Summary of BF-800
Page 1
User’s manual usb to serial adapter bf-800 bf-810
Page 2: Content
Usb to serial adapter user’s manual 1 content content 1. 1. Introduction introduction---------------------------------------------------------------------------------- ----------------------------------------------------------------------------------2 2 2. 2. Package content package content-------- ...
Page 3
Usb to serial adapter user’s manual 2 1. 1. Introduction introduction congratulations on your purchase of the usb-serial adapter. This device provides a simple and easy way to connect universal serial bus (usb) and serial port interface. With the advantage of usb port, users have the capability to u...
Page 4
Usb to serial adapter user’s manual 3 5. 5. Driver installation driver installation 5.1 windows ® 98 driver installation following the steps below to install windows ® 98 driver 5.1.1 power on your computer and make sure that the usb port is enabled and working properly. 5.1.2 plug in the usb-serial...
Page 5
Usb to serial adapter user’s manual 4 5.1.4 insert the usb-serial adapter software driver into the cd-rom drive and select specify a location and type the “ d:\driver\windows” in the dialogue (d: represents cd-rom) 5.1.5 windows® will detect the driver (serwpl.Inf) and shows the prolific usb-to-seri...
Page 6
Usb to serial adapter user’s manual 5 5.1.7 when windows ® finished installing the software, click “finish”. 5.1.8 after install the driver, you have to check the “control panel”- “system”-“device manager” to make sure the driver has already installed, you can see a usb to serial port (com3) under t...
Page 7
Usb to serial adapter user’s manual 6 5.2 windows ® 98 driver un-installation if you want to remove the usb-serial adapter driver, you can uninstall it by following the steps below: 5.2.1 unplug the usb-serial adapter from your pc. 5.2.2 run the d:\driver\windows\ uninstall.Exe from the software cd-...
Page 8
Usb to serial adapter user’s manual 7 5.3 windows ® me driver installation follow the steps below to install windows ® me driver 5.3.1 power on your computer and make sure that the usb port is enabled and working properly. 5.3.2 insert the usb-serial adapter software driver into the cd-rom drive and...
Page 9
Usb to serial adapter user’s manual 8 5.3.4 when windows ® finished installing the software, click “finish”. 5.3.5 after install the driver, you have to check the “control panel”- “system”-“device manager” to make sure the driver has already installed, you can see a usb to serial port (com3) under t...
Page 10
Usb to serial adapter user’s manual 9 5.4 windows ® me driver un-installation if you want to remove the usb-serial adapter driver, you can uninstall it by following the steps below: 5.4.1 unplug the usb-serial adapter from your pc. 5.4.2 run the d:\driver\windows\uninstall.Exe from the software cd- ...
Page 11
Usb to serial adapter user’s manual 10 5.5 windows ® 2000 driver installation follow the steps below to install windows ® 2000 driver: 5.5.1 power on your computer and make sure that the usb port is enabled and working properly. 5.5.2 insert the usb-serial adapter software driver into the cd-rom dri...
Page 12
Usb to serial adapter user’s manual 11 5.5.4 select the cd-rom drive and click “next” to continue. 5.5.5 windows ® will detect the driver (serwpl.Inf) and click “next” to continue. 5.5.6 click “finish” to finish the step..
Page 13
Usb to serial adapter user’s manual 12 5.5.7 after the step, you have to check the “control panel”-“system”- “hardware”-“device manager” and you can see the (prolific usb to serial comm port) under the ports (com & lpt).
Page 14
Usb to serial adapter user’s manual 13 5.6 windows ® 2000 driver un-installation if you want to remove the usb-serial adapter driver, you can uninstall it by following the steps below: 5.6.1 unplug the usb-serial adapter from your pc. 5.6.2 run the d:\driver\windows\uninstall.Exe from the software c...
Page 15
Usb to serial adapter user’s manual 14 5.7 windows ® xp driver installation follow the steps below to install windows ® xp driver: 5.7.1 power on your computer and make sure that the usb port is enabled and working properly. 5.7.2 insert the driver of usb-serial adapter into cd-rom drive and plug in...
Page 16
Usb to serial adapter user’s manual 15 5.7.5 as the windows appear as below, click the “finish” to continue. 5.7.6 after install the driver, you can see a new prolific usb-to-serial comm port (com3) under the ports (com&lpt)..
Page 17
Usb to serial adapter user’s manual 16 5.8 windows ® xp driver un-installation if you want to remove the usb-serial adapter driver, you can uninstall it by following the steps below: 5.8.1 unplug the usb-serial adapter from your pc. 5.8.2 run the d:\driver\windows\ uninstall.Exe from the software cd...
Page 18
Usb to serial adapter user’s manual 17 5.9 mac os 9 driver installation follow the steps below to install driver of usb-serial adapter: 5.9.1 power on your computer and make sure that the usb port is enabled and working properly. 5.9.2 insert the usb-serial adapter software driver into the cd-rom dr...
Page 19
Usb to serial adapter user’s manual 18 5.9.5 to make sure that your computer can use the device correctly, you have to check the “apple system profiler”-“device and volumes”. It will show the usb device 5.10 mac os 9 driver un-installation if you want to remove the usb-serial adapter driver, you can...
Page 20
Usb to serial adapter user’s manual 19 5.11.2 explore the folder and extract the md_pl2303_v105.Zip, it will create a prolificusbserial105.Pkg. 5.11.3 run the prolificusbserial105.Pkg and click “continue” to install the driver. 5.11.4 select a destination that you want to install the driver and clic...
Page 21
Usb to serial adapter user’s manual 20 5.11.5 click “upgrade” to install the software package. 5.11.6 after installed the driver, click “close” to finish this procedure. 6. 6. Setting up the rs232 serial device setting up the rs232 serial device follow the steps below to connect your rs232 serial de...
Page 22
Usb to serial adapter user’s manual 21 6.4 after finishing these processes, you can use usb to serial bridge cable to connect rs232 serial 56k fax modem and execute the dial-up function to connect internet, and send the fax with the fax software (i.E.: microsoft fax) properly. 7. 7. T r o u b l e s ...
Page 23
Usb to serial adapter user’s manual 22 this device generates and uses radio frequency and may cause interference to radio and television reception if not installed and used properly. This has been tested and found to comply with the limits of a class b computing device in accordance with the specifi...