Bajaj CT-100 User Manual

Summary of CT-100

  • Page 1

    Dear customer, congratulations on choosing bajaj ct-100 motorcycle, one of the finest motorcycles in the country brought to you by bajaj auto limited. Before you prepare for riding, please read this user's guide carefully to familiarize yourself with the mechanism and the controls of the vehicle. To...

  • Page 2

    Table of contents description identification data....................................................................................................................................1 technical specifications................................................................................................

  • Page 3

    Technical specifications engine : 4 stroke, single cylinder, natural air cooled, si engine. Bore x stroke : 53.0 mm x 45.0 mm eng. Displacement : 99.27 cc compression ratio : 9.5 + 0.5 : 1 idling speed : 1300 + 150 rpm max. Net power : 6.03kw (8.2ps) at 7500 rpm ignition system : c.D.I. Spark plug :...

  • Page 4

    Location of parts 3 1. Speedometer : the speedometer pointer shows the speed of vehicle. 2. Odometer : the odometer shows the total distance that the vehicle has accumulated. 3. Neutral indicator : when the transmission is in neutral and ignition switch ‘on’, the neutral indicator is lit. (symbol is...

  • Page 5

    A b c d location of parts left handle bar switches a. Dipper switch : when headlight is on, high or low beam can be selected with the dipper switch. Hi beam indicator light located on speedo console will light up when high beam is selected. : high beam : low beam b. Turn signal switch : when the tur...

  • Page 6

    Location of parts right handle bar switches e. Head light switch : it has 3 positions. F. Ride control switch : the function of ‘ride control’ is to make rider to sense economy zone of throttle for better fuel efficiency. When ‘ride control’ is in ‘on’ position, on opening the throttle, at particula...

  • Page 7

    Side cover rh d b a a b c side cover rh caution : fit cover as described above to ensure proper fitment. Location of parts 9 fitment of side cover lh & rh • match slot (b) provided on front side of ‘side cover’ with bracket provided on ‘fuel tank’ and slide ‘side cover’ backward (towards tail lamp)....

  • Page 8

    A a1 a2 how to ride your bike 12 running in riding the bike proper running-in is important for the better life & trouble free performance of the vehicle. • during first 2000 kms running-in period do not exceed following speed limits. Kms 1st 2nd 3rd 4th 0 - 1000 15 30 45 55 1000 - 2000 20 40 60 75 •...

  • Page 9

    How to ride your bike 14 stopping the vehicle : • close the throttle completely. • shift the transmission into neutral. • bring the vehicle to complete stop. • turn the ignition switch off. Parking : • shift the transmission into neutral and turn the ignition switch off. • support the motorcycle on ...

  • Page 10

    • always wear helmets while driving or riding. Your helmets should confirm to appropriate standards. • read thoroughly the instructions in this manual and follow them carefully. • avoid unnecessary accessories for the safety of both rider and other motorists. • get familiar and follow traffic rules ...

  • Page 11

    Drive chain slackness • chain top edge to be kept between two marks during chain slackness adjustment. • care should be taken, that the chain should never run dry. • lubricate chain from outside with sae 90 oil at every 500 kms. • chain slackness will have to be adjusted whenever required. Wheel pun...

  • Page 12

    Before riding the motorcycle be sure to check the following items. Please give proper importance to these checks and perform all of them before riding the motorcycle. If any irregularities are found during these checks, refer to the maintenance chapter and see authorised dealer / service center for ...

  • Page 13

    Note - more frequent cleaning may be required when driving in dusty condition. Periodic maintenance & lubrication chart 21 1. Servicing 3 3 3 3 3 3 3 1st - 750 kms / 30 days 2nd onward @5000 kms 2. Engine idling speed / co% a a a a a a a a 3. Valve tappet clearance a a a a a a a a 4. Engine oil r r ...

  • Page 14

    Periodic maintenance & lubrication chart 23 33. Drive chain ‘o’ ring type (if applicable) l at every 500 kms 34. Drive chain remove, clean, inspect' & lubricate (o/h) cl, l cl, l cl, l cl, l at every 10000km 35. Drive chain link lock r r r r replace at every 10000km 36. Wheel brg (for non sealed brg...

  • Page 15

    Applicable to all paid services 25 1. Wash the vehicle. 2. Change / top up engine oil as per periodic maintenance schedule. 3. Clean air filter element. (replace element at every 15,000 kms). 4. Check all fuel lines. (replace fuel pipes at every 20,000 kms). 5. Clean oil strainer / centrifugal filte...