Bajaj Discover DTS-i User Manual - page 7
Location of Parts
Right Handle Bar Switches
E. Head Light Switch :
It has 3 positions.
F. Starter Button :
Applicable only for vehicle
with ‘Self (Electric) Start’ provision. Starter
button operates electric starter when clutch
lever is depressed with transmission in any
gear. It is recommended to start the engine
with transmission in neutral.
G. Ride Control Switch :
The function of ‘Ride
Control’ is to make rider to sense Economy
zone of throttle for better fuel efficiency.
When ‘Ride Control’ is in ‘ON’ position, on
opening the throttle, at particular position
one will feel slight resistance to the rotation
of throttle grip. This indicates the end of fuel
Economy zone. However throttle can be
rotated further to get higher speed. When
switch is in ‘OFF’ position, the resistance to
the throttle rotation is not sensed. Thus there
will be no indication of fuel Economy zone.
G
F
E
7
G
E
For Kick
Start
For Electric
Start
All lamps 'OFF'.
While engine running, Tail lamp, Meter
lamp and Pilot lamp/s ‘ON’.
While engine running, Head lamp, Pilot
lamp, Tail lamp and Meter lamps ‘ON’.
Removal of Side Cover LH
•
Insert the key into the cover lock (A) and
turn the key clockwise.
•
Hold the cover with both hands and pull
front side first (B) & rear side later (C).
Take out ‘Side cover’.
Fitment of Side Cover LH
•
Match rear side (C) of ‘Side Cover’ lug
with hole located on chassis and press
the ‘Side Cover’.
•
Match Lug (B) provided on front side of
‘Side Cover’ with hole provided on ‘Fuel
Tank’ and press ‘Side Cover’ inside.
•
Match the ‘Side Cover’ properly with
bracket provided on ‘Chassis’ and Lock
(A) the ‘Side Cover’.
CAUTION :
Remove cover as described
above, otherwise the lugs may break.
A
B
C
Location of Parts
8