Badger Basket 02211 Assembly Instructions - B C
1.6/0506
Page 3 of 4
STEP 4: See PICTURE 4. Position the table so that it’s resting on the END PANEL (D). Insert the
THREE SHELF PANELS (F) into the shelf grooves on the SIX SHELF RAILS (C) with the white sides
of the shelves facing up. Be sure the shelves are seated into the grooves on all three sides.
STEP 5: See PICTURE 5. Attach the SECOND END PANEL (D) to the TWO TOP RAILS (B) and
SIX SHELF RAILS (C) using EIGHT 1¾” BOLTS (E).
STEP 6: Note: This step can also be completed with the table upside down resting on the top which can make
it easier to position the parts and secure them with the screws.
See PICTURE 6A. Locate the SAFETY BELT (G) and slip one of the ends with the pre-made screw
hole between the TOP RAIL (B) and the TOP SHELF RAIL (C).
See PICTURE 6B. Using the pre-drilled hole on the underside of the TOP SHELF RAIL (C), secure
the end of the SAFETY BELT (G) and the METAL SUPPORT BAR (H) with ONE 5/8” SCREW (I).
Sandwich the end of the SAFETY BELT (G) between the metal bar and the top shelf rail as shown.
See PICTURE 6C. Repeat this step to secure the other end of the SAFETY BELT (G) and the other
end of the METAL SUPPORT BAR (H) using the second 5/8” SCREW (I).
F
F
F
PICTURE 4
D
PICTURE 5
D
PICTURE 6C
PICTURE 6B
G
C
B
H
B C
G
F
PICTURE 6A