Baird TI2402DVDBC User Manual - page 7
7
Important installation instructions
Detaching the Stand
To remove the stand remove the screws in the circled area and the neck will
come off .
IMPORTANT - Before drilling any holes in the wall ensure you are not
drilling where there could be any electric wires, water or gas pipes.
Wall mounting the TV
This television requires a VESA 100 x 100 wall mount, or equivalent.
1) Your TV is provided with four hexagonal spacers to attach your wall mount.
2) The wall mount can now be easily attached to the spacers using suitable screws. The positions of the spacers
is indicated in the diagram below.
Important – If wall mounting this TV, only use the spacers already provided in the wall mounting holes. Using
other screws which are longer could cause irreparable damage to internal parts.
For optimum viewing, if wall mounting the TV higher than eye level, the TV should be tilted downwards so
that the TV’s screen is ‘face on’. See fi g 1 and 2
Vi
fi g 2
TV
ewing angle
TV
Viewing angle
fi g 1
ATTACHING / DETACHING THE STAND
Attaching the Stand
IInsert the stand into the bottom of the LED TV body and tigten the screws.