Bakker Elkhuizen UltraBoard 940 User Manual - page 5
Pairing the UltraBoard 940 in Windows
Pairing the UltraBoard 940 in Mac OS X
1. Start wireless mode by making sure the USB cable is detached
and the keyboard is power on.
2. Choose your operating system:
• Fn + W
Windows
• Fn + A
iOS / OSX
• Fn + A
Android
3. Choose the host number you would like to program, do this by
holding the “Fn” key and pressing 1, 2, 3, 4, or 5 (after a power
switch of the keyboard, host 1 is automatically selected. Some
use this for your most used device).
4. Click on the Bluetooth icon in your Windows settings and
choose “Device Search”.
5. Press the pairing button underneath the keyboard.
6. In the list of found Bluetooth devices the UltraBoard Keyboard
will be shown. Press this device and continue.
7. A identification code will be shown by Windows (6-digit ID).
Enter the code on the keyboard and press Enter.
8. The UltraBoard keyboard is now ready to use and is marked as
connected.
1. Start wireless mode by making sure the USB cable is detached
and the keyboard is power on.
2. Choose your operating system:
• Fn + W
Windows
• Fn + A
iOS / OSX
• Fn + A
Android
3. Choose the host number you would like to program, do this by
holding the “Fn” key and pressing 1, 2, 3, 4, or 5 (after a power
switch of the keyboard, host 1 is automatically selected. Some
use this for your most used device).
4. Click on the Bluetooth icon in your system preferences, make
sure the Bluetooth is activated.
5. Press the pairing button underneath the keyboard.
6. Click the “+” tab (set up new device) to start the search for new
devices. Now the list will show the UltraBoard Keyboard.
7. Press Connect, an identification code will be shown (8-digit ID).
Enter the code on the keyboard and press Enter.
8. The UltraBoard keyboard is now ready to use and is marked as
connected.
Make sure that you have Bluetooth support on your PC
and Windows 7 or higher installed.
Make sure that you have Bluetooth support
and Mac OS X 10.5.x or higher installed.