Baja Motorsports DB30 Service Bulletin

Summary of DB30

  • Page 1

    B a c locate carburetor (a) on mini bike. If fuel is leaking turn fuel valve to “off” position. Fuel hose not hooked up: check to make sure fuel line (b) is attached to both gas tank and carburetor. Check fuel line for leaks. Bolts loose or missing from bottom of bowl: locate bolts (c) on bottom of ...

  • Page 2

    3. Remove carburetor bowl (d) by removing bottom bolt (c) c d 5. Remove float swing pin (h) from bracket. If needed, remove pin with a pair of needle nose pliers. H 4. Check movement of needle valve (j) when float (i) is moved gently up and down. Needle valve should move freely. If needle valve stic...

  • Page 3

    6. Gently remove float (i) and needle valve assembly (j) from carburetor. If needle valve (j) is stuck, spray carburetor cleaner on needle valve area and gently work loose 7. With carburetor bowl, float and needle- valve assembly removed, spray carburetor cleaner up in needle valve hole (k). I j nee...

  • Page 4

    8. Remove needle valve (j) and spring (l) from float assembly. Note spring placement for re-assembly. Clean parts with carburetor cleaner. J l 9. Re-assemble needle valve float assembly and install back in carburetor by following instructions in reverse order. Make sure needle valve moves freely in ...