Baird TI24013DBR User Manual - page 6
6
Please save your packaging as you will need this in the event of warranty/service repair or support. We are
unable to carry out warranty/service if you are unable to package it correctly. The safest way to package your
item in the event of warranty/service repair is in it’s original box/packaging.
WHAT IS INCLUDED IN THE BOX
Accessories
Included with this TV are the following accessories:
1 x User Guide
1 x Quick Start Guide
2 x AAA Batteries
1 x TV
1 x Remote Control
User Guide
Model: TI24013DBR
A3./=-/8
Please read this Manual carefully before using this product and retain for future reference.
QUICK START GUIDE
Easy 6 step installation
Please read the section on SAFETY before proceeding with your installation.
Thank you for purchasing this Baird TV. Remove the TV from the packaging and follow these simple steps to quickly start using your television.
To fully understand the features and safety advice of your LED TV, we strongly recommend that you read the enclosed manual thoroughly.
1
4
2
5
3
6
Insert the Stand Base into the bottom of the LED TV body and tigten
the screws.
Insert two UM-4 (AAA) batteries into the remote control. Take care to
observe correct polarity.
Insert the aerial cable into the RF socket.
Switch on the TV by pressing the power button on the top of the TV
or on the remote control. (The LED will change from red to green)
Connect the power cord to the
Adaptor and the output of the
adaptor to the TV DC IN Socket, then
plug the other end of the power cord
into a suitable wall socket. Switch
on the power to the TV.
The screen will light up after about 5 seconds and the FIRST TIME
INSTALLATION will come on the screen. Check the OSD Language
and Country are set to “English” and “UK respectively. Use the
arrow RIGHT and LEFT buttons to change if necessary. Press “OK”
to confi rm. Auto Tuning will start, this will take a few minutes. On
completion the TV will store all DIGITAL TV and RADIO Programmes
available in your area and then display the fi rst Channel found
which is normally BBC1.
For all other Setup Information please refer to your User Manual.
Power indicator
1 x Bottom Stand
1 x Mains Adapter /
Power cord
Stand Fixing Screws
What is included in the box
1 x Mini YPbPr Cable
2 Pairs of 3D glasses