1. DL manuals
  2. Backyard
  3. Swing Set
  4. SARATOGA
  5. Owner's Manual

Backyard SARATOGA Owner's Manual

Summary of SARATOGA

  • Page 1

    • owner's manual • frequently asked questions • assembly instructions • warranty information saratoga wooden swing set model: #30011 manufacturer: backyard discovery 3001 north rouse pittsburg, ks 66762 1-800-856-4445 made in china ,166$5$72*$(1* features the fastening system. Register your new swin...

  • Page 2: Stop

    Please have the following information when you make your call: 1 – model number of the product located on the front of the assembly manual 2 – desription of the part from the parts list por favor tenga visible la siguiente informaciÓn cuando llame: 1 - nÚmero de modelo del producto que se encuentra ...

  • Page 3: For Your Records:

    Owner’s manual play set rev5/09/12 dear customer: please read entire booklet completely before beginning the assembly process. Equipment is recommended for use by children 3 to 10 years of age. Structures are not intended for public use. The company does not warranty any of its residential structure...

  • Page 4

    Owner’s manual play set rev5/09/12 please refer to the assembly section of the assembly manual for maximum fall height positioning your playcenter 1. The playcenter is designed to be installed on a level surface by an adult with an adult helper. Place in a flat area of your yard to minimize ground p...

  • Page 5

    Owner’s manual play set rev5/09/12 the following chart explains the fall height in feet from which a life threatening head injury would not be expected critical heights in feet (m) of tested materials material uncompressed depth compressed depth 6" (152mm) 9" (228mm) 12" (304mm) to 9" (228mm) wood c...

  • Page 6

    Owner’s manual play set rev5/09/12 18. Verify that any suspended climbing ropes, chain, or cable are secured at both ends and that they cannot be looped back on it. 19. Instruct children not to attach items to the playground equipment that are not specifically designed for use with the equipment, su...

  • Page 7

    Owner’s manual play set rev5/09/12 additional maintenance: • check the swing beam and hardware every two weeks due to wood expansion and contraction. It is particularly important that this procedure be followed at the beginning of each season. • inspect wood parts monthly. The grain of the wood some...

  • Page 8

    Owner’s manual play set rev5/09/12 appendix a information on playground surfacing materials: the following information is from the united states consumer product safety commission’s information sheet for playground surfacing material; also see the following website for additional information: www.Cp...

  • Page 9

    ZĞǀϱͬϮϬͬϭϬz^ play set assembly manual faqs: 1. Does the area for the playset need to be level? Yes. Backyard discovery recommends the playset be positioned on a flat level area for maximum safety and durability. The stakes provided should be used to secure it firmly to the ground. 2. What size area ...

  • Page 10

    ZĞǀϱͬϮϬͬϭϬz^ www.Swingsetsonline.Com/support.Aspx and follow the prompts to order them. Next, read the assembly manual and get the tools ready for the job as recommended in the manual. If the assembly manual is lost or misplaced a new one can be printed from backyard discovery’s website: www.Swingse...

  • Page 11

    Tools required for installation: (these are the tools that are generally required for assembly of our swing sets. These tools are not included in the swing set purchase.) (level 24") (open end wrenches 1/2") (square) (tape measure) (3/8" drive ratchet, 1/2" std sockets 1/2" deep sockets) (claw hamme...

  • Page 12: Important Assembly Notes

    Important assembly notes 1) while assembling unit, take time before and after each phase to make sure fort is level. If fort is not level, assembly will be difficult and improper assembly may result. Extra care must be taken to insure the fort is square. 2) pay close attention to the items needed fo...

  • Page 13

    3duwv,ghqwlilfdwlrq :rrg&rpsrqhqwv (not to scale) k91 - roof slat - w100917 3/8"x3 3/8"x50" (11x86x1270) h74 - left upright - w100608 1"x3 3/8"x50 3/4" (24x86x1290) h75 - right upright - w100609 1"x3 3/8"x50 3/4" (24x86x1290) l3 - rafter - w100913 5/8"x4 3/8"x38 1/4" (16x112x972) n4 - horizontal sun...

  • Page 14

    3duwv,ghqwlilfdwlrq :rrg&rpsrqhqwv (not to scale) e77 - angle brace - w100991 1 3/8"x3 3/8"x74 3/8" (36x86x1890) h82 - monkey bar ground board - w100994 1"x3 3/8"x70 3/8" (24x86x1786) e5 - upright - w101085 1 3/8"x3 3/8"x66" (36x86x1676) k1 - ground board - w101090 5/8"x5 1/4"x74 1/4" (16x134x1886) ...

  • Page 15

    3duwv,ghqwlilfdwlrq :rrg&rpsrqhqwv (not to scale) g3 - cabin arch - w101096 1"x5 1/4"x41 1/8" (24x134x1044) m2 - wall rail - w101097 5/8"x3 3/8"x67 5/8" (16x86x1718) m7 - wall rail - w101099 5/8"x3 3/8"x43" (16x86x1092) l2 - outer wall slat - w101100 5/8"x4 3/8"x39" (16x112x992) m13 - wall slat - w1...

  • Page 16

    3duwv,ghqwlilfdwlrq :rrg&rpsrqhqwv (not to scale) n1 - center rail - w101113 5/8"x2 3/8"x25 5/8" (16x60x652) m14 - wall slat - w101115 5/8"x3 3/8"x25 5/8" (16x86x652) m11 - wall rail - w101116 5/8"x3 3/8"x41 1/8" (16x86x1044) m10 - picnic table board - w101118 5/8"x3 3/8"x41 5/8" (16x86x1056) e6 - u...

  • Page 17

    3duwv,ghqwlilfdwlrq +dugzduh cm - bolt wh 5/16x1/2 - h100115 (11) f - bolt wh 5/16x1 - h100008 (1) h - bolt wh 5/16x1 1/2 - h100010 (46) j - bolt wh 5/16x1 3/4 - h100011 (6) k - bolt wh 5/16x2 - h100012 (15) l - bolt wh 5/16x2 1/4 - h100013 (9) m - bolt wh 5/16x2 1/2 - h100014 (9) p - bolt wh 5/16x3...

  • Page 18

    3duwv,ghqwlilfdwlrq +dugzduh br - screw pfh 8x1 1/8 - h100088 (258) bq - screw pfh 8x1 1/4 - h100087 (52) bp - screw pfh 8x1 1/2 - h100086 (86) bs - screw pfh 8x1 3/4 - h100089 (9) ck - screw pfh 8x2 - h100111 (35) bw - screw pfh 8x3 - h100092 (26) z - lag screw wh 5/16x2 - h100027 (36) bl - screw t...

  • Page 19

    3duwv,ghqwlilfdwlrq $ $ $ $ffffffffhhhhvvvvvvvvrrrruuuullllhhhhvvvv (not to scale) ek - slide rail 8' green right - a100054 (1) el - slide rail 8' green left - a100055 (1) em - slide bed 8' yellow - a100056 (1) fb - swing seat yellow - a100070 (2) hc - byd id tag (large) 2011 with ages - a100164 (2)...

  • Page 20

    3duwv,ghqwlilfdwlrq $ $ $ $ffffffffhhhhvvvvvvvvrrrruuuullllhhhhvvvv (not to scale) (2) fr - leaf hinge - a100093 jz - picnic tarp - a100143 (1) dl - glider seat yellow - a100023 (1) ex - glider bushing byd green - a100066 (4) dk - glider arm byd green - a100022 (2) ew - glider support byd green - a1...

  • Page 21

    Qty description 1 slide brace 3 bolt wh 5/16x1/2 3 nut barrel wh 5/16x5/8 3 washer lock ext 12x19 1 slide bed 8' yellow nut barrel wh 5/16x5/8 washer lock ext 12x19 slide brace bolt wh 5/16x1/2 slide bed 8' yellow 8 foot slide assembly phase 1 phase notes Ɣ drill 3 holes at one end of the plastic sl...

  • Page 22

    Qty description 2 center slide brace 24 screw pfh 8x3 1 slide rail 8' green right 1 slide rail 8' green left slide rail 8' green left slide rail 8' green right center slide brace 8 foot slide assembly phase 2 phase notes Ɣ place 1 slide rail on a flat surface and begin inserting slide bed at the bot...

  • Page 23

    Qty description label 1 left upright h74 4 ladder rung h76 8 screw pfh 8x2 qty description label 1 right upright h75 8 screw pfh 8x2 4 ft ladder phase 1 & 2 phase notes • assemble with hardware as shown. • center rungs in rail grooves. + + screw pfh 8x2 + screw pfh 8x2.

  • Page 24

    Qty description label 1 rear support m73 4 screw pfh 8x2 4 ft ladder phase 3 phase notes • assemble with hardware as shown. Screw pfh 8x2 0

  • Page 25: Swing Beam Assembly

    Step 1 attach (2) qz triangle plates to sb74 swing beam using 1-3/4" bolts, lock washer and 7/8" barrel nut. Attach (2) gd l brackets to sb74 swing beam using 2-3/4" hex bolts, flat washers and 5/16" lock nuts. Swing beam assembly 6% 4= *' sb74 - swing beam - w102304 2"x5 1/4"x89 1/2" (50x134x2274) ...

  • Page 26: Swing Beam Assembly

    Step 2 insert (2) 2-1/2" bolts, lock washers and 1-1/2" barrel nuts into top edge of w71 swing beam support, as shown. Attach e77 angle braces to w71 swing beam support using 4- 1/2" bolts, lock washers and 7/8" barrel nuts. Attach h79 end support to e77 a ngle braces using 2" bolts, lock was hers a...

  • Page 27: Swing Beam Assembly

    Step 3 attach (2) qz triangle plates to w71 swing beam support using (2) 1-3/4" bolts, lock washers and 7/8" barrel nuts (fig.1). Insert (4) swing hanger quick links into (4) ex bushings and then attach swing hanger quick links to ew glider supports using (4) flat washers and 5/16" lock nuts, as sho...

  • Page 28

    Yellow & green glider 38.5" notes ‡ assemble with accessories as shown. Qty. Description label 2 5/16 lock nut cj 2 8x27 flat washer cd 2 bolt wh 5/16x5-3/4 ae 4 quicklink fa 2 green arm glider dk 1 yellow seat dl 4 38.5" green chain '* chain green 38.5" glider arm byd green bolt wh 5/16x5-3/4 glide...

  • Page 29: Monkey Bar Assembly

    Step 1 you will build a left and right top rail in this step. After building left assembly as shown, repeat steps for a right assembly. See below for oreintation of right side triangle plate. Assemble with hardware as shown. Monkey bar assembly qz - triangle plate 100 5 hole - a100294 nut lock 5/16 ...

  • Page 30: Monkey Bar Assembly

    Monkey bar assembly step 2 assemble with hardware as shown. Repeat process for other side of monkey bar assembly. ( ( 4= 4= bolt wh 5/16x1-1/2 t-nut 5/16 e78 - monkey bar upright - w102370 1 3/8"x3 3/8"x74 3/4" (36x86x1900).

  • Page 31: Monkey Bar Assembly

    Step 3 assemble as shown into pre-drilled holes. Monkey bar assembly ec - metal rung 559 - a100045 (& (& ( ( ( ( screw tapping 14x1-1/2.

  • Page 32: Monkey Bar Assembly

    Step 4 assemble as shown. Monkey bar assembly ( ( + + + bolt hex 5/16x2-3/4 washer lock int 8x15 washer flat 9x18 t-nut 5/16 nut barrel wh 5/16x7/8 washer lock ext 12x19 washer lock ext 8x19 lag screw wh 5/16x2 bolt wh 5/16x1-1/2 h81 - monkey bar brace - w100993 1"x3 3/8"x53 1/4" (24x86x1352) h82 - ...

  • Page 33: Monkey Bar Assembly

    Step 5 assemble with hardware as shown. Monkey bar assembly ea - hand grip yellow plastic - a100043 lag screw wh 1/4x1-1/2 washer lock ext 6x15 ( ( ea ea.

  • Page 34

    )ruw$vvhpeo\ 3kdvh 3kdvh1rwhv • assemble with hardware as shown. • for ease during assembly, assemble uprights flat on the ground. +dugzduhqhhghg • (26) d - nut barrel wh 5/16x7/8 - h100005 • (26) ad - washer lock ext 12x19 - h100031 • (30) ac - washer lock ext 8x19 - h100030 • (8) k - bolt wh 5/16x...

  • Page 35

    )ruw$vvhpeo\ 3kdvh 3kdvh1rwhv • assemble with hardware as shown. 3duwvqhhghg • (3) k4 - wall rail - w101093 • (1) k3 - double arch rail - w101092 • (1) g1 - wall rail - w102379 • (1) g2 - wall rail - w102378 +dugzduhqhhghg • (24) z - lag screw wh 5/16x2 - h100027 • (24) ac - washer lock ext 8x19 - h...

  • Page 36

    )ruw$vvhpeo\ 3kdvh 3kdvh1rwhv • assemble with hardware as shown. 3duwvqhhghg • (10) m4 - floor board - w102380 • (2) l1 - outer floor board - w101110 • (4) j1 - floor support - w101037 • (1) h1 - floor joist - w102377 +dugzduhqhhghg • (66) bp - screw pfh 8x1-1/2 - h100086 • (8) bs - screw pfh 8x1-3/...

  • Page 37

    3kdvh1rwhv • assemble with hardware as shown. )ruw$vvhpeo\ 3kdvh step 3: attach wall rail 'm17' to 'e1' & 'e2' using safe-t-fuse hardware, as shown. 3duwvqhhghg • (2) m17 - wall rail - w101114 • (1) m7 - wall rail - w101099 • (1) m11 - wall rail - w101116 +dugzduhqhhghg • (6) ac - washer lock ext 8x...

  • Page 38

    )ruw$vvhpeo\ 3kdvh 3kdvh1rwhv • assemble with hardware as shown. Note: it is vital that the fort be level before and after each phase of assembly. 3duwvqhhghg • (1) m3 - angle brace - w101121 +dugzduhqhhghg • (2) ac - washer lock ext 8x19 - h100030 • (2) ad - washer lock ext 12x19 - h100031 • (1) h ...

  • Page 39

    )ruw$vvhpeo\ 3kdvh 3duwvqhhghg • (3) ej - l bracket green 54x67 - a100053 • (1) n1 - center rail - w101113 • (13) m14 - wall slat - w101115 +dugzduhqhhghg • (6) bl - screw tapping 14x3/4 - h100083 • (54) br - screw pfh 8x1-1/8 - h100088 step 1: attach l bracket 'ej' to the side of center rail 'n1' u...

  • Page 40

    )ruw$vvhpeo\ 3kdvh 3kdvh1rwhv • assemble with hardware as shown. 3duwvqhhghg • (2) ea - hand grip yellow plastic - a100043 +dugzduhqhhghg • (2) ch - screw tapping 14x1-1/2 - h100109 • (4) ce - washer flat 9x18 - h100106 • (4) cg - washer lock int 8x15 - h100108 • (2) be - t-nut 1/4" - h100072 • (2) ...

  • Page 41

    )ruw$vvhpeo\ 3kdvh 3kdvh1rwhv • assemble with hardware as shown. • the roof assembly attaches differently on back of the fort then it does on the front. 3duwvqhhghg • (2) m12 - tarp brace - w101089 • (1) e5 - upright - w101085 • (1) e6 - upright - w101120 • (1) m5 - tarp support - w101125 +dugzduhqh...

  • Page 42

    )ruw$vvhpeo\ 3kdvh 3kdvh1rwhv • assemble with hardware as shown. 3duwvqhhghg • (8) m15 - wall slat - w101126 +dugzduhqhhghg • (32) br - screw pfh 8x1-1/8 - h100088 step 1: attach one end of each wall slats 'm15' to the inside of 'k2' & 'm2' with screws 'br' , as shown. Make sure to space the wall sl...

  • Page 43

    3kdvh1rwhv • assemble with hardware as shown. )ruw$vvhpeo\ 3kdvh 3duwvqhhghg • (4) d1 - picnic table support brace - w101117 +dugzduhqhhghg • (8) ac - washer lock ext 8x19 - h100030 • (8) d - nut barrel wh 5/16x7/8 - h100005 • (8) ad - washer lock ext12x19 - h100031 • (6) m - bolt wh 5/16x2-1/2 - h1...

  • Page 44

    )ruw$vvhpeo\ 3kdvh 3kdvh1rwhv • assemble with hardware as shown. +dugzduhqhhghg • (12) bp - screw pfh 8x1-1/2 - h100086 • (6) br - screw pfh 8x1-1/8 - h100088 3duwvqhhghg • (6) m10 - picnic table board - w101118 • (2) n3 - tie slat - w101119 step 1: attach 'n3' tie slate to 'm10' picnic table board ...

  • Page 45

    )ruw$vvhpeo\ 3kdvh 3kdvh1rwhv • assemble with hardware as shown. 3duwvqhhghg • (2) n2 - tie slat - w101103 • (4) l2 - outer wall slat - w101100 • (12) m13 - wall slat - a101101 • (6) m16 - center wall slat - a101102 +dugzduhqhhghg • (86) br - screw pfh 8x1-1/8 - h100088 3 3 /4 " n2 br l2 m13 m13 m16...

  • Page 46

    )ruw$vvhpeo\ 3kdvh 3kdvh1rwhv • assemble with hardware as shown. Bc eb m13 m13 bc eb m13 step 1: attach 'eb' plastic window frame to each window opening using screws 'bc' , as shown. +dugzduhqhhghg • (8) bc - screw pwh 8x3/4 - h100070 • (2) ac - washer lock ext 8x19 - h100030 • (2) z - lag screw wh ...

  • Page 47

    )ruw$vvhpeo\ 3kdvh 3kdvh1rwhv • assemble with hardware as shown. 3duwvqhhghg • (2) m23 - door board - w100922 • (1) m21 - door board - w100919 • (1) m20 - door board - w100920 • (2) m18 - door board - w100918 • (2) m22 - door board - w100921 • (3) o1 - door support - w100923 • (1) o2 - door mounting...

  • Page 48

    )ruw$vvhpeo\ 3kdvh 3kdvh1rwhv • assemble with hardware as shown. Bc k4 bc m5 jz jz 3duwvqhhghg • (1) jz - picnic tarp - a100143 +dugzduhqhhghg • (8) bc - screw pwh 8x3/4 - h100070 step 1: attach 'jz' picnic tarp to 'k4' wall rail using screws 'bc', as shown. Step 2: attach 'jz' picnic tarp to 'm5' t...

  • Page 49

    )ruw$vvhpeo\ 3kdvh br n4 l3 de bl n6 cy hc n5 n6 bl de l3 cy n6 n4 hc n5 3duwvqhhghg • (4) l3 - rafter - w100913 • (2) n4 - horizontal sunburst - w100914 • (2) n5 - vertical sunburst - w100915 • (4) n6 - angled sunburst - w100916 • (2) de - plate fort 5 hole green - a100011 • (2) hc - byd id tag 201...

  • Page 50

    )ruw$vvhpeo\ 3kdvh 3kdvh1rwhv • assemble with hardware as shown. Step 1: attach roof rafter assemblies to 'e1', 'e2', 'e3', and 'e4' uprights using safe-t-fuse hardware, as shown. Step 3: flush another 'k91' roof slat to the one just installed and then eleven more to each side, using screws 'bq', as...

  • Page 51

    6olgh$wwdfkphqw 3kdvh +dugzduhqhhghg • (3) b - nut barrel wh 5/16x5/8 - h100004 • (3) ad - washer lock ext 12x19 - h100031 • (3) cm - bolt wh 5/16x1/2 - h100115 3duwvqhhghg • (1) wave slide assembly step 3: attach the slide assembly to the fort floor using the safe-t-fuse hardware, as shown. Step 1:...

  • Page 52

    6zlqj%hdp$wwdfkphqw 3kdvh 3kdvh1rwhv • assemble with hardware as shown. 3duwvqhhghg • (1) swing beam assembly +dugzduhqhhghg • (4) bg - t-nut 5/16 - h100074 • (4) bx - washer split 5/16 - h100095 • (4) cd - washer flat 8x27 - h100105 • (4) aj - bolt hex 5/16x1-1/4 - h100042 step 1: attach the swing ...

  • Page 53

    0rqnh\%du$wwdfkphqw 3kdvh 3duwvqhhghg • (1) monkey bar assembly 3kdvh1rwhv • assemble with hardware as shown. +dugzduhqhhghg • (4) ad - washer lock ext 12x19 - h100031 • (4) b - nut barrel wh 5/16x5/8 - h100004 • (4) cm - bolt wh 5/16x1/2 - h100115 step 1: attach the monkey bar assembly to 'k5' monk...

  • Page 54

    $qfkrulqj,qvwuxfwlrqv 3kdvh 3kdvh1rwhv • assemble with hardware as shown. • failure to use stakes can void warranty & cause injury! 3duwvqhhghg • (8) kd - plastic ground stake - a100179 • (4) ez - chain green 51.25" - a100068 • (4) fa - quick link - a100069 • (2) fb - swing seat yellow - a100070 • g...

  • Page 55

    Rev5/20/10 brs limited warranty this limited warranty by backyard discovery applies to products manufactured under the backyard discovery brand or its other brands including but not limited to backyard botanical, adventure playsets, and leisure time products. Backyard discovery warrants that this pr...