1. DL manuals
  2. Badger Basket
  3. Baby & Toddler Furniture
  4. 83951
  5. Assembly Instructions Manual

Badger Basket 83951 Assembly Instructions Manual

Manual is about: EMPRESS ROUND BABY BASSINET White/Ecru with Belt

Summary of 83951

  • Page 1

    1.0/0115/tg model number*: empress round baby bassinet 83951 - white/ecru with belt if you need product parts, see below or page 2! Assembly instructions. Adult assembly required. Read all instructions before use. This manual is part of the product and must be kept for future reference. Version code...

  • Page 2: Before You Begin Assembly:

    1.0/0115/tg before you begin assembly: check all parts and hardware. If anything is missing or not satisfactory, please do not call the store or return the product to them. Please go online to http://www.Badgerbasket.Com/parts for assistance. Most problems are resolved promptly without you needing t...

  • Page 3: Or Crawl  -

    1.0/0115/tg • suffocation hazard - infants can suffocate: » in gaps between an extra pad and the side of the bassinet, » on soft bedding. Never add a mattress, pillow, comforter, or padding. Use only the pad and/or bedding provided by the manufacturer. If a sheet is used with the pad, use only the o...

  • Page 4

    Ax2 - right leg bx2 - left leg cx2 - leg brace dx2 - shelf rail ex1 - bed bottom fx1 - bed body gx4 - wheel hx1 - vinyl/foam pad ix1 - fitted fabric sheet jx1 - fabric liner/skirt lx8 - short bolt with regular nut mx8 - long bolt with regular nut kx1 - mesh shelf phillips screwdriver tool required (...

  • Page 5

    B a m c ×2 l m m m 1 l l mx8 2 lx4 - carefully note the angle and positions of the right and left legs (parts a and b). If assembled incorrectly, you will not be able to do step 4. - use wrench and screwdriver to tighten all bolts and nuts firmly, but do not overtighten - repeat this step to assembl...

  • Page 6

    E f 3.2 - unfold the bed body (part f) 3.1 - remove and discard the plastic caps used for shipping 3.3 and 3.4 - connect the frame ends to form a circle. The two locking silver buttons must snap through the holes to secure the frame! You may find it easiest to hold the frame perpendicular to the flo...

  • Page 7

    L l 6 5 - for steps 5 and 6: get all of the bolts (part l) started, then you may need to push on the legs and adjust the body to align all the tabs to secure them. - use wrench and screwdriver to tighten all bolts and nuts firmly, but do not overtighten - secure all four bolts (part l) in this step....

  • Page 8

    G g g g 7 - turn the bassinet upside down on a carpeted surface or on top of the product carton so as not to soil or damage it in this step. - after firmly inserting the wheels, turn the bassinet right side up again to continue assembly.

  • Page 9

    8 - dress the fabric liner/skirt (part j) onto the bed body (part f). - insert the vinyl/foam pad (part h) into the fabric fitted sheet(part i) and then place them into the bassinet. H i j 9 9.1 9.2 - thread the fabric belt (part n) through the belt loops on the fabric liner/skirt (part j) and tie i...