1012) (1) m24...

  • Page 70

    Step 42 screw pfh 8x1 1/8 sd (20) m49 - picket - 53 - w4l11234 5/8"x3 3/8"x20 3/8" (16x86x518) (5) m49 5 plcs screw pfh 8x1 1/8 sd (20 plcs) 1 13/16" 2 3/8" 2 7/16" 2 5/16" typical spacing.

  • Page 71

    Step 43 screw pfh 8x1 1/2 sd (8) j2 - safety rail - w4l09075 1"x2 3/8"x52 1/4" (24x60x1326) (1) j3 - safety rail - w4l09065 1"x2 3/8"x50 1/2" (24x60x1282) (1) j4 - safety rail - w4l09074 1"x2 3/8"x52" (24x60x1322) (1) j5 - safety rail - w4l09070 1"x2 3/8"x53 3/4" (24x60x1366) (1) note: center safety...

  • Page 72

    Step 44 screw pfh 8x3 sd (2) lag screw wh 5/16x3 sd (4) h11 - roof rafter - w4l11192 1"x3 3/8"x43 7/8" (24x86x1114) (4) lag screw wh 5/16x3 sd (4 plcs) washer lock ext 8x19 sd (4 plcs) screw pfh 8x3 sd (2 plcs) h11 4 plcs 1 11/16" pre-drill 1/8" (3mm) hole washer lock ext 8x19 sd (4).

  • Page 73

    Step 45 screw pfh 8x2 1/2 sd (12) (1) rp1 - peak roof panel - w2a02287 1 5/8"x15 5/8"x60 7/8" (42x396x1546) (1) rp2 - roof panel - w2a02288 1 5/8"x15 5/8"x60 7/8" (42x396x1546) (1) rp5 - roof panel - w2a02291 1 5/8"x15 5/8"x60 7/8" (42x396x1546) rp1 rp2 rp5 screw pfh 8x2 1/2 sd (12 plcs).

  • Page 74

    Step 46 screw pfh 8x2 1/2 sd (12) (1) rp1 - peak roof panel - w2a02287 1 5/8"x15 5/8"x60 7/8" (42x396x1546) (2) rp2 - roof panel - w2a02288 1 5/8"x15 5/8"x60 7/8" (42x396x1546) rp1 rp2 rp2 screw pfh 8x2 1/2 sd (12 plcs).

  • Page 75

    Step 47 screw pfh 8x1 1/8 sd (16) o5 - cleat - w4l11237 5/8"x1 3/8"x36 7/8" (16x34x936) (2) screw pfh 8x1 1/8 sd (16 plcs) o5 centered 3 1/16" 3 1/16".

  • Page 76

    Step 48 screw pfh 8x1 1/8 sd (64) k91 - gable board - w4l11200 3/8"x3 3/8"x49 5/8" (11x86x1260) (2) k92 - gable board - w4l11201 3/8"x3 3/8"x43 1/4" (11x86x1098) (2) k93 - gable board - w4l11202 3/8"x3 3/8"x36 7/8" (11x86x936) (2) k94 - gable board - w4l11203 3/8"x3 3/8"x30 1/2" (11x86x774) (2) k95 ...

  • Page 77

    Step 49 screw pfh 8x1 1/8 sd (3) hp - mesh panel - a100012 (1) n1 - wall board - w4l11235 5/8"x2 3/8"x32" (16x60x812) (1) screw pwh 8x5/8 sd (6) hc - byd id tag (large) 2011 with ages - a100164 (1) screw pfh 8x1/2 sd (4) byd id tag (large) 2011 with ages (1 plc) screw pfh 8x1/2 sd (4 plcs) n1 screw ...

  • Page 78

    Step 50 t-nut 5/16 sd (2) washer lock ext 8x19 sd (2) screw pfh 8x2 1/2 sd (2) washer lock ext 12x19 sd (2) nut barrel wh 5/16x7/8 sd (2) bolt wh 5/16x1/2 sd (2) bolt wh 5/16x1 1/4 sd (2) l1 - wall board - w4l11208 5/8"x4 3/8"x54 1/4" (16x112x1378) (1) j1 - porch rafter - w4l11197 1"x2 3/8"x38 1/8" ...

  • Page 79

    Step 51 screw pfh 8x1 1/8 sd (10) screw pfh 8x2 1/2 sd (6) o6 - cleat - w4l11238 5/8"x1 3/8"x26 3/4" (16x34x680) (1) (1) rp3 - porch panel - w2a02289 1 5/8"x20 5/8"x60 7/8" (42x524x1546) (1) rp4 - porch panel - w2a02290 1 5/8"x15 5/8"x60 7/8" (42x396x1546) rp4 rp3 o6 centered screw pfh 8x2 1/2 sd (1...

  • Page 80

    Step 52 screw pfh 8x2 sd (52) m23 - ladder rung - w4l09099 5/8"x3 3/8"x16 7/8" (16x86x429) (1) m22 - ladder rung - w4l09101 5/8"x3 3/8"x22 1/2" (16x86x572) (11) e2 - ladder rail - w4l09100 1 3/8"x3 3/8"x89 1/4" (36x86x2266) (2) m21 - ladder rung - w4l09102 5/8"x3 3/8"x22 1/2" (16x86x572) (1) e2 e2 m...

  • Page 81

    Step 53 - green hc rock #2 - a6p00037 (5) - green hc rock #1 - a6p00036 (6) t-nut 1/4 sd (22) bolt pth 1/4x3/4 sd (22) washer lock int 8x15 sd (22) bolt pth 1/4x3/4 sd (22 plcs) washer lock int 8x15 sd (22 plcs) t-nut 1/4 sd (22 plcs) green hc rock #1 (6 plcs) green hc rock #2 (5 plcs).

  • Page 82

    Step 54 t-nut 5/16 sd (6) bolt wh 5/16x2 1/4 sd (4) washer lock ext 8x19 sd (8) bolt wh 5/16x3 sd (2) e3 - brace - w4l09103 1 3/8"x3 3/8"x72 5/8" (36x86x1845) (2) g2 - ground board - w4l09104 1"x5 1/4"x89 1/2" (24x134x2274) (1) e3 e3 g2 bolt wh 5/16x3 sd (2 plcs) bolt wh 5/16x2 1/4 sd (4 plcs) washe...

  • Page 83

    Step 55 t-nut 5/16 sd (6) washer lock ext 8x19 sd (2) washer lock ext 12x19 sd (4) nut barrel wh 5/16x7/8 sd (4) bolt wh 5/16x4 1/2 sd (2) bolt wh 5/16x1 1/4 sd (4) dd - triangle plate 105 5 hole - a100005 (2) bolt wh 5/16x2 1/2 sd (4) b2 - swing beam - w4l09090 3"x3"x89 1/2" (76x76x2274) (1) b1 - s...

  • Page 84

    Step 56 (6) single ductile hanger sd - a4m00926 t-nut 3/8 sd (12) washer flat 11x25 sd (12) washer lock int 10x18 sd (12) bolt hex 3/8x3 1/4 sd (12) bolt hex 3/8x3 1/4 sd (12 plcs) washer lock int 10x18 sd (12 plcs) washer flat 11x25 sd (12 plcs) t-nut 3/8 sd (12 plcs) single ductile hanger sd (6 pl...

  • Page 85

    Step 57 bolt hex 5/16x1 3/4 sd (2 plcs) washer split 5/16 sd (2 plcs) washer flat 8x27 sd (2 plcs) bolt hex 3/8x3 1/4 sd (2) washer flat 8x27 sd (2) washer split 5/16 sd (2).

  • Page 86

    Step 58 screw pfh 8x2 sd (104) k12 - floor board - w4l11198 5/8"x5 1/4"x23 1/8" (16x134x586) (1) m20 - floor board - w4l11230 5/8"x3 3/8"x23 1/8" (16x86x586) (1) m19 - floor board - w4l11229 5/8"x3 3/8"x23 1/8" (16x86x586) (24) k12 m19 24 plcs screw pfh 8x2 sd (104 plcs) m20

  • Page 87

    Step 59 washer lock ext 8x19 sd (4) lag screw wh 5/16x3 sd (4) screw pfh 8x2 sd (4) f4 - upright - w4l09063 1 3/8"x2 3/8"x23 1/8" (36x60x586) (2) 3 11/16" 3 11/16" 6 7/8" 13 3/16" f4 2 plcs screw pfh 8x2 sd (4 plcs) washer lock ext 8x19 sd (4 plcs) lag screw wh 5/16x3 sd (4 plcs) leave loose at this...

  • Page 88

    Step 60 washer lock ext 8x19 sd (8) lag screw wh 5/16x3 sd (8) f2 - upright - w4l11186 1 3/8"x2 3/8"x37" (36x60x940) (2) f3 - upright - w4l09093 1 3/8"x2 3/8"x28 1/4" (36x60x716) (2) f3 f2 washer lock ext 8x19 sd (8 plcs) lag screw wh 5/16x3 sd (8 plcs) leave loose at this time. Plastic tunnel to be...

  • Page 89

    Step 61 t-nut 5/16 sd (2) lag screw wh 5/16x2 sd (4) washer lock ext 8x19 sd (4) screw pfh 8x2 sd (4) k10 - arched rail - w4l09094 5/8"x5 1/4"x25 7/8" (16x134x658) (2) k8 - wall rail - w4l09097 5/8"x5 1/4"x27 1/8" (16x134x690) (1) screw pfh 8x1 1/2 sd (4) k8 k10 k10 lag screw wh 5/16x2 sd (4 plcs) w...

  • Page 90

    Step 62 screw pfh 8x1 1/2 sd (6) - tunnel - a6p00273 1/8"x61 3/8"x64 7/8" (2x1558x1649) (1) screw pfh 8x1 1/2 sd (6 plcs) tunnel (1 plc) tighten tighten tighten 2 5/16" 1 3/16" 1" 4 3/16" 7".

  • Page 91

    Step 63 screw pfh 8x1 1/2 sd (4) screw pfh 8x2 sd (12) n6 - wall board - w4l11236 5/8"x2 3/8"x10 3/8" (16x60x264) (2) m16 - wall rail - w4l09092 5/8"x3 3/8"x27 3/4" (16x86x706) (4) n6 2 plcs m16 4 plcs screw pfh 8x1 1/2 sd (4 plcs) screw pfh 8x2 sd (12 plcs).

  • Page 92

    Step 64 t-nut 5/16 sd (8) bolt wh 5/16x2 sd (8) washer lock ext 8x19 sd (12) lag screw wh 5/16x3 sd (4) f1 - upright - w4l11185 1 3/8"x2 3/8"x37" (36x60x940) (2) k9 - wall rail - w4l09096 5/8"x5 1/4"x26 7/8" (16x134x682) (2) k9 k9 f1 lag screw wh 5/16x3 sd (4 plcs) bolt wh 5/16x2 sd (8 plcs) washer ...

  • Page 93

    Step 65 t-nut 5/16 sd (2) bolt wh 5/16x2 sd (4) lag screw wh 5/16x2 sd (4) washer lock ext 8x19 sd (8) screw pfh 8x2 sd (4) k8 - wall rail - w4l09097 5/8"x5 1/4"x27 1/8" (16x134x690) (1) m17 - wall rail - w4l09095 5/8"x3 3/8"x26 7/8" (16x86x682) (2) k11 - arched rail - w4l09098 5/8"x5 1/4"x25 7/8" (...

  • Page 94

    Step 66 lag screw wh 5/16x1 1/2 sd (4) lag screw wh 5/16x1 1/2 sd (4 plcs) hand grip metal green 381 c/c (2 plcs) fx - hand grip metal green 381 c/c - a100118 (2).

  • Page 95

    Step 67 screw pfh 8x1 1/8 sd (24) m47 - picket - 51 - w4l11233 5/8"x3 3/8"x25 1/4" (16x86x640) (6) 3 equally spaced 1 13/16" screw pfh 8x1 1/8 sd (24 plcs) m47 6 plcs.

  • Page 96

    Step 68 kn - chain green 31" - a100177 (2) ef - chain green 57" - a100047 (4) - trapeze - a6p00034 (1) - quick link sd - a4m00927 (6) dp - swing seat green - a100027 (2) swing seat green 22in (2 plcs) quick link sd (6 plcs) chain green 57" (4 plcs) trapeze (2 plcs) chain green 31" (2 plcs).

  • Page 97

    Step 69 t-nut 5/16 sd (4) bolt wh 5/16x1/2 sd (4) fx - hand grip metal green 381 c/c - a100118 (2) bolt wh 5/16x1/2 sd (4 plcs) t-nut 5/16 sd (4 plcs) hand grip metal green 381 c/c (2 plcs).

  • Page 98

    Step 70 t-nut 5/16 sd (2) bolt wh 5/16x1 1/2 sd (2) washer lock ext 8x19 sd (2) ladder assembly bolt wh 5/16x1 1/2 sd (2 plcs) washer lock ext 8x19 sd (2 plcs) ladder assembly t-nut 5/16 sd (2 plcs).

  • Page 99

    Step 71 t-nut 5/16 sd (3) bolt wh 5/16x1 1/4 sd (3) 8 5/8" 1/2" 1/2" t-nut 5/16 sd (3 plcs) o70 screw pfh 8x1 1/8 sd (4 plcs) bolt wh 5/16x1 1/4 sd (3 plcs) 5 1/2" 6 3/8" o70 10' vf slide qu - slide vf 10 ft - a100287 (1) screw pfh 8x1 1/8 sd (4) o70 - slide mounting board - w4l09040 5/8"x1 3/8"x20 ...

  • Page 100

    Step 72 screw pfh 8x1 1/4 sd (12) h18 - seat - w4l11195 1"x3 3/8"x49 7/8" (24x86x1266) (1) g7 - seat - w4l11189 1"x5 1/4"x49 7/8" (24x134x1266) (1) m28 - cleat - w4l11232 5/8"x3 3/8"x5 1/4" (16x86x132) (2) note: pre-drill 3/16" (5mm) for all screws this step 12 1/8" 12 1/8" 12 1/8" 4 3/8" 9 1/8" scr...

  • Page 101

    Step 73 screw pfh 8x1 1/8 sd (3) k16 - safety rail - w4l11199 5/8"x5 1/4"x16 7/8" (16x134x430) (1) screw pfh 8x1 1/8 sd (3 plcs) k16 2 11/16".

  • Page 102: Note:

    Step 74 lag screw wh 5/16x1 1/2 sd (6) typical ground stake installation (see below) - ground stake rebar - a4m00527 (6) note: failure to use ground stakes can void warranty and cause injury! Final step double check every bolt, screw and nut for tightness. Make sure every board is secure and make su...

  • Page 103

    Rev5/20/10 brs limited warranty this limited warranty by backyard discovery applies to products manufactured under the backyard discovery brand or its other brands including but not limited to backyard botanical, adventure playsets, and leisure time products. Backyard discovery warrants that this pr...