1. DL manuals
  2. Backyard Discovery
  3. Baby & Toddler Furniture
  4. 36013
  5. Owner's Manual

Backyard Discovery 36013 Owner's Manual

Manual is about: SCENIC Play House

Summary of 36013

  • Page 1

    • owner's manual • frequently asked questions • assembly instructions • warranty information scenic play house model: #36013 manufacturer: backyard discovery 3001 north rouse pittsburg, ks 66762 1-800-856-4445 made in china ins-36013-a-scenic-eng-12-13-12 features the fastening system. Register your...

  • Page 2: Stop

    Please have the following information when you make your call: 1 – model number of the product located on the front of the assembly manual 2 – desription of the part from the parts list please read this before starting assembly stop missing a part? Call us before going back to the store! The store w...

  • Page 3: For Your Records:

    Owner’s manual play house owner ph-2011 dear customer: please read entire booklet completely before beginning the assembly process. Equipment is recommended for use by children 2 to 10 years of age. Structures are not intended for public use. The company does not warranty any of its residential stru...

  • Page 4

    Owner’s manual play house owner ph-2011 please refer to the assembly section of the assembly manual for maximum fall height. Positioning your play house 1. The play house is designed to be installed on a level surface by an adult with an adult helper. Place in a flat area of your yard to minimize gr...

  • Page 5

    Owner’s manual play house owner ph-2011 the following chart explains the fall height in feet from which a life threatening head injury would not be expected critical heights in feet (m) of tested materials material uncompressed depth compressed depth 6" (152mm) 9" (228mm) 12" (304mm) to 9" (228mm) w...

  • Page 6

    Owner’s manual play house 4. For rusted areas on metallic members such as hand supports, brackets, etc., sand and repaint, using a non lead 16 crf part 1303 . 5. Modifications not approved by the user’s authority to operate the equipment. 6. Inspect wood parts monthly. The grain of the wood sometime...

  • Page 7

    Owner’s manual play house owner ph-2011 appendix a information on playground surfacing materials: the following information is from the united states consumer product safety commission’s information sheet for playground surfacing material; also see the following website for additional information:. ...

  • Page 8

    Owner’s manual play house owner ph-2011 11 this information has been extracted from the cpsc publications “playground surfacing — technical information guide” and “handbook for public playground safety.” copies of these reports can be obtained by sending a postcard to: office of public affairs, u.S....

  • Page 9

    Play house assembly manual faqs: 1. Does the area for the play house need to be level? Yes. Backyard discovery recommends the play house be positioned on a flat level area for maximum safety and durability. Any stakes provided should be used to secure it firmly to the ground. 2. What size area is re...

  • Page 10

    (level 24") (square) (tape measure) (cordless drill or electric drill) (an adult w/ an adult helper) (rubber mallet - optional) (ladder) (phillips screw driver) (drill attachments: phillips head) (3/16" & 1/8" drill bits) tools required for installation: (these are the tools that are generally requi...

  • Page 11: Safe Play Area Diagram

    Safety and assembly information selecting the correct location for your play product is important for your children’s safety and the product’s longevity dimensions: • the scenic has one layout option. Layout ground dimension safe play area* 5'-4 1/2" x 4'-2 1/2" x 4'-7" tall 17'-4 1/2" x 16'-2 1/2" ...

  • Page 12

    Parts identification wood components (not to scale) h1 - shelf support - w103891 1"x3 3/8"x3 7/8" (24x86x98) (7) h4 - bench seat support - w104040 1"x3 3/8"x6 1/2" (24x86x166) (2) h5 - bench upright - w104041 1"x3 3/8"x11 3/4" (24x86x300) (2) h6 - bench ground board - w104042 1"x3 3/8"x18 1/8" (24x8...

  • Page 13

    Parts identification wood components (not to scale) l1 - side wall header - w103887 5/8"x4 3/8"x42 5/8" (16x112x1082) (2) k6 - wall header - w103883 5/8"x5 1/4"x41 3/8" (16x134x1050) (2) l3 - rafter - w104047 5/8"x4 1/4"x28 3/8" (16x108x692) (4) k7 - angled wall board - w103885 5/8"x4 5/8"x23 3/4" (...

  • Page 14

    Parts identification wood components (not to scale) n1 - wall board - w103880 5/8"x2 3/8"x40 1/8" (16x60x1020) (2) n2 - wall board - w103882 5/8"x2 3/8"x40 1/8" (16x60x1020) (2) n3 - wall board - w103888 5/8"x2 3/8"x23 3/4" (16x60x602) (4) n4 - roof cap - w104049 5/8"x2 3/8"x48 3/4" (16x60x1238) (1)...

  • Page 15

    Parts identification wood components (not to scale) wp3 - wall panel - w103877 1 1/4"x18 1/8"x41 3/8" (32x460x1050) rp1 - roof panel - w104046 1 3/8"x28 1/8"x48 3/4" (34x715x1238) dp1 - door panel - w104048 1 1/4"x16 7/8"x18 1/2" (32x430x470) (1) (2) (1).

  • Page 16

    Parts identification hardware d - nut barrel wh 5/16x7/8 - h100005 (9) f - bolt wh 5/16x1 - h100008 (2) g - bolt wh 5/16x1 1/4 - h100009 (4) h - bolt wh 5/16x1 1/2 - h100010 (4) k - bolt wh 5/16x2 - h100012 (26) bg - t-nut 5/16 - h100074 (30) cm - bolt wh 5/16x1/2 - h100115 (2) cv - screw pfh 8x1/2 ...

  • Page 17: Accessories

    Parts identification accessories (not to scale) (1) jr - faucet kit - a100125 js - square sink bowl - a100129 (1) (1) ms - phone kit - a100132 (1) jx - stove assembly - a100136 sw - plastic window 44x266x329 - a100320 (4) td - hinge (door, spring loaded) - a100327 (2) tz - l bracket 2.5x38x50x55 - a...

  • Page 18

    Left and right pot holder assemblies step 1 pre-drilling 1/8" holes in the back edge of h1 is recommended. Use the existing holes in m4 as a guide. Screw pfh 8x1 1/2 screw pfh 8x1 1/2 h1 h1 m4 m4 flush (top & bottom) flush (top & bottom) note hole location note hole location screw pfh 8x1 1/2 (8) m4...

  • Page 19

    Screw pfh 8x1 1/2 screw pfh 8x1 1/2 k4 k5 k4 k5 note hole location note hole location 1 7/8 1 1/4 k5 note hole location 1 1/4 1 7/8 note hole location k5 screw pfh 8x1 1/2 (8) k5 - rear flower pot shelf - w103892 5/8"x2 5/8"x9 1/8" (16x67x232) (2) left and right pot holder assemblies step 2 pre-dril...

  • Page 20: Bench Assembly

    Bench assembly step 1 h6 tz bolt wh 5/16x1/2 washer lock ext 12x19 nut barrel wh 5/16x7/8 tz - l bracket 2.5x38x50x55 - a100340 (2) nut barrel wh 5/16x7/8 (2) washer lock ext 12x19 (2) bolt wh 5/16x1/2 (2) h6 - bench ground board - w104042 1"x3 3/8"x18 1/8" (24x86x460) (2).

  • Page 21: Bench Assembly

    Bench assembly step 2 screw pfh 8x1-3/4 (8) h5 screw pfh 8x1-3/4 1 3/16 h5 - bench upright - w104041 1"x3 3/8"x11 3/4" (24x86x300) (2).

  • Page 22: Bench Assembly

    Bench assembly step 3 screw pfh 8x1-3/4 (8) h4 screw pfh 8x1-3/4 1 9/16 1 9/16 h4 - bench seat support - w104040 1"x3 3/8"x6 1/2" (24x86x166) (2).

  • Page 23: Bench Assembly

    Bench assembly step 4 pre-drilling 1/8" holes in the top edge of h4 is recommended. Use the existing holes in m2 as a guide. Screw pfh 8x1 3/4 m2 screw pfh 8x1 3/4 (8) 1/8 1/8 2 5/8 m2 - bench seat - w104044 5/8"x3 3/8"x27 3/8" (16x86x694) (2) h4 h4.

  • Page 24: Door Assembly

    Door assembly step 1 td - hinge (door, spring loaded) - a100327 (2) td screw pwh 8x3/4 dp1 - door panel - w104048 1 1/4"x16 7/8"x18 1/2" (32x430x470) (1) dp1 screw pwh 8x3/4 (6).

  • Page 25: Door Assembly

    Door assembly step 2 center id tag on door approx. As shown. Screw pfh 6x5/8 (2) xr - byd id tag (small) without ages - a100241 (1) screw pfh 6x5/8.

  • Page 26: Play House Assembly

    Play house assembly step 1 in this step you will make four post assemblies. It is crucial to note the relationship of the id holes with the t-nuts in each assembly as indicated below. T-nut 5/16 id hole right rear post assembly left front post assembly t-nut 5/16 (24) p1 - corner post - w103875 1 3/...

  • Page 27: Play House Assembly

    Play house assembly step 2 (1) right rear post assembly right rear post assembly right front post assembly wp1 wp1 - wall panel - w103874 1 1/4"x18 1/8"x41 3/16" (32x460x1050) (1) bolt wh 5/16x2 washer lock ext 8x19 bolt wh 5/16x2 (6) washer lock ext 8x19 (6) (1) right front post assembly.

  • Page 28: Play House Assembly

    Play house assembly step 3 (1) left rear post assembly wp2 - wall panel - w103876 1 1/4"x18 1/8"x42 5/8" (32x460x1082) (1) bolt wh 5/16x2 (6) washer lock ext 8x19 (6) left rear post assembly bolt wh 5/16x2 washer lock ext 8x19 wp2 wp1.

  • Page 29: Play House Assembly

    Play house assembly step 4 (1) left front post assembly wp3 - wall panel - w103877 1 1/4"x18 1/8"x41 3/8" (32x460x1050) (1) bolt wh 5/16x2 (6) washer lock ext 8x19 (6) left front post assembly bolt wh 5/16x2 washer lock ext 8x19 wp3 wp1 wp2.

  • Page 30: Play House Assembly

    Play house assembly step 5 bolt wh 5/16x2 (4) washer lock ext 8x19 (4) m3 bolt wh 5/16x2 washer lock ext 8x19 m3 - wall rail - w103878 5/8"x3 3/8"x12 1/4" (16x86x310) (2).

  • Page 31: Play House Assembly

    Play house assembly step 6 in this step you will make two gable assemblies. Use 1 1/2" bolts and washers to help with the alignment of parts. You may temporary use a t-nut (not shown) to keep the bolt and washer from falling off. Do not tap in t-nut at this time. Washer lock ext 8x19 (4) washer lock...

  • Page 32: Play House Assembly

    Play house assembly step 7 (1) gable assembly gable assembly nut barrel wh 5/16x7/8 washer lock ext 12x19 screw pfh 8x1 1/8 n1 n1 - wall board - w103880 5/8"x2 3/8"x40 1/8" (16x60x1020) (2) screw pfh 8x1 1/8 (2) nut barrel wh 5/16x7/8 (2) washer lock ext 12x19 (2) from step 6 from step 6 !Caution! B...

  • Page 33: Play House Assembly

    Play house assembly step 8 screw pfh 8x1 1/8 (8) n2 screw pfh 8x1 1/8 n2 - wall board - w103882 5/8"x2 3/8"x40 1/8" (16x60x1020) (2) flush 6 13/16 6 13/16 these holes are closer to the ground.

  • Page 34: Play House Assembly

    Play house assembly step 9 (1) left pot holder assembly bolt wh 5/16x2 (2) washer lock ext 8x19 (2) screw pfh 8x1 1/8 (4) (1) right pot holder assembly left pot holder assembly right pot holder assembly bolt wh 5/16x2 washer lock ext 8x19 screw pfh 8x1 1/8.

  • Page 35: Play House Assembly

    Play house assembly step 10 screw pfh 8x1-1/8 (20) screw pfh 8x1-1/8 m1 m6 m1 - wall board - w103881 5/8"x3 3/8"x23 1/2" (16x86x596) (4) m6 - wall board - w103884 5/8"x3 3/8"x6 7/8" (16x86x175) (4).

  • Page 36: Play House Assembly

    Play house assembly step 11 attach n6 approximately 2" up from ground and locate as shown. Screw pwh 8x3/4 (8) screw pwh 8x3/4 xp xp - metal tie strap - a100414 (1) n6 screw pfh 8x1 1/8 screw pfh 8x1 1/8 (3) n6 - door stop - w104056 5/8"x2 3/8"x3 7/8" (16x60x100) (1).

  • Page 37: Play House Assembly

    Play house assembly step 12 t-nut 5/16 (2) washer lock ext 8x19 (2) nut barrel wh 5/16x7/8 (2) washer lock ext 12x19 (2) (1) gable assembly nut barrel wh 5/16x7/8 washer lock ext 12x19 t-nut 5/16 washer lock ext 8x19 bolt wh 5/16x1 1/4 bolt wh 5/16x1 1/4 (2) l5 gable assembly l5 - angled wall board ...

  • Page 38: Play House Assembly

    Play house assembly step 13 t-nut 5/16 (2) washer lock ext 8x19 (2) screw pfh 8x1 1/8 (4) bolt wh 5/16x1 1/4 (2) screw pfh 8x1 1/4 screw pfh 8x1 1/8 bolt wh 5/16x1 1/4 washer lock ext 8x19 t-nut 5/16 screw pfh 8x1 1/4 (4) k7 - angled wall board - w103885 5/8"x4 5/8"x23 3/4" (16x117x602) (2) l1 - sid...

  • Page 39: Play House Assembly

    Play house assembly step 14 screw pfh 8x1-1/8 (8) screw pfh 8x1-1/4 (4) l1 - side wall header - w103887 5/8"x4 3/8"x42 5/8" (16x112x1082) (1) l1 n3 screw pfh 8x1-1/8 screw pfh 8x1-1/4 n3 l1 1 5/16 n3 - wall board - w103888 5/8"x2 3/8"x23 3/4" (16x60x602) (2).

  • Page 40: Play House Assembly

    Play house assembly step 15 screw pfh 8x1-1/8 (24) n3 - wall board - w103888 5/8"x2 3/8"x23 3/4" (16x60x602) (2) n3 m6 m5 m5 - wall board - w103889 5/8"x3 3/8"x7" (16x86x178) (4) m6 - wall board - w103884 5/8"x3 3/8"x6 7/8" (16x86x175) (4) screw pfh 8x1-1/8.

  • Page 41: Play House Assembly

    Play house assembly step 16 flush j1 screw pfh 8x1 1/2 j1 - shelf support - w103895 1"x2 3/8"x38 3/8" (24x60x976) (1) screw pfh 8x1 1/2 (5).

  • Page 42: Play House Assembly

    Play house assembly step 17 screw pfh 8x1 1/2 (4) j2 screw pfh 8x1 1/2 j2 - shelf support - w103896 1"x2 3/8"x8 7/8" (24x60x224) (2) flush.

  • Page 43: Play House Assembly

    Play house assembly step 18 screw pfh 8x1 1/2 (11) k3 k2 k3 - rear counter top - w103894 5/8"x5 1/4"x40 1/8" (16x134x1018) (1) k2 - front counter top - w103893 5/8"x5 1/4"x40 3/4" (16x134x1034) (1) screw pfh 8x1 1/2 holes to right of sink.

  • Page 44: Play House Assembly

    Play house assembly step 19 screw pfh 8x1 1/2 (8) j3 screw pfh 8x3 screw pfh 8x1 1/2 screw pfh 8x3 (2) j3 - shelf support - w103897 1"x2 3/8"x8 7/8" (24x60x224) (2).

  • Page 45: Play House Assembly

    Play house assembly step 20 center windows in openings and attach as shown. Pre-drilling 3/16" holes using wp as a guide is recommended. Sw wp screw pwh 8x1-1/4 sw - plastic window 44x266x329 - a100320 (4) wp - small plastic window inside trim - a100364 (4) screw pwh 8x1-1/4 (16).

  • Page 46: Play House Assembly

    Play house assembly step 21 screw pfh 8x1 1/2 (9) k1 h1 h1 screw pfh 8x1 1/2 k1 - serving shelf - w103890 5/8"x5 1/4"x35 5/8" (16x134x906) (1) h1 - shelf support - w103891 1"x3 3/8"x3 7/8" (24x86x98) (3).

  • Page 47: Play House Assembly

    Play house assembly step 22 rp1 - roof panel - w104046 1 3/8"x28 1/8"x48 3/4" (34x715x1238) (1) screw pfh 8x1-1/2 (4) screw pfh 8x1-1/2 rp1 flush rp1.

  • Page 48: Play House Assembly

    Play house assembly step 23 rp1 - roof panel - w104046 1 3/8"x28 1/8"x48 3/4" (34x715x1238) (1) screw pfh 8x1 1/2 (4) screw pfh 8x1 1/2 rp1 rp1.

  • Page 49: Play House Assembly

    Play house assembly step 24 screw pfh 8x1 1/8 (10) screw pfh 8x1 1/8 n4 o1 o1 - roof cap - w104050 5/8"x1 3/8"x48 3/4" (16x34x1238) (1) n4 - roof cap - w104049 5/8"x2 3/8"x48 3/4" (16x60x1238) (1) n4 o1.

  • Page 50: Play House Assembly

    Play house assembly step 25 nut barrel wh 5/16x7/8 (2) washer lock ext 12x19 (2) (1) bench assembly bolt wh 5/16x1 washer lock ext 12x19 nut barrel wh 5/16x7/8 bolt wh 5/16x1 (2) bench assembly.

  • Page 51: Play House Assembly

    Play house assembly step 26 screw pwh 8x3/4 (1) screw pfh 8x1 1/8 (4) js - square sink bowl - a100129 (1) (1) jx - stove assembly - a100136 screw pfh 8x1 1/8 screw pwh 8x3/4 jx js.

  • Page 52: Play House Assembly

    Play house assembly step 27 screw pfh 8x1-1/4 (2) (1) jr - faucet kit - a100125 screw pfh 8x1-1/4 screw pfh 8x1/2 screw pfh 8x1/2 (2) (1) ms - phone kit - a100132 jr ms.

  • Page 53: Play House Assembly

    Play house assembly step 28 upon completion of this step, double check to make sure every bolt, screw and nut is tight. Make sure every board is secure. Make sure the play house is level. Enjoy your new playhouse! (1) door assembly center door hinges between indicated boards screw pwh 8x5/8 center d...

  • Page 54

    Limited warranty this limited warranty by backyard discovery applies to products manufactured under the backyard discovery brand or its other brands including but not limited to backyard botanical, adventure playsets, and leisure time products. Backyard discovery warrants that this product is free f...

  • Page 55

    Warranty. Backyard discovery disclaims all other representations and warranties of any kind, express or implied. This warranty gives you specific legal rights. You may have other rights as well which vary from state to state or province to province. This warranty excludes all consequential damages, ...