BACtrack Trace User Manual - page 7
PRECAUTIONS
1. Wait at least 20 minutes after drinking, eating or
smoking before testing. Not observing this waiting
period can cause inaccurate readings and damage
the sensor.
2. Do not blow smoke, food, or liquids into the
BACtrack as this will damage the sensor.
3. Do not test in areas with strong winds, smoke, or in
an area where a large amount of alcohol is being
consumed.
4. Avoid testing in the presence of any substances
that contain methyl alcohol, isopropyl alcohol or
acetone. These substances may interfere with the
results of the test.
5. Replace the two AAA batteries when the battery
indicator icon reaches one bar.
6. Send your tester in for periodic calibration service as
required. (See Calibration).
7. The BACtrack Breathalyzer is designed to be used in
a temperature range of 32-104 °F (0-40 °C).
8. You cannot use the results of this product in court.
9. Do not use the BACtrack as a tool to determine
whether you should operate a motor vehicle or
equipment, or perform any other dangerous act.
10. Do not drink and drive. Always have a designated
driver when alcohol is being consumed.
11
SPECIFICATIONS
Dimensions
4.25 x 1.875 x 0.625 inches
(11 x 4.7 x 1.7 cm)
Weight
3 oz (84 g)
With mouthpiece and batteries
Sensor
Technology
Xtend™ Fuel Cell Sensor
Technology
Detection
Range
0.000 – 0.400 %BAC
Memory
Displays results from last 10 tests
Power Supply
Two AAA alkaline batteries,
included
Battery Life
Approximately 1000 tests
Warm Up Time
10-20 seconds
Response Time
10 seconds
Sensor
Accuracy
+/- 0.005 %BAC @ 0.1 %BAC
Operating
Temperature
32-104 °F (0-40 °C)
10