- DL manuals
- Backyard Discovery
- Baby Accessories
- 40014
- Owner's manual
Backyard Discovery 40014 Owner's manual - Stop
PLEASE HAVE THE FOLLOWING INFORMATION WHEN YOU MAKE YOUR CALL:
1 – MODEL NUMBER OF THE PRODUCT LOCATED ON THE FRONT OF THE ASSEMBLY MANUAL
2 – DESRIPTION OF THE PART FROM THE PARTS LIST
PLEASE READ THIS BEFORE STARTING ASSEMBLY
STOP
Missing A Part?
CALL US BEFORE GOING
BACK TO THE STORE!
The store where you made your purchase
does not stock parts for this item.
If you have assembly questions or if you need parts,
whether they are missing or damaged
Call Toll-Free Help Line or visit www.swingsetsonline.com
1-800-765-4138
•
READ THE ASSEMBLY MANUAL COMPLETELY, PAYING SPECIAL ATTENTION TO THE IMPORTANT TIPS AND
SAFETY INFORMATION.
•
AFTER YOU HAVE READ THE ASSEMBLY MANUAL, YOU WILL BE ABLE TO DECIDE IF YOU NEED PROFESSIONAL
HELP TO COMPLETE THE ASSEMBLY OF THE PLAYSET.
•
SEPARATE AND IDENTIFY ALL PARTS TO MAKE SURE THAT YOU HAVE ALL OF THE PARTS LISTED.
•
IF YOU CAN’T FIND ALL OF THE PARTS, CHECK THE PACKING MATERIAL. SMALL PARTS MAY HAVE FALLEN INTO IT
DURING SHIPMENT.
•
IF YOU HAVE PROBLEMS WITH THE ASSEMBLY OR IF ANY PART IS MISSING OR
DAMAGED, PLEASE CALL THE
HELP LINE
1-800-765-4138
OR VISIT www.swingsetsonline.com.
Summary of 40014
Page 1
Manufacturer: backyard discovery 3001 north rouse pittsburg, ks 66762 1-800-856-4445 made in china features the fastening system. Register your new swing set on-line @ www.Swingsetsonline.Com (you will also find any updates on assembly instructions and information to order replacement parts) save th...
Page 2: Stop
Please have the following information when you make your call: 1 – model number of the product located on the front of the assembly manual 2 – desription of the part from the parts list please read this before starting assembly stop missing a part? Call us before going back to the store! The store w...
Page 3
Owner’s manual play set rev10/14/13 or dear customer: please read entire booklet completely before beginning the assembly process. Equipment is recommended for use by children 3 to 10 years of age. Structures are not intended for public use. The company does not warranty any of its residential struc...
Page 4
Owner’s manual play set rev10/14/13 please refer to the assembly section of the assembly manual for maximum fall height. Positioning your playcenter 1. The playcenter is designed to be installed on a level surface by an adult with an adult helper. Place in a flat area of your yard to minimize ground...
Page 5
Owner’s manual play set rev10/14/13 the following chart explains the fall height in feet from which a life threatening head injury would not be expected critical heights in feet (m) of tested materials material uncompressed depth compressed depth 6" (152mm) 9" (228mm) 12" (304mm) to 9" (228mm) wood ...
Page 6
Owner’s manual play set rev10/14/13 18. Verify that any suspended climbing ropes, chain, or cable are secured at both ends and that they cannot be looped back on it. 19. Instruct children not to attach items to the playground equipment that are not specifically designed for use with the equipment, s...
Page 7
Owner’s manual play set rev10/14/13 additional maintenance: • check the swing beam and hardware every two weeks due to wood expansion and contraction. It is particularly important that this procedure be followed at the beginning of each season. • inspect wood parts monthly. The grain of the wood som...
Page 8
Owner’s manual play set rev10/14/13 appendix a information on playground surfacing materials: the following information is from the united states consumer product safety commission’s information sheet for playground surfacing material; also see the following website for additional information: www.C...
Page 9
Play set assembly manual faqs: 1. Does the area for the playset need to be level? Yes. Backyard discovery recommends the playset be positioned on a flat level area for maximum safety and durability. The stakes provided should be used to secure it firmly to the ground. 2. What size area is recommende...
Page 10
(level 24") (open end wrenches 1/2") (square) (tape measure) (3/8" drive ratchet, 1/2" std sockets 1/2" deep sockets) (claw hammer) (cordless drill or electric drill) (drill attachments: phillips head & socket driver) (an adult w/ an adult helper) (rubber mallet - optional) (ladder) (phillips screw ...
Page 11: Important Assembly Notes
Important assembly notes 1) while assembling unit, take time before and after each phase to make sure fort is level. If fort is not level, assembly will be difficult and improper assembly may result. Extra care must be taken to insure the fort is square. 2) tighten bolts securely, tighten nuts on bo...
Page 12
Parts identification wood components (not to scale) e1 - tower leg - w4l04821 1 3/8"x3 3/8"x89 1/2" (36x86x2274) (1) e2 - tower leg - w4l04822 1 3/8"x3 3/8"x89 1/2" (36x86x2274) (1) e3 - tower leg - w4l04817 1 3/8"x3 3/8"x73 1/8" (36x86x1856) (1) e4 - monkey bar upright - w101733 1 3/8"x3 3/8"x71 3/...
Page 13
Parts identification wood components (not to scale) h7 - bench upright - w4l04765 1"x3 3/8"x15" (24x86x380) (4) h74 - left upright - w100608 1"x3 3/8"x50 3/4" (24x86x1290) (1) h75 - right upright - w100609 1"x3 3/8"x50 3/4" (24x86x1290) (1) h79 - end support - w4l04855 1"x3 1/2"x42" (24x86x1072) (1)...
Page 14
Parts identification wood components (not to scale) l6 - bay window header - w100571 5/8"x4 3/8"x30 1/2" (16x112x774) (2) l7 - gable moon - w100572 5/8"x4 3/8"x13" (16x112x330) (2) l9 - door board - w101233 5/8"x4 3/8"x35" (16x112x890) (1) l10 - door board - w101229 5/8"x4 3/8"x35" (16x112x890) (1) ...
Page 15
Parts identification wood components (not to scale) m13 - wall rail - w101500 5/8"x3 3/8"x8 1/2" (16x86x216) (2) m14 - wall rail - w102372 5/8"x3 3/8"x40 3/8" (16x86x1024) (1) m15 - wall board - w101506 5/8"x3 3/8"x3 1/2" (16x86x88) (8) m16 - wall board - w101732 5/8"x3 3/8"x16 1/4" (16x86x412) (3) ...
Page 16
Parts identification wood components (not to scale) n5 - bay window board - w100592 5/8"x2 3/8"x13 1/8" (16x60x332) (6) n6 - gable board - w100593 5/8"x2 3/8"x13" (16x60x330) (2) n7 - gable board - w100594 5/8"x2 3/8"x8" (16x60x202) (4) n8 - wall board support - w100595 5/8"x2 3/8"x6 3/4" (16x60x170...
Page 17
Parts identification hardware g - bolt wh 5/16x1 1/4 - h100009 (2) h - bolt wh 5/16x1 1/2 - h100010 (22) j - bolt wh 5/16x1 3/4 - h100011 (19) k - bolt wh 5/16x2 - h100012 (40) l - bolt wh 5/16x2 1/4 - h100013 (11) m - bolt wh 5/16x2 1/2 - h100014 (2) ka - bolt wh 5/16x4 1/2 - h100021 (1) v - bolt w...
Page 18
Parts identification hardware ac - washer lock ext 8x19 - h100030 (125) ad - washer lock ext 12x19 - h100031 (19) bg - t-nut 5/16 - h100074 (99) bc - screw pwh 8x3/4 - h100070 (26) cb - washer safety 17x30 - h100103 (4) bx - washer split 5/16 - h100095 (4) br - screw pfh 8x1 1/8 - h100088 (261) bp -...
Page 19
Parts identification hardware bz - swing hanger quick link - h100099 (4) by - swing hanger quick link - h100097 (4) - t-40 torx wrench - a100041 (2) - t-40 torx bit - a100042 (2).
Page 20
Parts identification accessories (not to scale) dg - chain green 38.5" - a100015 (4) ek - slide rail 8' green right - a100054 (1) el - slide rail 8' green left - a100055 (1) fb - swing seat yellow - a100070 (2) ez - chain green 51.25" - a100068 (4) em - slide bed 8' yellow - a100056 (1) ew - glider ...
Page 21
Parts identification accessories (not to scale) dj - glider arm light green - a100021 (2) dn - glider seat dark green - a100025 (1) ec - metal rung 559 - a100045 (6) gk - window frame 216x267 byd green - a100146 (6) hc - byd id tag (large) 2011 with ages - a100164 (1) hz - knob - a100071 (1) qz - tr...
Page 22
Slide assembly step 1 tip: prebending the ends will ease assembly. Nut barrel wh 5/16x5/8 (3) washer lock ext 12x19 (3) bolt wh 5/16x1/2 (3) em - slide bed 8' yellow - a100056 (1) m77 - slide brace - w100544 5/8"x3 3/8"x17 1/4" (16x86x438) (1) use 'm77' slide brace as a template for drilling bottom ...
Page 23
Slide assembly step 2 m78 - center slide brace - w100545 5/8"x3 3/8"x17 1/4" (16x86x438) (2) ek - slide rail 8' green right - a100054 (1) el - slide rail 8' green left - a100055 (1) screw pfh 8x3 (24) tip: a helper is required for this step. Note: make certain supports and slide bed are fully engage...
Page 24
Ladder assembly step 1 screw pfh 8x2 (8) h74 - left upright - w100608 1"x3 3/8"x50 3/4" (24x86x1290) (1) m104 - ladder rung - w102997 1"x3 3/8"x17 1/8" (24x86x434) (4) screw pfh 8x2 (8 plcs) h74 m104 4 plcs.
Page 25
Ladder assembly step 2 screw pfh 8x2 (8) h75 - right upright - w100609 1"x3 3/8"x50 3/4" (24x86x1290) (1) h75 screw pfh 8x2 (8 plcs).
Page 26
Ladder assembly step 3 screw pfh 8x1 1/2 (4) m103 - rear support - w102996 5/8"x3 3/8"x18 1/4" (16x86x462) (1) screw pfh 8x1 1/2 (4 plcs) m103.
Page 27
Ladder assembly step 4 screw pfh 8x1 1/2 (4) m102 - attachment board - w4l04824 5/8"x3 3/8"x18 1/4" (16x86x462) (1) screw pfh 8x1 1/2 (4 plcs) m102.
Page 28
Monkey bar assembly step 1 bolt wh 5/16x1 1/2 (6 plcs) t-nut 5/16 (6 plcs) triangle plate 100° 5 hole (2 plcs) nut lock 5/16 (2 plcs) washer flat 8x27 (2 plcs) l bracket 54x67 (4 plcs) bolt wh 5/16x2 (2 plcs) e71 e71 washer flat 8x27 (2) t-nut 5/16 (6) bolt wh 5/16x1 1/2 (6) nut lock 5/16 (2) bolt w...
Page 29
Monkey bar assembly step 2 e4 e4 bolt wh 5/16x1 1/2 (4 plcs) t-nut 5/16 (4 plcs) t-nut 5/16 (4) bolt wh 5/16x1 1/2 (4) e4 - monkey bar upright - w101733 1 3/8"x3 3/8"x71 3/8" (36x86x1812) (2).
Page 30
Monkey bar assembly step 3 screw tapping 14x1-1/2 (12 plcs) metal rung 559 (6 plcs) screw tapping 14x1-1/2 (12) ec - metal rung 559 - a100045 (6).
Page 31
Monkey bar assembly step 4 bolt wh 5/16x1 3/4 (4 plcs) washer lock ext 8x19 (8 plcs) t-nut 5/16 (6 plcs) lag screw wh 5/16x2 (4 plcs) bolt hex 5/16x2-3/4 (2 plcs) washer lock int 8x15 (2 plcs) washer flat 9x18 (2 plcs) t-nut 5/16 (6) bolt hex 5/16x2-3/4 (2) washer lock ext 8x19 (8) lag screw wh 5/16...
Page 32
Monkey bar assembly step 5 screw tapping 14x1-1/2 (4 plcs) washer lock int 8x15 (4 plcs) washer flat 9x18 (4 plcs) hand grip yellow plastic (2 plcs) washer lock int 8x15 (4) washer flat 9x18 (4) screw tapping 14x1-1/2 (4) ea - hand grip yellow plastic - a100043 (2).
Page 33
Sb74 sb74 - swing beam extended - w102419 2"x5 1/4"x89 1/2" (50x134x2274) (1) tb - swing beam extension bracket-left - a100325 (1) tc - swing beam extension bracket-right - a100326 (1) gd - l bracket 66x66x127 - a100140 (2) bolt wh 5/16x1 3/4 (3) bolt hex 5/16x2-3/4 (2) nut barrel wh 5/16x7/8 (3) wa...
Page 34
Swing beam assembly step 2 w71 - swing beam support - w102420 2"x3 3/8"x49 5/8" (50x86x1260) (1) e77 - angle brace - w100991 1 3/8"x3 3/8"x74 3/8" (36x86x1890) (2) h79 - end support - w100992 1"x3 1/2"x42" (24x86x1072) (1) bolt wh 5/16x4 1/2 (1) bolt wh 5/16x2 (2) lag screw wh 5/16x2 (2) washer lock...
Page 35
Swing beam assembly step 3 bolt wh 5/16x1 3/4 (2) bolt wh 5/16x2 1/2 (2) nut barrel wh 5/16x7/8 (2) nut barrel wh 5/16x1 1/2 (2) washer lock ext 8x19 (2) washer lock ext 12x19 (2) these bolts are required for improved structual strenght of 'w71' support and must be installed. Bolt wh 5/16x2 1/2 (2 p...
Page 36
Swing beam assembly step 4 swing hanger quick link (4) bolt wh 5/16x5 3/4 (2) washer flat 8x27 (6) lag screw wh 5/16x2 1/2 (2) ew - glider support byd green - a100065 (2) ex - glider bushing byd green - a100066 (4) ey - tubing cap glider support - a100067 (4) sb74 glider bushing byd green (4 plcs) t...
Page 37
Swing hanger quick link (4) nut lock 5/16 (4) washer flat 8x27 (4) washer safety 17x30 (4) swing beam assembly step 5 1. Lock nut must be tightened until loop is tight against the safety washer. 2. Swing hanger bolt must be oriented as shown to avoid damage to swing hanger bolt. Sb74 swing hanger qu...
Page 38
Bay window assembly step 1 center 'n9' boards on 'l6' boards. Screw pfh 8x1 1/8 (8 plcs) l6 l6 n5 n5 n9 n9 screw pfh 8x1 1/8 (8) l6 - bay window header - w100571 5/8"x4 3/8"x30 1/2" (16x112x774) (2) n5 - bay window board - w100592 5/8"x2 3/8"x13 1/8" (16x60x332) (2) n9 - bay window board - w100596 5...
Page 39
Bay window assembly step 2 screw pfh 8x1 1/8 (6 plcs) n9 n9 n5 n5 screw pfh 8x1 1/8 (6) n9 - bay window board - w100596 5/8"x2 3/8"x6 1/4" (16x60x158) (2) n5 - bay window board - w100592 5/8"x2 3/8"x13 1/8" (16x60x332) (2) screw pfh 8x1 (2 plcs) screw pfh 8x1 (2).
Page 40
Bay window assembly step 3 screw pfh 8x1 1/8 (6 plcs) n9 n5 n5 n9 n5 - bay window board - w100592 5/8"x2 3/8"x13 1/8" (16x60x332) (2) n9 - bay window board - w100596 5/8"x2 3/8"x6 1/4" (16x60x158) (2) screw pfh 8x1 (2) screw pfh 8x1 1/8 (6) screw pfh 8x1 (2 plcs).
Page 41
Bay window assembly step 4 screw pwh 8x3/4 (12 plcs) window frame 216x267 byd green (3 plcs) screw pwh 8x3/4 (12) gk - window frame 216x267 byd green - a100146 (3).
Page 42
Door assembly step 1 l9 m19 m21 m21 m19 l10 o1 o1 o1 m22 m22 screw pfh 8x1 1/8 (36 plcs) screw pfh 8x1 1/8 (36) l10 - door board - w101229 5/8"x4 3/8"x35" (16x112x890) (1) l9 - door board - w101233 5/8"x4 3/8"x35" (16x112x890) (1) m19 - door board - w101230 5/8"x3 3/8"x35 3/4" (16x86x908) (2) m22 - ...
Page 43
Door assembly step 2 hinge (2 plcs) 5 1/2 23 1/4 (2) hinge - a100093 screw pwh 8x5/8 (4 plcs) screw pwh 8x5/8 (4).
Page 44
Door assembly step 3 screw pwh 8x3/4 (4 plcs) window frame 216x267 byd green (1 plc) screw pwh 8x3/4 (4) gk - window frame 216x267 byd green - a100146 (1).
Page 45
Door assembly step 4 knob (1 plc) screw pfh 8x1 1/8 (1 plc) screw pfh 8x1 1/8 (1) hz - knob - a100071 (1).
Page 46
Roof assembly step 1 make two gable end assemblies. Screw pfh 8x1 1/8 (10 plcs) screw pfh 8x1 1/8 (5 plcs) n3 h3 h3 n6 n7 n7 screw pfh 8x1 1/8 (30) h3 - roof rafter - w101502 1"x3 3/8"x34" (24x86x864) (4) n3 - gable board - w100590 5/8"x2 3/8"x31 1/2" (16x60x800) (2) n7 - gable board - w100594 5/8"x...
Page 47
Roof assembly step 2 38 11/16 1 1 screw pfh 8x1 1/2 (8 plcs) r1 r1 screw pfh 8x1 1/2 (8) r1 - roof board - w101503 3/4"x5 1/2"x42 1/2" (18x140x1081) (2).
Page 48
Roof assembly step 3 screw pfh 8x1 1/2 (48 plcs) screw pfh 8x1 1/2 (48) r1 - roof board - w101503 3/4"x5 1/2"x42 1/2" (18x140x1081) (12) r1 12 plcs.
Page 49
Fort assembly step 1 t-nut 5/16 (4 plcs) bolt wh 5/16x2 (4 plcs) washer lock ext 8x19 (4 plcs) screw pfh 8x2 (4 plcs) t-nut 5/16 (4 plcs) washer lock ext 8x19 (6 plcs) bolt wh 5/16x2 1/4 (4 plcs) lag screw wh 5/16x2 (2 plcs) flush t-nut 5/16 (11 plcs) bolt wh 5/16x2 (4 plcs) washer lock ext 8x19 (4 ...
Page 50
Fort assembly step 2 k1 - base board - w4l04815 5/8"x5 1/4"x84 3/8" (16x134x2144) (1) j1 - floor support - w101037 1"x2 3/8"x3" (24x60x76) (2) bolt wh 5/16x2 (8) washer lock ext 8x19 (10) t-nut 5/16 (13) screw pfh 8x2 (4) bolt wh 5/16x2 1/4 (2) k1 h2 l2 e2 e3 j1 bolt wh 5/16x2 (4 plcs) washer lock e...
Page 51
Fort assembly step 3 lag screw wh 5/16x2 (22) washer lock ext 8x19 (26) t-nut 5/16 (4) lag screw wh 5/16x2 (22 plcs) bolt wh 5/16x4-1/4 (4 plcs) washer lock ext 8x19 (26 plcs) t-nut 5/16 (4 plcs) k2 k2 m14 m8 m6 l3 l3 g1 k2 - base board - w101452 5/8"x5 1/4"x40 3/8" (16x134x1024) (2) m8 - wall rail ...
Page 52
Fort assembly step 4 f1 - deck brace - w101504 1 3/8"x2 3/8"x15 3/4" (36x60x400) (2) bolt wh 5/16x2 (2) washer lock ext 8x19 (4) t-nut 5/16 (2) lag screw wh 5/16x2 (2) bolt wh 5/16x2 (2 plcs) washer lock ext 8x19 (4 plcs) t-nut 5/16 (2 plcs) lag screw wh 5/16x2 (2 plcs) f1 1 2 3 4 5 6 7 8 9 1 0 1 1 ...
Page 53
Fort assembly step 5 screw pfh 8x2 (4) screw pfh 8x2 (4 plcs) screw pwh 8x5/8 (2 plcs) "a" revision tag (1 plc) h5 h5 - floor joist - w102374 1"x3 3/8"x64 3/4" (24x86x1644) (1) sq - "a" revision tag - a100314 (1) screw pwh 8x5/8 (2).
Page 54
Fort assembly step 6 screw pfh 8x1 1/2 (95) screw pfh 8x1 1/2 (95 plcs) l5 l5 m3 17 plcs m3 - floor board - w102375 5/8"x3 3/8"x42 1/4" (16x86x1072) (17) l5 - outer floor board - w102376 5/8"x4 3/8"x37 1/2" (16x112x952) (2).
Page 55
Fort assembly step 7 bolt wh 5/16x2 (4) washer lock ext 8x19 (4) t-nut 5/16 (6) e7 - club house leg - w4l04826 1 3/8"x3 3/8"x42 1/2" (36x86x1078) (1) e5 - club house leg - w101490 1 3/8"x3 3/8"x42 1/2" (36x86x1078) (1) note holes t-nut 5/16 (6 plcs) bolt wh 5/16x2 (4 plcs) washer lock ext 8x19 (4 pl...
Page 56
Fort assembly step 8 bolt wh 5/16x2 (2) washer lock ext 8x19 (6) t-nut 5/16 (2) lag screw wh 5/16x2 (4) m8 m8 m10 lag screw wh 5/16x2 (4 plcs) washer lock ext 8x19 (6 plcs) bolt wh 5/16x2 (2 plcs) t-nut 5/16 (2 plcs) m10 - wall rail - w101494 5/8"x3 3/8"x37 1/2" (16x86x951) (1) m8 - wall rail - w101...
Page 57
Fort assembly step 9 place l brackets approx as shown and oriented like the detail below. Drill through 'm13' boards with a 7/16" dia bit. Bolt wh 5/16x2 (2) washer lock ext 8x19 (4) t-nut 5/16 (2) lag screw wh 5/16x2 (2) m13 m13 m12 m12 bolt wh 5/16x2 (2 plcs) washer lock ext 8x19 (4 plcs) lag scre...
Page 58
Fort assembly step 10 bolt wh 5/16x2 (8) washer lock ext 8x19 (12) t-nut 5/16 (8) lag screw wh 5/16x2 (4) l4 m9 m9 bolt wh 5/16x2 (8 plcs) washer lock ext 8x19 (12 plcs) t-nut 5/16 (8 plcs) lag screw wh 5/16x2 (4 plcs) m9 - wall rail - w101496 5/8"x3 3/8"x37 1/2" (16x86x951) (2) l4 - club house wall...
Page 59
Fort assembly step 11 n4 6 plcs screw pfh 8x1 1/8 (12 plcs) 1 9/16 3 5/16 equal spacing n4 - picket - w101492 5/8"x2 3/8"x21 3/8" (16x60x542) (6) screw pfh 8x1 1/8 (12).
Page 60
Fort assembly step 12 screw pfh 8x1 1/8 (38) screw pfh 8x1 1/8 (38 plcs) m15 8 plcs m16 m4 m15 - wall board - w101506 5/8"x3 3/8"x3 1/2" (16x86x88) (8) m16 - wall board - w101732 5/8"x3 3/8"x16 1/4" (16x86x412) (3) m4 - wall board - w101510 5/8"x3 3/8"x40 5/8" (16x86x1032) (2).
Page 61
Fort assembly step 13 screw pfh 8x1 1/8 (16) screw pfh 8x1 1/8 (16 plcs) y1 m1 y1 y1 - wall board - w101499 5/8"x4"x34 3/8" (16x102x874) (2) m1 - wall board - w101501 5/8"x3"x34 3/8" (16x76x874) (2).
Page 62
Fort assembly step 14 screw pfh 8x1 1/8 (4) screw pfh 8x1 1/8 (4 plcs) n8 - wall board support - w100595 5/8"x2 3/8"x6 3/4" (16x60x170) (2) n8 21" from deck floor.
Page 63
Fort assembly step 15 screw pfh 8x1 1/8 (33) screw pfh 8x1 1/8 (33 plcs) m5 11 plcs m5 - wall board - w101497 5/8"x3 3/8"x38 7/8" (16x86x986) (11).
Page 64
Fort assembly step 16 screw pfh 8x1 1/8 (36) screw pfh 8x1 1/8 (36 plcs) m17 9 plcs m17 - wall board - w101493 5/8"x3 3/8"x21 3/8" (16x86x542) (9).
Page 65
Fort assembly step 17 screw pfh 8x2 (6) screw pfh 8x2 (6 plcs) bay window assembly (1).
Page 66
Fort assembly step 18 center door in opening, left to right and top to bottom. Screw pwh 8x5/8 (6 plcs) screw pwh 8x5/8 (6) door assembly (1).
Page 67
Fort assembly step 19 screw pwh 8x3/4 (8 plcs) window frame 216x267 byd green (2 plcs) gk - window frame 216x267 byd green - a100146 (2) screw pwh 8x3/4 (8).
Page 68
Fort assembly step 20 screw tapping 14x1-1/2 (4 plcs) washer lock int 8x15 (4 plcs) washer flat 9x18 (4 plcs) hand grip yellow plastic (2 plcs) ea - hand grip yellow plastic - a100043 (2) screw tapping 14x1-1/2 (4) washer lock int 8x15 (4) washer flat 9x18 (4).
Page 69
Fort assembly step 21 washer lock ext 8x19 (4) screw pfh 8x1 1/8 (22) bolt wh 5/16x5 (4 plcs) washer lock ext 8x19 (4 plcs) screw pfh 8x1 1/8 (22 plcs) m8 m8 bolt wh 5/16x5 (4) m8 - wall rail - w101454 5/8"x3 3/8"x40 3/8" (16x86x1024) (2).
Page 70
Fort assembly step 22 washer lock ext 8x19 (8) t-nut 5/16 (8) bolt wh 5/16x1 1/2 (8 plcs) washer lock ext 8x19 (8 plcs) t-nut 5/16 (8 plcs) bolt wh 5/16x1 1/2 (8) h7 - bench upright - w4l04765 1"x3 3/8"x15" (24x86x380) (4).
Page 71
Fort assembly step 23 washer lock ext 8x19 (8) t-nut 5/16 (8) bolt wh 5/16x1 3/4 (8 plcs) washer lock ext 8x19 (8 plcs) t-nut 5/16 (8 plcs) bolt wh 5/16x1 3/4 (8) h8 - seat support - w4l04766 1"x3 3/8"x8 1/2" (24x86x216) (4) h8.
Page 72
Fort assembly step 24 washer lock ext 8x19 (4) t-nut 5/16 (4) bolt wh 5/16x2 1/4 (4) bolt wh 5/16x2 1/4 (4 plcs) washer lock ext 8x19 (4 plcs) t-nut 5/16 (4 plcs) h4 h4 - table support - w4l04818 1"x3 3/8"x16 3/4" (24x86x424) (2).
Page 73
Fort assembly step 25 screw pfh 8x1 1/2 (20 plcs) m7 m2 4 plcs screw pfh 8x1 1/2 (20) m2 - table board - w4l04820 5/8"x3 3/8"x40 3/8" (16x86x1024) (4) m7 - table center board - w4l04819 5/8"x3 3/8"x37 1/2" (16x86x952) (1) screw pfh 8x1 1/8 (7 plcs) n1 screw pfh 8x1 1/8 (7) n1 - 5 board cleat - w4l04...
Page 74
Fort assembly step 26 screw pfh 8x1 1/2 (16) screw pfh 8x1 1/2 (16 plcs) q1 4 plcs q1 - bench seat - w4l04816 1"x4 3/8"x42 1/2" (24x112x1078) (4).
Page 75
Fort assembly step 27 drill two 1/4" dia holes through 'm1' as shown below. Locate 'n11' on the outside of 'm1' as shown below. Screw pfh 8x1 1/8 (2) 1 15/16 13/16 1/2 m1 n11 n11 screw pfh 8x1 1/8 (2 plcs) 1 3/8 1 9/16 n11 - door stop - w101236 5/8"x2 3/8"x2" (16x60x51) (1).
Page 76
Glider assembly bolt wh 5/16x5 3/4 (2 plcs) washer flat 8x27 (4 plcs) nut lock 5/16 (2 plcs) glider arm light green (2 plcs) glider seat dark green (1 plc) quick link (4 plcs) chain green 38.5" (4 plcs) dn - glider seat dark green - a100025 (1) dg - chain green 38.5" - a100015 (4) dj - glider arm li...
Page 77
Final assembly step 1 t-nut 5/16 (2 plcs) bolt wh 5/16x1 1/2 (2 plcs) washer lock ext 8x19 (2 plcs) bolt wh 5/16x1 1/2 (2) t-nut 5/16 (2) washer lock ext 8x19 (2) ladder assembly (1).
Page 78
Final assembly step 2 washer flat 8x27 (4 plcs) washer split 5/16 (4 plcs) bolt hex 5/16x1 1/4 (4 plcs) bolt hex 5/16x1 1/4 (4) washer split 5/16 (4) washer flat 8x27 (4) swing beam assembly (1).
Page 79
Final assembly step 3 bolt wh 5/16x1/2 (4 plcs) bolt wh 5/16x1/2 (4) monkey bar assembly (1).
Page 80
Final assembly step 4 drill 7/16" dia holes through slide bed and deck boards at locations shown. Bolt wh 5/16x1/2 (3 plcs) t-nut 5/16 (3 plcs) bolt wh 5/16x1/2 (3) t-nut 5/16 (3) 3 3/4 1 1 3/16 6 7/16 6 7/16 slide assembly (1).
Page 81
Final assembly step 5 screw pwh 8x5/8 (4 plcs) byd id tag (large) 2011 with ages (1 plc) screw pwh 8x5/8 (4) hc - byd id tag (large) 2011 with ages - a100164 (1).
Page 82
Final assembly step 6 glider assembly tighten quick link insert chain into quick link glider assembly (1).
Page 83
Final assembly step 7 chain green 51.25" (4 plcs) quick link (4 plcs) swing seat yellow (2 plcs) fa - quick link - a100069 (4) fb - swing seat yellow - a100070 (2) ez - chain green 51.25" - a100068 (4) tighten quick link insert chain into quick link.
Page 84
Final assembly step 8 tap in ground stakes at an approximate 45° angle at the locations shown. Using ground stakes as a guide, drill 7/16" dia holes. Stake figure 2 stake figure 1 stake figure 3 stake figure 1 stake figure 1 nut barrel wh 5/16x5/8 (2 plcs) washer lock ext 12x19 (2 plcs) bolt wh 5/16...
Page 85
Rev5/20/10 brs limited warranty this limited warranty by backyard discovery applies to products manufactured under the backyard discovery brand or its other brands including but not limited to backyard botanical, adventure playsets, and leisure time products. Backyard discovery warrants that this pr...