Badger Basket 82P Operating Manual And Parts List

Summary of 82P

  • Page 1

    -1- model 82p™ 4-cycle propane powered earth auger operating manual/parts guide thank you for purchasing a badger earth auger. When properly maintained and serviced, we are confident your auger will provide you with many years of trustworthy performance. This manual contains operating and safety ins...

  • Page 2

    -2- congratulations on the purchase of your new propane-fueled badger propane earth auger. Your new earth auger is powered by a 4-stroke engine, which provides the following advantages: 1. No need to mix fuel and oil. 2. No priming or choking required to start engine. 3. Cleaner combustion process r...

  • Page 3

    -3- important safety precautions please read this manual carefully. Operate your equipment according to the safety instructions and recommendations found throughout this manual. Anyone who uses this equipment must read and fully understand the instructions and be familiar with its operation. To rece...

  • Page 4

    -4- assembly and disassembly of auger and powerhead e-z connect™ collar connect auger assembly to powerhead by sliding e-z connect™ collar down and pulling clevis pin out. Then slide auger assembly onto output shaft. Reinsert clevis pin through auger assembly and output shaft, then slide e-z connect...

  • Page 5

    -5- starting-operation-stopping instructions cold starting procedure: starting engine for the first time or after engine has cooled off or after running out of fuel. 1. The badger propane earth auger requires no choking or priming. 2. Squeeze throttle control with left hand and grasp starter handle ...

  • Page 6

    -6- badger 82p propane earth auger parts list ref. # part # description #used 1 4180 mitten grip recoil handle 1 2 4304 recoil assembly 3. 4305 recoil starter cup 1 4 4322 yellow engine shroud 1 5 4327 ignition coil 1 6 2519 handle plate 1 7 4048 throttle control assembly 1 8 4170 machine screw for ...

  • Page 7

    -7- 82 2655 clevis pin for 2” & 3” auger assembly 1 83 3503 shaft support clips 2.