1. DL manuals
  2. Backyard Discovery
  3. Lawn and Garden Equipment
  4. 6213
  5. Owner's Manual

Backyard Discovery 6213 Owner's Manual

Manual is about: Cedar Pergola

Summary of 6213

  • Page 1

    Manufacturer: backyard discovery 3001 north rouse pittsburg, ks 66762 1-800-856-4445 made in china features the fastening system. Register your new swing set on-line @ www.Swingsetsonline.Com (you will also find any updates on assembly instructions and information to order replacement parts) save th...

  • Page 2: Stop

    Please have the following information when you make your call: 1 – model number of the product located on the front of the assembly manual 2 – desription of the part from the parts list por favor tenga visible la siguiente informaciÓn cuando llame: 1 - nÚmero de modelo del producto que se encuentra ...

  • Page 3

    Owner’s manual outdoor product eng owner op-2010 rev. 8/5/2009 dear customer: please read entire booklet completely before beginning the assembly process. Structures are not intended for public use. The company does not warranty any of its residential structures subjected to commercial use such as: ...

  • Page 4

    Outdoor product assembly manual faqs: 1. Is the wood treated with chemicals? Backyard discovery uses 100% chinese cedar wood which is naturally bug resistant, decay and rot resistant. To help ensure your families safety, our wood is completely chemical free and we do not use pressure-treated wood. T...

  • Page 5

    (level 24") (square) (tape measure) (cordless drill or electric drill) (drill attachments: phillips head & socket driver) (an adult w/ an adult helper) (rubber mallet - optional) (ladder) (phillips screw driver) tools required for installation: (these are the tools that are generally required for as...

  • Page 6: Important Assembly Notes

    Important assembly notes 1) while assembling unit, take time before and after each phase to make sure pergola is square and level. If pergola is not square and level, assembly will be difficult and improper assembly may result. Extra care must be taken to insure the pergola is square and level. 2) t...

  • Page 7

    Parts identification wood components (not to scale) d1 - joist - w102219 1 3/8"x5 1/4"x75 1/4" (36x134x1912) (8) d2 - slotted joist - w102218 1 3/8"x5 1/4"x75 1/4" (36x134x1912) (12) d3 - center slotted joist - w102217 1 3/8"x5 1/4"x75 1/4" (36x134x1912) (2) d7 - joist - w103318 1 3/8"x5 1/4"x75 1/4...

  • Page 8

    Parts identification hardware vk - nut barrel wh 5/16x7/8 blk - h100192 (81) vl - nut barrel wh 5/16x1-1/2 blk - h100193 (17) vt - screw pfh 8x1-1/2 blk - h100200 (17) vu - screw pfh 8x2-1/2 blk - h100201 (122) vz - lag screw wh 5/16x3 blk - h100206 (9) vx - lag screw wh 5/16x5-1/2 blk - h100204 (15...

  • Page 9

    Parts identification accessories (not to scale) ht - foot 142 square post - a100029 (4) vj - ltp id tag (small) without ages - a100387 (1) sq - "a" revision tag - a100314 (1).

  • Page 10: Important Assembly Tips

    Assembly tip: • if during assembly of beams the threads do not engage, install the bolt without the star washer to seat. Once seated loosen, add washer, and re-tighten. Pergola assembly important assembly tips assembly tip: • to ease assembly and to reduce the chance of splintering the beams, lightl...

  • Page 11

    Step 1 d9 d9 nut barrel wh 5/16x7/8 blk washer lock ext 12x19 blk bolt wh 5/16x2-1/4 blk washer lock ext 8x19 blk k1 note: each board includes 4 holes. Note: each board includes 4 holes. Bolt wh 5/16x2-1/4 blk (8) washer lock ext 12x19 blk (8) washer lock ext 8x19 blk (8) nut barrel wh 5/16x7/8 blk ...

  • Page 12

    Step 2 nut barrel wh 5/16x7/8 blk bolt wh 5/16x2-1/4 blk (16) washer lock ext 12x19 blk (16) washer lock ext 8x19 blk (16) nut barrel wh 5/16x7/8 blk (16) washer lock ext 12x19 blk bolt wh 5/16x2-1/4 blk washer lock ext 8x19 blk d1 d1 k1 note: each board includes 2 holes. Note: each board includes 2...

  • Page 13

    Step 3 bolt wh 5/16x2-1/4 blk (8) washer lock ext 12x19 blk (8) washer lock ext 8x19 blk (8) nut barrel wh 5/16x7/8 blk (8) d7 d7 k1 nut barrel wh 5/16x7/8 blk washer lock ext 12x19 blk bolt wh 5/16x2-1/4 blk washer lock ext 8x19 blk note: each board includes 4 holes. Note: each board includes 4 hol...

  • Page 14

    Step 4 bolt wh 5/16x2-1/4 blk (4) washer lock ext 12x19 blk (4) washer lock ext 8x19 blk (4) nut barrel wh 5/16x7/8 blk (4) k1 - tie plate - w103359 5/8"x5 1/4"x11" (16x134x280) (2) bolt wh 5/16x2-1/4 blk washer lock ext 8x19 blk nut barrel wh 5/16x7/8 blk washer lock ext 12x19 blk d3 d3 k1 d3 - cen...

  • Page 15

    Step 5 bolt wh 5/16x2-1/4 blk (24) washer lock ext 12x19 blk (24) washer lock ext 8x19 blk (24) nut barrel wh 5/16x7/8 blk (24) k1 - tie plate - w103359 5/8"x5 1/4"x11" (16x134x280) (12) note: you will need to assemble six of these joists. Nut barrel wh 5/16x7/8 blk washer lock ext 12x19 blk bolt wh...

  • Page 16

    Step 6 nut barrel wh 5/16x7/8 blk washer lock ext 12x19 blk bolt wh 5/16x2-1/2 blk washer lock ext 8x19 blk bolt wh 5/16x2-1/2 blk washer lock ext 8x19 blk nut barrel wh 5/16x7/8 blk washer lock ext 12x19 blk d9 d71 d71 d9 bolt wh 5/16x2-1/2 blk (8) washer lock ext 12x19 blk (8) washer lock ext 8x19...

  • Page 17

    Step 7 left upright assembly nut barrel wh 5/16x1-1/2 blk washer lock ext 12x19 blk bolt wh 5/16x7-1/4 blk washer lock ext 8x19 blk lag screw wh 5/16x3 blk washer lock ext 8x19 blk d71 d9 d1 d71 d1 d9 wp1 wp1 wp1 note: angle braces 'd71' assemble toward the inside of the pergola assembly. Washer loc...

  • Page 18

    Step 8 right upright assembly note: angle braces 'd71' assemble toward the inside of the pergola assembly. Bolt wh 5/16x7-1/4 blk (4) lag screw wh 5/16x3 blk (2) washer lock ext 12x19 blk (4) washer lock ext 8x19 blk (6) nut barrel wh 5/16x1-1/2 blk (4) nut barrel wh 5/16x1-1/2 blk washer lock ext 1...

  • Page 19

    Step 9 bolt wh 5/16x2-1/2 blk (8) washer lock ext 12x19 blk (8) washer lock ext 8x19 blk (8) nut barrel wh 5/16x7/8 blk (8) nut barrel wh 5/16x7/8 blk washer lock ext 12x19 blk washer lock ext 8x19 blk bolt wh 5/16x2-1/2 blk d7 d70 d7 d70 note: you will need to repeat this process for the opposite s...

  • Page 20

    Step 10 bolt wh 5/16x7-1/4 blk (8) lag screw wh 5/16x3 blk (4) washer lock ext 12x19 blk (8) nut barrel wh 5/16x1-1/2 blk (8) washer lock ext 8x19 blk (12) nut barrel wh 5/16x1-1/2 blk washer lock ext 12x19 blk washer lock ext 8x19 blk bolt wh 5/16x7-1/4 blk lag screw wh 5/16x3 blk washer lock ext 8...

  • Page 21

    Step 11 lag screw wh 5/16x5-1/2 blk washer lock ext 8x19 blk d3 d7 d1 d1 d7 d3 washer lock ext 8x19 blk (2) lag screw wh 5/16x5-1/2 blk (2) locate on center (1) upper center joist assembly - (d3).

  • Page 22

    Step 12 lag screw wh 5/16x5-1/2 blk washer lock ext 8x19 blk lag screw wh 5/16x5-1/2 blk (12) washer lock ext 8x19 blk (12) d2 d2 d2 d7 d1 d1 d7 d2 d2 18 5/16" 18 5/16" 18 3/8" 18 3/8" 18 5/16" 18 5/16" (6) upper slotted joist assembly - (d2) assembly tip: • there are pre-drilled holes located on th...

  • Page 23

    Step 13 screw pfh 8x2-1/2 blk p1 d3 d3 d2 d2 purlin position top view - right corner screw pfh 8x2-1/2 blk (48) 1 1/4 overhang 8" (15 plcs) p1 - roof slat - w102216 1 3/8"x1 3/8"x61 7/8" (36x36x1572) (16).

  • Page 24

    Step 14 screw pfh 8x2-1/2 blk (64) screw pfh 8x2-1/2 blk p1 p1 d3 d2 d3 p1 - roof slat - w102216 1 3/8"x1 3/8"x61 7/8" (36x36x1572) (16).

  • Page 25

    Step 15 • place the pergola exactly where it will be anchored when completed. Then slide a foot 'ht' under each post 'wp1'. Ht - foot 142 square post - a100029 (4) ht ht ht ht wp1 wp1 wp1 wp1.

  • Page 26

    Step 16 • use chalk to trace all the way around the edges of each foot 'ht'. Ht.

  • Page 27

    Ht concrete anchor 3/16x2" concrete anchor 3/16x2" (16) step 17 • move the pergola aside. Place each foot 'ht' inside of the lines drawn around them in step 16. Using a concrete drill bit, pilot drill attachment holes into the concrete. • next, use the 3/16"x2" concrete anchor to attach each foot to...

  • Page 28

    Step 18 • set the pergola back in place, setting each post 'wp1' inside a 'ht' foot. Ht ht ht ht wp1 wp1 wp1 wp1.

  • Page 29

    Step 19 • attach 'ht' feet to each 'wp1' post using 1-1/2" deck screws into each side, as shown. Ht wp1 screw pfh 8x1-1/2 blk screw pfh 8x1-1/2 blk (16).

  • Page 30

    Step 20 sq vj screw pwh 8x5/8 blk screw pfh 8x1/2 blk screw pwh 8x5/8 blk (2) screw pfh 8x1/2 blk (2) • place i.D. Placard 'vj' on front of post approximately as shown. • place revision tag 'sq' on rear of post approximately as shown. Front rear sq - "a" revision tag - a100314 (1) vj - ltp id tag (s...

  • Page 31

    Limited warranty this limited warranty by backyard discovery applies to products manufactured under the backyard discovery brand or its other brands including but not limited to backyard botanical, adventure playsets, and leisure time products. Backyard discovery warrants that this product is free f...