Backyard MASON 36114 Owner's Manual - For Your Records:

Manual is about: Wooden Swing Set

Summary of MASON 36114

  • Page 1

    Manufacturer: backyard discovery 3001 north rouse pittsburg, ks 66762 1-800-856-4445 made in china features the fastening system. Register your new swing set on-line @ www.Swingsetsonline.Com (you will also find any updates on assembly instructions and information to order replacement parts) save th...

  • Page 2: Stop

    Please have the following information when you make your call: 1 – model number of the product located on the front of the assembly manual 2 – desription of the part from the parts list por favor tenga visible la siguiente informaciÓn cuando llame: 1 - nÚmero de modelo del producto que se encuentra ...

  • Page 3: For Your Records:

    Owner’s manual play set rev12/13/12 dear customer: please read entire booklet completely before beginning the assembly process. Equipment is recommended for use by children 3 to 10 years of age. Structures are not intended for public use. The company does not warranty any of its residential structur...

  • Page 4

    Owner’s manual play set rev12/13/12 please refer to the assembly section of the assembly manual for maximum fall height. Positioning your playcenter 1. The playcenter is designed to be installed on a level surface by an adult with an adult helper. Place in a flat area of your yard to minimize ground...

  • Page 5

    Owner’s manual play set rev12/13/12 the following chart explains the fall height in feet from which a life threatening head injury would not be expected critical heights in feet (m) of tested materials material uncompressed depth compressed depth 6" (152mm) 9" (228mm) 12" (304mm) to 9" (228mm) wood ...

  • Page 6

    Owner’s manual play set rev12/13/12 18. Verify that any suspended climbing ropes, chain, or cable are secured at both ends and that they cannot be looped back on it. 19. Instruct children not to attach items to the playground equipment that are not specifically designed for use with the equipment, s...

  • Page 7

    Owner’s manual play set rev12/13/12 additional maintenance: • check the swing beam and hardware every two weeks due to wood expansion and contraction. It is particularly important that this procedure be followed at the beginning of each season. • inspect wood parts monthly. The grain of the wood som...

  • Page 8

    Owner’s manual play set rev12/13/12 appendix a information on playground surfacing materials: the following information is from the united states consumer product safety commission’s information sheet for playground surfacing material; also see the following website for additional information: www.C...

  • Page 9

    Owner’s manual play set rev12/13/12 the american society for testing and materials takes no position respecting the validity of any parent right asserted in connection with any item mentioned in this standard. Users of this standard are expressly advised that determination of the validity of any suc...

  • Page 10

    Play set assembly manual faqs: 1. Does the area for the playset need to be level? Yes. Backyard discovery recommends the playset be positioned on a flat level area for maximum safety and durability. The stakes provided should be used to secure it firmly to the ground. 2. What size area is recommende...

  • Page 11: Important Assembly Notes

    Important assembly notes 1) while assembling unit, take time before and after each phase to make sure fort is level. If fort is not level, assembly will be difficult and improper assembly may result. Extra care must be taken to insure the fort is square. 2) tighten bolts securely, tighten nuts on bo...

  • Page 12

    (level 24") (open end wrenches 1/2") (square) (tape measure) (3/8" drive ratchet, 1/2" std sockets 1/2" deep sockets) (claw hammer) (cordless drill or electric drill) (drill attachments: phillips head & socket driver) (an adult w/ an adult helper) (rubber mallet - optional) (ladder) (phillips screw ...

  • Page 13

    Parts identification wood components (not to scale) e1 - upright - w101084 1 3/8"x3 3/8"x89 1/2" (36x86x2274) (1) e2 - upright - w101104 1 3/8"x3 3/8"x89 1/2" (36x86x2274) (1) e3 - upright - w101106 1 3/8"x3 3/8"x89 1/2" (36x86x2274) (1) e4 - upright - w101107 1 3/8"x3 3/8"x89 1/2" (36x86x2274) (1) ...

  • Page 14

    Parts identification wood components (not to scale) h74 - left upright - w100608 1"x3 3/8"x50 3/4" (24x86x1290) (1) h75 - right upright - w100609 1"x3 3/8"x50 3/4" (24x86x1290) (1) h76 - ladder rung - w100611 1"x3 3/8"x18 1/8" (24x86x460) (4) h79 - end support - w100992 1"x3 1/2"x42" (24x86x1072) (1...

  • Page 15

    Parts identification wood components (not to scale) l3 - rafter - w100913 5/8"x4 3/8"x38 1/4" (16x112x972) (4) l1 - outer floor board - w101110 5/8"x4 3/8"x40 1/8" (16x112x1018) (2) l2 - outer wall slat - w101100 5/8"x4 3/8"x39" (16x112x992) (4) m12 - tarp brace - w101089 5/8"x3 3/8"x41" (16x86x1042...

  • Page 16

    Parts identification wood components (not to scale) m16 - center wall slat - w101102 5/8"x3 3/8"x20 3/8" (16x86x518) (6) m18 - door board - w100918 5/8"x3 3/8"x39 1/2" (16x86x1002) (2) m20 - door board - w100920 5/8"x3"x38 1/4" (16x76x972) (1) m21 - door board - w100919 5/8"x3"x38 1/4" (16x76x972) (...

  • Page 17

    Parts identification wood components (not to scale) m78 - center slide brace - w100545 5/8"x3 3/8"x17 1/4" (16x86x438) (2) n1 - center rail - w101113 5/8"x2 3/8"x25 5/8" (16x60x652) (1) n2 - tie slat - w101103 5/8"x2 3/8"x14 5/8" (16x60x372) (2) n3 - tie slat - w101119 5/8"x2 3/8"x8" (16x60x204) (2)...

  • Page 18

    Parts identification hardware cm - bolt wh 5/16x1/2 - h100115 (7) f - bolt wh 5/16x1 - h100008 (1) h - bolt wh 5/16x1 1/2 - h100010 (32) j - bolt wh 5/16x1 3/4 - h100011 (6) k - bolt wh 5/16x2 - h100012 (13) l - bolt wh 5/16x2 1/4 - h100013 (4) m - bolt wh 5/16x2 1/2 - h100014 (9) p - bolt wh 5/16x3...

  • Page 19

    Parts identification hardware br - screw pfh 8x1 1/8 - h100088 (273) bq - screw pfh 8x1 1/4 - h100087 (52) bp - screw pfh 8x1 1/2 - h100086 (86) bs - screw pfh 8x1 3/4 - h100089 (9) ck - screw pfh 8x2 - h100111 (33) bw - screw pfh 8x3 - h100092 (26) z - lag screw wh 5/16x2 - h100027 (32) aa - lag sc...

  • Page 20

    Parts identification accessories (not to scale) gk - window frame 216x267 byd green -a100146 (1) ey - tubing cap glider support -a100067 (4) dk - glider arm byd green - a100022 (2) ex - glider bushing byd green - a100066 (4) qz - triangle plate 100° 5 hole - a100294 (2) gf - magnetic catch kit -a100...

  • Page 21

    Parts identification accessories (not to scale) ek - slide rail 8' green right - a100054 (1) el - slide rail 8' green left - a100055 (1) em - slide bed 8' yellow - a100056 (1) fb - swing seat yellow - a100070 (2) kd - plastic ground stake brown - a100179 (6) dg - chain green 38.5" - a100015 (4) ez -...

  • Page 22

    Qty description 1 slide brace 3 bolt wh 5/16x1/2 3 nut barrel wh 5/16x5/8 3 washer lock ext 12x19 1 slide bed 8' yellow 3 5/8 8 5/8 13 5/8 1 nut barrel wh 5/16x5/8 washer lock ext 12x19 slide brace bolt wh 5/16x1/2 slide bed 8' yellow 8 foot slide assembly phase 1 phase notes ● drill 3 holes at one ...

  • Page 23

    Qty description 2 center slide brace 24 screw pfh 8x3 1 slide rail 8' green right 1 slide rail 8' green left slide rail 8' green left slide rail 8' green right center slide brace 8 foot slide assembly phase 2 phase notes ● place 1 slide rail on a flat surface and begin inserting slide bed at the bot...

  • Page 24

    Qty description label 1 left upright h74 4 ladder rung h76 8 screw pfh 8x2 qty description label 1 right upright h75 8 screw pfh 8x2 4 ft ladder phase 1 & 2 phase notes • assemble with hardware as shown. • center rungs in rail grooves. H74 h76 screw pfh 8x2 h75 screw pfh 8x2.

  • Page 25

    Qty description label 1 rear support m73 4 screw pfh 8x2 4 ft ladder phase 3 phase notes • assemble with hardware as shown. Screw pfh 8x2 m73.

  • Page 26: Swing Beam Assembly

    Step 1 attach (2) qz triangle plates to sb74 swing beam using 1-3/4" bolts, lock washer and 7/8" barrel nut. Attach (2) gd l brackets to sb74 swing beam using 2-3/4" hex bolts, flat washers and 5/16" lock nuts. Swing beam assembly sb74 qz gd sb74 - swing beam - w102304 2"x5 1/4"x89 1/2" (50x134x2274...

  • Page 27: Swing Beam Assembly

    Step 2 insert (2) 2-1/2" bolts, lock washers and 1-1/2" barrel nuts into top edge of w71 swing beam support, as shown. Attach e77 angle braces to w71 swing beam support using 4- 1/2" bolts, lock washers and 7/8" barrel nuts. Attach h79 end support to e77 angle braces using 2" bolts, lock washers and...

  • Page 28: Swing Beam Assembly

    Step 3 attach (2) qz triangle plates to w71 swing beam support using 1-3/4" bolts and 7/8" barrel nuts (fig. 1). Insert swing hanger quick link and safety washer into holes in the edge of sb74 swing beam. Secure swing hanger to w71 swing beam using flat washers and 5/16" lock nuts (fig.2). Attach ew...

  • Page 29

    Step 1 bolt wh 5/16x1 1/2 (8 plcs) washer lock ext 8x19 (12 plcs) t-nut 5/16 (2 plcs) k6 g3 k2 e1 e2 nut barrel wh 5/16x7/8 (10 plcs) washer lock ext 12x19 (10 plcs) bolt wh 5/16x2 1/4 (4 plcs) bolt wh 5/16x2 (4 plcs) bolt wh 5/16x2 1/4 (2) bolt wh 5/16x1 1/2 (8) t-nut 5/16 (2) washer lock ext 8x19 ...

  • Page 30

    Step 2 nut barrel wh 5/16x7/8 (16 plcs) washer lock ext 12x19 (16 plcs) g4 e4 e3 k6 g5 m2 k2 k1 bolt wh 5/16x1 1/2 (2 plcs) bolt wh 5/16x2 (2 plcs) bolt wh 5/16x1 1/2 (4 plcs) bolt wh 5/16x2 (4 plcs) washer lock ext 8x19 (2 plcs) bolt wh 5/16x2 1/4 (4 plcs) washer lock ext 8x19 (18 plcs) t-nut 5/16 ...

  • Page 31

    Step 3 k3 g2 k4 washer lock ext 8x19 (12 plcs) lag screw wh 5/16x2 (12 plcs) g2 - wall rail - w101122 1"x5 1/4"x43" (24x134x1092) (1) k4 - wall rail - w101093 5/8"x5 1/4"x43" (16x134x1092) (1) k3 - double arch rail - w101092 5/8"x5 1/4"x43" (16x134x1092) (1) lag screw wh 5/16x2 (12) washer lock ext ...

  • Page 32

    Step 4 k4 g1 k4 g1 - wall rail - w101111 1"x5 1/4"x43" (24x134x1092) (1) k4 - wall rail - w101093 5/8"x5 1/4"x43" (16x134x1092) (2) washer lock ext 8x19 (12) lag screw wh 5/16x2 (12) lag screw wh 5/16x2 (12 plcs) washer lock ext 8x19 (12 plcs) 7/8".

  • Page 33

    Step 5 j1 j1 j1 j1 h1 h1 - floor joist - w102377 1"x3 3/8"x41 1/8" (24x86x1044) (1) j1 - floor support - w101037 1"x2 3/8"x3" (24x60x76) (4) screw pfh 8x2 (4 plcs) screw pfh 8x1 3/4 (8 plcs) screw pfh 8x1 3/4 (8) screw pfh 8x2 (4) flush.

  • Page 34

    Step 6 l1 l1 m4 screw pfh 8x1 1/2 (68 plcs) l1 - outer floor board - w101110 5/8"x4 3/8"x40 1/8" (16x112x1018) (2) m4 - floor board - w101109 5/8"x3 3/8"x44 7/8" (16x86x1140) (10) screw pfh 8x1 1/2 (68).

  • Page 35

    Step 7 washer lock ext 8x19 (6 plcs) lag screw wh 5/16x2 (2 plcs) bolt wh 5/16x1 1/2 (4 plcs) nut barrel wh 5/16x7/8 (4) washer lock ext 8x19 (6) washer lock ext 12x19 (4) bolt wh 5/16x1 1/2 (4) lag screw wh 5/16x2 (2) m11 m7 m11 m7 - wall rail - w101099 5/8"x3 3/8"x43" (16x86x1092) (1) m11 - wall r...

  • Page 36

    Step 8 m3 m3 - angle brace - w101121 5/8"x3 3/8"x52 1/2" (16x86x1335) (1) bolt wh 5/16x1 1/2 (1 plcs) washer lock ext 8x19 (2 plcs) bolt wh 5/16x1 (1 plcs) bolt wh 5/16x1 1/2 (1) nut barrel wh 5/16x5/8 (1) nut barrel wh 5/16x7/8 (1) bolt wh 5/16x1 (1) washer lock ext 8x19 (2) washer lock ext 12x19 (...

  • Page 37

    Step 9 screw tapping 14x3/4 (2 plcs) screw tapping 14x3/4 (2) screw pfh 8x1 1/8 (2) n1 n1 - center rail - w101113 5/8"x2 3/8"x25 5/8" (16x60x652) (1) ej - l bracket 54x67 - a100053 (1) ej screw pfh 8x1 1/8 (2 plcs).

  • Page 38

    Step 10 screw pfh 8x1 1/8 (20 plcs) m14 m14 - wall slat - w101115 5/8"x3 3/8"x25 5/8" (16x86x652) (5) screw pfh 8x1 1/8 (20) 2-7/8".

  • Page 39

    Step 11 m14 - wall slat - w101115 5/8"x3 3/8"x25 5/8" (16x86x652) (6) screw pfh 8x1 1/8 (24) screw pfh 8x1 1/8 (24 plcs) m14 2-7/8".

  • Page 40

    Step 12 m14 - wall slat - w101115 5/8"x3 3/8"x25 5/8" (16x86x652) (5) screw pfh 8x1 1/8 (20) screw pfh 8x1 1/8 (20 plcs) m14 2-7/8".

  • Page 41

    Step 13 m12 m12 e5 e6 m5 e5 - upright - w101085 1 3/8"x3 3/8"x66" (36x86x1676) (1) e6 - upright - w101120 1 3/8"x3 3/8"x66" (36x86x1676) (1) m5 - tarp support - w101125 5/8"x3 3/8"x44 1/4" (16x86x1124) (1) m12 - tarp brace - w101089 5/8"x3 3/8"x41" (16x86x1042) (2) nut barrel wh 5/16x7/8 (7) bolt wh...

  • Page 42

    Step 14 m15 m15 - wall slat - w101126 5/8"x3 3/8"x23 1/4" (16x86x591) (8) screw pfh 8x1 1/8 (32 plcs) screw pfh 8x1 1/8 (32) 3-1/4" 2-7/8".

  • Page 43

    Step 15 washer lock ext 12x19 (8 plcs) bolt wh 5/16x3 (2) bolt wh 5/16x2 1/2 (6) nut barrel wh 5/16x7/8 (8) washer lock ext 8x19 (8) washer lock ext 12x19 (8) bolt wh 5/16x2 1/2 (6 plcs) bolt wh 5/16x3 (2 plcs) nut barrel wh 5/16x7/8 (8 plcs) washer lock ext 8x19 (8 plcs) d1 - picnic table support b...

  • Page 44

    Step 16 build (2) bench assemblies. M10 m10 m10 n3 screw pfh 8x1 1/8 (3 plcs) screw pfh 8x1 1/8 (6) m10 - picnic table board - w101118 5/8"x3 3/8"x41 5/8" (16x86x1056) (6) n3 - tie slat - w101119 5/8"x2 3/8"x8" (16x60x204) (2) note: hole orientations.

  • Page 45

    Step 17 screw pfh 8x1 1/2 (12 plcs) screw pfh 8x1 1/2 (12) (2) bench assembly.

  • Page 46

    Step 18 evenly space boards. M16 m13 m13 l2 l2 n2 l2 - outer wall slat - w101100 5/8"x4 3/8"x39" (16x112x992) (2) screw pfh 8x1 1/8 (43) m13 - wall slat - w101101 5/8"x3 3/8"x39" (16x86x992) (6) m16 - center wall slat - w101102 5/8"x3 3/8"x20 3/8" (16x86x518) (3) n2 - tie slat - w101103 5/8"x2 3/8"x...

  • Page 47

    Step 19 screw pwh 8x3/4 (4 plcs) screw pwh 8x3/4 (4) eb - window frame green 343x444.5 -a100044 (1).

  • Page 48

    Step 20 evenly space boards. M16 m13 m13 l2 l2 n2 l2 - outer wall slat - w101100 5/8"x4 3/8"x39" (16x112x992) (2) n2 - tie slat - w101103 5/8"x2 3/8"x14 5/8" (16x60x372) (1) m16 - center wall slat - w101102 5/8"x3 3/8"x20 3/8" (16x86x518) (3) m13 - wall slat - w101101 5/8"x3 3/8"x39" (16x86x992) (6)...

  • Page 49

    Step 21 eb - window frame green 343x444.5 -a100044 (1) screw pwh 8x3/4 (4) screw pwh 8x3/4 (4 plcs).

  • Page 50

    Step 22 m13 screw pfh 8x1 1/8 (16 plcs) screw pfh 8x1 1/8 (16) m13 - wall slat - w101101 5/8"x3 3/8"x39" (16x86x992) (4).

  • Page 51

    Step 23 10-1/2" 1-1/2" flush screw pfh 8x1 1/8 (7) o2 m40 m40 - strike plate block - w101134 5/8"x3 3/8"x1" (16x86x24) (1) o2 - door mounting rail - w101133 5/8"x1 3/8"x39" (16x34x992) (1) gj gh gj - strike plate - a100145 strike (1) gh - screw - a100145 screw (1) screw pfh 8x1 1/8 (5 plcs) screw pf...

  • Page 52

    Step 24 m21 m20 o1 o1 o1 m18 m18 m22 m23 hz gk gf fr m23 - door board - w100922 5/8"x3 3/8"x6 1/4" (16x86x160) (2) m22 - door board - w100921 5/8"x3 3/8"x25" (16x86x634) (2) m21 - door board - w100919 5/8"x3"x38 1/4" (16x76x972) (1) m20 - door board - w100920 5/8"x3"x38 1/4" (16x76x972) (1) m18 - do...

  • Page 53

    Step 25 screw pph 4x5/8 (6 plcs) screw pph 4x5/8 (6) (1) door assembly.

  • Page 54

    Step 26 build (2) gable assemblies screw pfh 8x1 1/8 (8 plcs) screw tapping 14x3/4 (5 plcs) screw tapping 14x3/4 (10) screw pfh 8x1 1/8 (16) l3 - rafter - w100913 5/8"x4 3/8"x38 1/4" (16x112x972) (4) n4 n6 n5 n6 l3 l3 n4 - horizontal sunburst - w100914 5/8"x2 3/8"x32 7/8" (16x60x835) (2) n5 - vertic...

  • Page 55

    Step 27 bolt wh 5/16x1 1/2 (4 plcs) nut barrel wh 5/16x7/8 (4 plcs) washer lock ext 12x19 (4 plcs) washer lock ext 8x19 (4 plcs) bolt wh 5/16x1 1/2 (4) nut barrel wh 5/16x7/8 (4) washer lock ext 8x19 (4) washer lock ext 12x19 (4) (2) gable assembly.

  • Page 56

    Step 28 screw pfh 8x1 1/4 (4 plcs) screw pfh 8x1 1/4 (4) k91 - roof slat - w100917 3/8"x3 3/8"x50" (11x86x1270) (2).

  • Page 57

    Step 29 screw pfh 8x1 1/4 (44 plcs) screw pfh 8x1 1/4 (44) k91 - roof slat - w100917 3/8"x3 3/8"x50" (11x86x1270) (22).

  • Page 58

    Step 30 screw pwh 8x3/4 (8 plcs) jz - picnic tarp - a100143 (1) screw pwh 8x3/4 (8).

  • Page 59

    Step 31 bolt pth 1/4x1 (2 plcs) washer lock int 8x15 (4 plcs) washer flat 9x18 (4 plcs) t-nut 1/4 (2 plcs) screw tapping 14x1-1/2 (2 plcs) bolt pth 1/4x1 (2) washer flat 9x18 (4) washer lock int 8x15 (4) t-nut 1/4 (2) screw tapping 14x1-1/2 (2) ea - hand grip yellow plastic - a100043 (2).

  • Page 60

    Step 32 lag screw wh 5/16x2 (2 plcs) washer lock ext 8x19 (2 plcs) lag screw wh 5/16x2 (2) washer lock ext 8x19 (2) (1) ladder assembly.

  • Page 61

    Step 33 washer flat 8x27 (4 plcs) washer split 5/16 (4 plcs) bolt hex 5/16x1 1/4 (4 plcs) t-nut 5/16 (4 plcs) (1) swing beam assembly bolt hex 5/16x1 1/4 (4) washer flat 8x27 (4) t-nut 5/16 (4) washer split 5/16 (4).

  • Page 62

    Step 34 tighten quick link insert chain into quick link nut lock 5/16 (2 plcs) washer flat 8x27 (2 plcs) bolt wh 5/16x5 3/4 (2 plcs) fa fb - swing seat yellow - a100070 (2) dl - glider seat yellow - a100023 (1) fa - quick link - a100069 (8) dk - glider arm byd green - a100022 (2) nut lock 5/16 (2) w...

  • Page 63

    Step 35 7 5/8" 2 5/8" 2 5/8" nut barrel wh 5/16x5/8 (3 plcs) washer lock ext 12x19 (3 plcs) bolt wh 5/16x1/2 (3 plcs) bolt wh 5/16x1/2 (3) washer lock ext 8x19 (3) nut barrel wh 5/16x5/8 (3) (1) slide assembly 1".

  • Page 64

    Step 36 screw pth #14x2-1/2 (1) flange cup washer (1) (1) telescope kit - 1992.

  • Page 65

    Anchoring instructions step 37 drive ground stake into ground and fasten with 2" screw. Final step double check every bolt, screw and nut for tightness. Make sure every board is secure and make sure the play set is level. Enjoy your new play set! Note: failure to use ground stakes can void warranty ...

  • Page 66

    Rev5/20/10 brs limited warranty this limited warranty by backyard discovery applies to products manufactured under the backyard discovery brand or its other brands including but not limited to backyard botanical, adventure playsets, and leisure time products. Backyard discovery warrants that this pr...