1. DL manuals
  2. Bafo
  3. Computer Accessories
  4. BF-816 USB to Serial 2 Port
  5. User Manual

Bafo BF-816 USB to Serial 2 Port User Manual

Manual is about: USB to Serial 2 Port

Summary of BF-816 USB to Serial 2 Port

  • Page 1

    Bf-816 usb to serial 2 port user’s manual 1 user’s manual bf-816 usb to serial 2 port 1. Introduction congratulations on your purchase of the bf-816 usb to serial 2 port. This device provides bridging between the universal serial bus (usb) input and two enhanced uart ports. This device contains all ...

  • Page 2: Driver Installation

    Bf-816 usb to serial 2 port user’s manual 2 5. Driver installation 5.1 windows ® 98se & me & 2000 installation notice: before you install the driver to your computer, please do not connect the bf-816 usb to serial 2 port to your computer. 5.1.1 turn on the power of computer and make sure the usb por...

  • Page 3

    Bf-816 usb to serial 2 port user’s manual 3 5.2 windows ® xp installation notice: before you install the driver to your computer, please do not connect the bf-816 usb to serial 2 port to your computer. 5.2.1 turn on the power of computer and make sure the usb port is enabled and can working properly...

  • Page 4

    Bf-816 usb to serial 2 port user’s manual 4 5.2.6 click “exit” to end this installation. 5.2.7 plug the bf-816 usb to serial 2 port into usb port of pc. Windows® will detect an usb device. 5.2.8 select “install the software automatically (recommended)”, then click “next” to continue. 5.2.9 when the ...

  • Page 5

    Bf-816 usb to serial 2 port user’s manual 5 5.2.10 click “finish” to end of hardware update wizard. 5.2.11 select “install the software automatically (recommended)”, then click “next” to continue. 5.2.12 when the windows appear as below, click “continue anyway” to install the driver..

  • Page 6

    Bf-816 usb to serial 2 port user’s manual 6 5.2.13 click “finish” to end of hardware update wizard. 5.2.14 select “install the software automatically (recommended)”, then click “next” to continue. 5.2.15 when the windows appear as below, click “continue anyway” to install the driver..

  • Page 7

    Bf-816 usb to serial 2 port user’s manual 7 5.2.16 click “finish” to end of hardware update wizard. 5.2.17 your new hardware is installed and ready to use. You will see some information on the “device manager”. Usb compound device usb -to- serial port driver(com3) usb -to-serial port driver(com4).

  • Page 8

    Bf-816 usb to serial 2 port user’s manual 8 5.3 mac installation notice: before you install the driver to your mac, please do not connect the bf-816 usb to serial 2 port to the mac. 5.3.1 power on your mac and make sure that usb port is enabled and working properly. Put the driver cd into the cd-rom...

  • Page 9

    Bf-816 usb to serial 2 port user’s manual 9 5.3.4 click “install” to continue. 5.3.5 select “continue installation” to continue. 5.3.6 select “restart” will reboot your system. 5.3.7 now connect the bf-816 usb to serial 2 port device to usb port..

  • Page 10

    Bf-816 usb to serial 2 port user’s manual 10 5.3.8 check whether the driver is loaded by typing “kextstat” at terminal (console). You will see “com.Moschip.Driver.Moschipusbethernet.Kext” in loaded driver if it is successfully loaded. 5.3.9 you can go to “system preferences”- “network”. You will see...

  • Page 11

    Bf-816 usb to serial 2 port user’s manual 11 6. Setting up the rs232 serial device follow the steps below to connect your rs232 serial device (i.E.: modem) to the usb port of your pc: 6.1 turn off your modem. Plug the db 9 connector of the bf-816 usb to serial 2 port into your modem. Connect the oth...

  • Page 12

    Bf-816 usb to serial 2 port user’s manual 12 7. Disclaimer information in this document is subject to change without notice. The manufacturer does not make any representations or warranties (implied or otherwise) regarding the accuracy and completeness of this document and shall in no event be liabl...