Badger Basket Elegance 00825 Assembly Instructions - Tools Needed:
5.1/0207/TG
TOOLS NEEDED:
Phillips Screwdriver*
Hammer
* Power screwdriver is helpful but
be careful not to damage the bassinet
PARTS INCLUDED:
(A) 2 - End Panels
(B) 2 - Rails
(C) 4 - Long Bolts
(D) 1 - Shelf
(E1,2,3) 4 each -
Wheels, Bolts, Knobs
(F) 4 - L-Brackets
(G) 16 - Short Bolts
(H) 1 - Bassinet Body
(not shown)
(I) 1 - Fabric Skirt
(J) 1 - Curved Canopy Pole
(not as shown)
(K) 1 - Canopy Frame
(L) 1 - Fabric Canopy
(M) 1 - Fabric Bumper
(N) 1 - Fitted Fabric Sheet
(O) 1 - Mattress
(not shown)
A
x2
B
x2
D
x1
I
x1
J
x1*
C
x4
Hardware not shown to scale
F
x4
*Part J is curved.
*It is not straight as shown.
E2
x4
G
x16
PARTS AND HARDWARE:
BEFORE YOU BEGIN ASSEMBLY:
Check all parts and hardware listed. If anything is missing, please
DO NOT call the store or return the product to them. Contact us for assistance. Most
problems are resolved without you needing to leave home. When emailing or calling us,
please have this instruction manual and your product model number ready.
For faster service, go to http://www.badgerbasket.com/parts
NOTE: Elegance
™
Round models should
be assembled in the room where you
intend to use it unless your doorways are
wider than 33” (83.8 cm).
Page 2 of 5
M
x1
L
x1
K
x1
N
x1
E1
x4
E3
x4