1. DL manuals
  2. Bake Max
  3. Cooktop
  4. BAFA2M
  5. Installation And Operation Manual

Bake Max BAFA2M Installation And Operation Manual

Summary of BAFA2M

  • Page 1

    User guide hot plate installation operation bafa2m models bafa4m bafa6m manual and 170 millennium blvd, moncton, nb, e1e2g8 3601 pinnacle point dr, dallas, tx 75211 toll free: 1-800-565-bake(2253) telephone: 1-506-858-8990 fax: 1-506-859-6929 e-mail: sales@bakemax.Com web site: www.Bakemax.Com.

  • Page 2

    * * * * * * * * * w a r r a n t y t e r m metalÚrgica venncio ltda offers a warranty to manufactured equipment as is specified below: every alleged manufacturing defect must be analysed only by technical assistance from venncio. When proven, an eventual manufacturing defect repair will be free of ch...

  • Page 3

    Index 1. Dear user 2. Important notes 3. Before using the equipment for the first time 4. Installation instructions 5. Operation 6. Maintenance 7. Technical data 8. Exploded view drawing 9. Parts list warranty term 3 3 3 4 8 9 10 11 12 13 9. Parts list 13 hot plate.

  • Page 4

    1. Dear user 2. Important notes 3 12 * attention: this equipment is intended for commercial / professional use. * please keep this manual with care. He is and will be very helpful when in doubt. Check it out. * installation must be carried out according to the manufacturer's instructions and by qual...

  • Page 5

    4 4. Installation instructions the gas pressure regulator provided with the equipment must be installed when the appliance is connected to the gas supply. The area around the appliance must be kept free and clear of combustibles such as solvents, cleaning liquids, brooms, rags, etc. Proper clearance...

  • Page 6

    5 10 hot plate hot plate gas connection - the gas inlet line size of this appliance is 3/4" npt. For proper operation, the gas supply service line must be the same size or greater than the inlet line size of the appliance. The gas line size must not be reduced at any point along the supply line. Man...

  • Page 7

    6 9 hot plate hot plate visually double check any installer-supplied intake pipes and/or blow them out using compressed air to clear any dir t or debris, threading chips, or other foreign matter before installing a service line. Those par ticles will clog gas ori ces when gas pressure is applied. Co...

  • Page 8

    8 7 hot plate hot plate propane gas conversion instructions a hot plate is equipped with xed ori ce hoods and shipped from the factory for use on natural gas. To convert to propane gas, install the propane burner ori ce hoods supplied as follows: 1 - remove the top grate. 2 - slide the burners back ...