Bafo BF-4302 User Manual
USB2.0 4-PORT SLIM HUB
User’s Manual
Safety Instructions
1. Always read the safety instructions carefully
2. Keep this User’s Manual for future reference
3. Keep this equipment away from humidity
4. Lay this equipment on a reliable flat surface before setting it up
5. If any of the following situation arises, get the equipment checked by a service technician:
The equipment has been exposed to moisture.
The equipment has been dropped and damaged.
The equipment has obvious sign of breakage.
The equipment is not working properly or you cannot get it to work according to User’s Manual.
Overview
The USB 2.0 Hi-Speed Hub is compliant with the USB 2.0 Hi-Speed specification. It has 4 ports
which will connect either the new USB 2.0 Hi-Speed high performance peripherals or the legacy USB 1.1
devices. It’s providing easy plug and play USB expansion. Just like USB 1.1 you can connect as many as
127 devices to your computer using multiple USB 2.0 hubs. All ports are fully supported for compatibility
with bus-powered peripherals. Four LEDs to indicate the working status of devices.
System Requirement
PC System Environment
IBM compatible Pentium 233 or faster
64MB RAM
Microsoft Windows 98SE / ME / 2000 / XP
Available USB 2.0 port. A USB 2.0 host controller from motherboard or host card and USB 2.0 driver
with hub supported. It’s required for the USB 2.0 hub to work at hi-speed mode.
Macintosh System Environment
PowerMac blue or white G3 or greater, PowerBook G3 or greater, iBook or iMac
64MB RAM
Mac OS 10.1 or greater
Available USB 2.0 port. A USB 2.0 host controller from motherboard or host card and USB 2.0 driver
with hub supported. It’s required for the USB 2.0 hub to work at hi-speed mode.