Bajaj Storage Water Heater User Manual

 bajaj electricals limited                                                                           Page 1 of 8 

KNOW YOUR 

bajaj 

Storage Water Heater  

The Energy Efficient Range  

Dear Customer, 

Congratulations! You are now the proud owner of an Energy Efficient Bajaj Storage Water Heater, the most 

durable, dependable and safe product in the market today. And we mean what we say. 

Why? Because we at Bajaj understand your concern, your need for reassurance. So we designed our Storage Water 

Heaters with one single minded objective - Safety. Total protection for you and your family, for years to come. 

This manual will answer all your questions and remove your doubts. We have provided a detailed description of our 

Storage Water Heaters and clear instructions for Installation and operation. Read this manual carefully, follow the 

instructions and we guarantee you will never have to worry about your Storage Water Heaters again. 

KNOW YOUR BAJAJ STORAGE WATER HEATER

How does It function?

1. 

Every Bajaj Storage Water heater unit is made of 

a. an outer body, inner tank, heating element 

b. safety devices like Safety valve, Thermostat, Thermal cut-out, Fusible plugs and 

c. Thermal insulation to retain heat.

2. 

Water comes into the inner tank through the inlet pipe at normal working pressure of about 30 P.S.I.

3. 

When the tank is full (this becomes clear when water starts flowing through the outlet) close the outlet and 

switch ON the power supply.

4. 

The heating element heats up the water to a pre-fixed temperature. At this point the Thermostat 

automatically switches OFF the power supply to the unit which is indicated by the switching OFF of green 

lamp.

5. 

You can now take the water out through the outlet. Because of the design of the heater & displacement 

principle, fresh cold water keeps entering through the inlet.

6. 

As temperature of water inside the tank drops, the Thermostat again switches ON the power supply to the 

heater. When this happens, water starts heating up again. This process continues till you switch OFF the 

main power supply to the heater after usage.

7. 

Since it takes a longer time for the water to heat up in storage water heater. it is advisable to switch ON the 

power supply to the unit well in advance of the actual usage.

8. 

During normal functioning, red lamp does not glow. In case it glows, call the nearest Bajaj Sales and Service 

Centre as it indicates that thermostat may be defective.